Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-25T04:25:38.706Z Has data issue: false hasContentIssue false
  • English
  • Français

The Design of Intermediate Vertical Stiffeners on Web Plates Subjected to Shear

Published online by Cambridge University Press:  07 June 2016

K. C. Rockey
K. C. Rockey*
Affiliation:
Engineering Department, University College of Swansea
Get access

Summary

The correct design of intermediate vertical stiffeners on web plates subjected to shear becomes very important when the web plates are designed to operate at loads close to their buckling loads. This paper presents details of an extensive series of tests conducted on stiffened web plates subjected to shear. From the analysis of the results obtained from these tests, new empirical relationships between the flexural rigidity and spacing of the intermediate stiffeners and the buckling stress of the stiffened web plate have been obtained.

One interesting and important feature of these new relationships is that they define more clearly than hitherto the difference in the behaviour of single-and double-sided stiffeners.

Type
Research Article
Information
Aeronautical Quarterly , Volume 7 , Issue 4 , November 1956 , pp. 275 - 296
Copyright
Copyright © Royal Aeronautical Society. 1956

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Timoshenko, S. Theory of Elastic Stability. McGraw-Hill, New York, 1936.Google Scholar
2. Stein, M. and Neff, J. Buckling Stress of Simply Supported Rectangular Flat Plates in Shear. N.A.C.A.. T.N. 1222, 1947.Google Scholar
3. Budiansky, B. and Connor, R. W. Buckling Stresses of Clamped Rectangular Flat Plates in Shear. N.A.C.A. T.N. 1559, 1948.Google Scholar
4. Schmieden, C. The Buckling of Stiffened Plates in Shear. Translation No. 31, U.S. Experimental Model Basin, Washington Navy Yard, June 1936.Google Scholar
5. Seydel, E. Wrinkling of Reinforced Plates subjected to Shear Stresses. N.A.C.A. T.M. 602, 1931.Google Scholar
6. Wang, T. K. Buckling of Transverse Stiffened Plates under Shear. Journal of Applied Mechanics, Vol. 14, No. 4, December 1947.Google Scholar
7. Seydel, E. The Critical Shear Load of Rectangular Plates. N.A.C.A. T.M. 705, 1933.Google Scholar
8. Melcon, M. A. and Ensrud, A. F. Analysis of Stiffened Curved Panels under Shear and Compression. Journal of the Aeronautical Sciences, Vol. 20, p. 111, February 1953.Google Scholar
9. Way, S. Stability of Rectangular Plates under Shear and Bending Forces. Journal of Applied Mechanics, Vol. 3, No. 4, December 1936.Google Scholar
10. Stein, M. and Fralich, R. W. Critical Shear Stress of Infinitely Long, Simply Supported Plate with Transverse Stiffeners. N.A.C.A. T.N. 1851, 1949.Google Scholar
11. Moore, R. L. An Investigation on the Effectiveness of Stiffeners on Shear Resistant Plate Girder Webs. N.A.C.A. T.N. 862, September 1942.Google Scholar
12. Scott, M. and Weber, R. L. Requirements for Auxiliary Stiffeners attached to Panels under Combined Compression and Shear. N.A.C.A. T.N. 921, 1943.Google Scholar
13. Sparkes, S. R. The Behaviour of the Webs of Plate Girders. Welding Research, Vol. 10, No. 6, 1947.Google Scholar
14. British Standard 1470. Wrought Aluminium and Aluminium Alloys. British Standards Institution, 1948.Google Scholar
15. Kuhn, P., Peterson, J. P. and Levin, L. R. A Summary of Diagonal Tension. Parts I and II. N.A.C.A. T.N. 2661 and 2662, May 1952.Google Scholar
16. Kuhn, P. and Levin, L. R. An Empirical Formula for the Critical Shear Stress of Curved Plates. N.A.C.A. A.R.R. L5.A05, 1945.Google Scholar
17. Bleich, F. Buckling Strength of Metal Structures. McGraw-Hill, New York, 1952.Google Scholar
18. Royal Aeronautical Society Data Sheet 02.03.14. Minimum Stiffness Criterion for Stiffeners in a Shear Panel, May 1945.Google Scholar
19. German Standard Stabilitätsfalle (Knickung, Kippung, Beulung). DIN 4114, Blatt 2, July 1952.Google Scholar
20. Specifications for the Design and Fabrication of Structures of Alcoa Aluminum Alloy 61S-T6. Aluminum Company of America, April 1948.Google Scholar
21. Specifications for Heavy Duty Structures of High Strength Aluminum Alloy. Proceedings of the American Society of Civil Engineers, Vol. 76, No. 22, June 1950.Google Scholar
22. Kuhn, Paul and Peterson, J. P. Strength Analysis of Stiffened Beam Webs. N.A.C.A. T.M. 1364, 1947.Google Scholar
23. Kuhn, P. and Chiarito, P.T. The Strength of Plane Web Systems in Incomplete Diagonal Tension. N.A.C.A. A.R.R. WR L-367, August 1942.Google Scholar
24. Levin, L. R. and Sandlin, C. W. Strength Analysis of Stiffened Thick Beam Webs. N.A.C.A. T.N. 1820, 1949.Google Scholar
25. Levin, L. R. Ultimate Stresses developed by 24S-T and 75S-T Aluminum Alloy Sheet in Incomplete Diagonal Tension. N.A.C.A. T.N. 1756, 1948.Google Scholar