Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-12-01T08:55:29.140Z Has data issue: false hasContentIssue false
  • English
  • Français

Cumulative Damage in Fretting Fatigue of Pinned Joints Subjected to Narrow Band Random Loading

Published online by Cambridge University Press:  07 June 2016

D. J. White  and
J. Lewszuk
D. J. White
Affiliation:
GEC Power Engineering Limited, Whetstone
J. Lewszuk
Affiliation:
GEC Power Engineering Limited, Whetstone
Get access

Summary

Fatigue tests have been made in constant amplitude loading and in narrow band random loading on FV520B steel lugs of width 27 mm loaded by means of a pin 12·7 mm in diameter. The test frequency was 220 Hz, a mean tensile stress of 309 N/mm2 was used and tests extended for endurances of up to 109 cycles.

For endurances up to 106 cycles there was good agreement between constant amplitude and random loading results with both stresses expressed in root mean square values. Beyond this endurance, the random loading results lay below those obtained in constant amplitude loading. Predictions made using the Palmgren-Miner cumulative damage hypothesis in conjunction with the endurance curve in constant amplitude loading gave good agreement with the results in random loading over the whole range of endurances tested.

Type
Research Article
Information
Aeronautical Quarterly , Volume 21 , Issue 4 , November 1970 , pp. 400 - 408
Copyright
Copyright © Royal Aeronautical Society. 1970

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. White, D. J. Fatigue strength of small pinned connections made from alloy steel FV520B. Proceedings, Institution of Mechanical Engineers, Vol. 182 (Part 1), p. 615, 1967-8.Google Scholar
2. White, D. J. Fatigue strength of large single-pinned and double-pinned connections made from alloy steel FV520B. Proceedings, Institution of Mechanical Engineers, Vol. 183 (Part 1), p. 563, 1968-9.Google Scholar
3. White, D. J. Effect of pins with flats and resin-bonded polytetrafluoroethylene coatings on the fatigue strength of large pinned connections made from alloy steel FV520B. Proceedings, Institution of Mechanical Engineers, to be published (1970-71).Google Scholar
4. Rizk, W. and Seymour, D. F. Investigations into the failure of gas circulators and circuit components at Hinkley Point nuclear power station. Proceedings, Institution of Mechanical Engineers, Vol. 179 (Part 1), p. 627, 1965.CrossRefGoogle Scholar
5. Palmgren, A. The fatigue life of ball bearings (in German). Zeitschrift, Verein deutscher Ingenieure, Vol. 68 (No. 14), p. 339, 1924.Google Scholar
6. Miner, M. A. Cumulative damage in fatigue. Journal of Applied Mechanics, Vol. 12 (No. 3), A159, 1945.Google Scholar
7. Kirkby, W. T. and Edwards, P. R. A method of fatigue life prediction using data obtained under random loading conditions. Royal Aircraft Establishment Technical Report 66023, 1966.Google Scholar
8. White, D. J. and Lewszuk, J. Narrow band random fatigue testing with Amsler vibrophore machines. Journal of Mechanical Engineering Science, Vol. 11, No. 6, p. 598, December 1969.Google Scholar
9. Rice, S. O. Mathematical analysis of random noise. Bell Systems Technology Journal, Vol. 23, p. 282, 1944; Vol. 24, p. 46, 1945. Reprinted in N. Wax, Selected papers on noise and stochastic processes. Dover, New York 1954.Google Scholar
10. White, D. J. Effect of truncation of peaks in fatigue testing using narrow band random loading. International Journal of Mechanical Science, Vol. 11, p. 667, 1969.Google Scholar
11. The analysis of normally distributed data. Royal Aeronautical Society, Engineering Sciences Data Item 68014, 1968.Google Scholar
12. A tentative guide for fatigue testing and the statistical analysis of fatigue data. ASTM Special Technical Publication, 91A, 1958.Google Scholar
13. Jessop, H. T., Snell, C. and Holister, G. S. Photoelastic investigation on plates with single interference-fit pins with load applied (a) to pin only, and (b) to pin and plate simultaneously. Aeronautical Quarterly, Vol. IV, p. 230, 1955.Google Scholar