Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T16:47:19.395Z Has data issue: false hasContentIssue false
  • English
  • Français

An Analysis of the Large Deflections of Beams using the Rayleigh-Ritz Finite Element Method

Published online by Cambridge University Press:  07 June 2016

A. C. Walker  and
D. G. Hall
A. C. Walker
Affiliation:
Department of Civil and Municipal Engineering, University College, London
D. G. Hall
Affiliation:
Department of Civil and Municipal Engineering, University College, London
Get access

Summary

The Rayleigh-Ritz finite element method is used to obtain an approximate solution of the exact non-linear energy functional describing the large deflection bending behaviour of a simply-supported inextensible uniform beam subjected to point loads. The solution of the non-linear algebraic equations resulting from the use of this method is effected, using three different techniques, and comparisons are made regarding the accuracy and computing effort involved in each. A description is given of an experimental investigation of the problem and comparison of the results with those of the numerical method, and of the available exact continuum analyses, indicates that the numerical method provides satisfactory predictions for the non-linear beam behaviour for deflections up to one quarter of the beam’s length.

Type
Research Article
Information
Aeronautical Quarterly , Volume 19 , Issue 4 , November 1968 , pp. 357 - 367
Copyright
Copyright © Royal Aeronautical Society. 1968

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Thompson, J. M. T. Localised Rayleigh functions for structural and stress analysis. International Journal of Solids and Structures. Vol. 3, p. 285, 1967.Google Scholar
2. Walker, A. C. Rayleigh-Ritz method for plate flexure. Journal of the Engineering Mechanics Division, American Society of Civil Engineers, Vol. 93, p. 139, December 1967.CrossRefGoogle Scholar
3. Zienkiewicz, O. C. The finite element method in structural and continuum mechanics. McGraw-Hill, 1967.Google Scholar
4. Proceedings of the Conference on Matrix Methods in Structural Mechanics, Session 3. Wright-Patterson Air Force Base, Ohio, 1965, pp. 397-604, AFF-TR-66-80, 1966.Google Scholar
5. Tong, Pin and Pian, T. H. H. The convergence of the finite element method in solving linear elastic problems. International Journal of Solids and Structures, Vol. 3, p. 865, September 1967.Google Scholar
6. Martin, H. C. On the derivation of stiffness matrices for the analysis of large deflection and stability problems. Proceedings of the Conference on Matrix Methods in Structural Mechanics. Wright-Patterson Air Force Base, Ohio, 1965, p. 697, AFF-TR-66-80, 1966.Google Scholar
7. Argyris, J. H. Continua and discontinua. Proceedings of the Conference on Matrix Methods in Structural Mechanics. Wright-Patterson Air Force Base, Ohio, 1965, p. 11, AFF-TR-66-80, 1966.Google Scholar
8. Thompson, J. M. T. and Walker, A. C. The non-linear perturbation analysis of discrete structural systems. International Journal of Solids and Structures, Vol. 4, p. 757, 1968.Google Scholar
9. Hildebrand, F. B. Introduction to numerical analysis. McGraw-Hill, 1956.Google Scholar
10. Bisshopp, K. E. and Drucker, D. C. Large deflection of cantilever beams. Quarterly of Applied Mathematics, Vol. 3, p. 272, 1945.CrossRefGoogle Scholar