Effect of Yielding on the Fatigue Properties of Test Pieces Containing Stress Concentrations

K. Gunn

doi:10.1017/S0001925900010052

Summary

A method of estimating the fatigue properties of notched test pieces when cyclic loads are applied in the presence of mean stresses is described. The method takes into account the local yielding which occurs near the base of the notch when the nominal stresses are sufficiently high. The general form of the predicted R/M diagrams closely resembles those obtained experimentally in previously published work.

References

1. Hardrath, and Ohman, . A Study of Elastic and Plastic Stress Concentration Factors due to Notches and Fillets in Flat Plates. N.A.C.A. Report 1117.Google Scholar

2. Lazan, and Blatherwick, . Strength Properties of Rolled Aluminium Alloys under Various Combinations of Alternating and Mean Axial Fatigue Stresses. A.S.T.M. Preprint No. 74, 1953.Google Scholar

3. Wållgren, . Direct Fatigue Tests with Tensile and Compressive Mean Stresses on 24ST Aluminium Plain Specimens and Specimens Notched by a Drilled Hole. Flygtekniska Försöksanstalten FFA Meddelande Nr. 48, 1953.Google Scholar

4. Peterson, . Methods of Correlating Data from Fatigue Tests of Stress Concentration Specimens. Stephen Timoshenko, 60th Anniversary Volume. Macmillan, 1938.Google Scholar

Crossref Citations

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

1961. Fatigue Testing and Analysis of Results. p. 250.

1962. Fatigue of Metals. p. 383.

Welbourne, E. R. 1963. Comment on the Effect of Proof Stress on Notched Fatigue Strength. The Journal of the Royal Aeronautical Society, Vol. 67, Issue. 636, p. 798.

Bell, W. J. and Benham, P. P. 1963. Symposium on Fatigue Tests of Aircraft Structures: Low-Cycle, Full-Scale, and Helicopters. p. 25.

Forrest, P. G. 1963. A Note on the Effect of Proof Stress on the Notched Fatigue Strength of the Aluminium Alloy HE 15. The Journal of the Royal Aeronautical Society, Vol. 67, Issue. 633, p. 596.

Altenpohl, D. and von Burg, E. 1965. Aluminium und Aluminiumlegierungen. Vol. 19, Issue. , p. 547.

Schijve, J. 1967. Fatigue Crack Propagation. p. 415.

Russell, J. E. 1969. Paper 27. Strength of Transmission Shafting. Proceedings of the Institution of Mechanical Engineers, Conference Proceedings, Vol. 184, Issue. 9, p. 477.

Passey, R.D.C. 1976. Reliability of compressor aerofoils. Progress in Aerospace Sciences, Vol. 17, Issue. , p. 67.

Jerram, K 1976. Prediction of endurance of fillet welds subjected to narrow band random loading. The Journal of Strain Analysis for Engineering Design, Vol. 11, Issue. 2, p. 78.

Burguete, R L and Patterson, E A 1995. The Effect of Mean Stress on the Fatigue Limit of High Tensile Bolts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 209, Issue. 4, p. 257.

Golub, V. P. and Krizhanovskii, V. I. 1997. An approach to analysis of fatigue strength under conditions of stress concentration in the process of high-cycle asymmetric loading. Strength of Materials, Vol. 29, Issue. 6, p. 590.

Stephens, R. I. Bradley, N. J. Horn, N. J. Gradman, J. J. Arkema, J. M. and Borgwardt, C. S. 2005. Fatigue of High Strength Bolts Rolled Before or After Heat Treatment with Five Different Preload Levels. Vol. 1, Issue. ,

Nicholas, Theodore 2006. High Cycle Fatigue. p. 27.

Stephens, RI Bradley, NJ Horn, NJ Arkema, JM and Gradman, JJ 2006. Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Coarse Thread Bolts for Multiple Preload Conditions. Journal of ASTM International, Vol. 3, Issue. 3, p. 1.

Nicholas, Theodore 2006. High Cycle Fatigue. p. 213.

Pogrebnyak, A. D. Regul’skii, M. N. and Zheldubovskii, A. V. 2013. Assessment of the effect of stress concentration on the fatigue resistance of structural materials under asymmetrical loading. Strength of Materials, Vol. 45, Issue. 1, p. 82.

Griza, Sandro da Silva, Marcio EG dos Santos, Silvando V and Strohaecker, Telmo R 2016. Experimental evaluation of cyclic stresses on axially loaded bolted joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 230, Issue. 15, p. 2611.

Noda, Nao-Aki Wang, Biao Oda, Kazuhiro Sano, Yoshikazu Liu, Xi Inui, Yuto and Yakushiji, Terutoshi 2021. Effects of root radius and pitch difference on fatigue strength and anti-loosening performance for high strength bolt–nut connections. Advances in Structural Engineering, Vol. 24, Issue. 9, p. 1941.

Wang, Biao Noda, Nao-Aki Liu, Xi Sano, Yoshikazu Inui, Yuto and Oda, Kazuhiro 2021. How to improve both anti-loosening performance and fatigue strength of bolt nut connections economically. Engineering Failure Analysis, Vol. 130, Issue. , p. 105762.

Article contents

Effect of Yielding on the Fatigue Properties of Test Pieces Containing Stress Concentrations

Summary

Access options

References

This article has been cited by the following publications. This list is generated based on data provided by Crossref.

Article contents

Effect of Yielding on the Fatigue Properties of Test Pieces Containing Stress Concentrations

Summary

Access options

References

Save article to Kindle

Save article to Dropbox

Save article to Google Drive

Reply to: Submit a response

Your details

You have entered the maximum number of contributors

Conflicting interests