Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-22T16:04:49.023Z Has data issue: false hasContentIssue false
  • English
  • Français

Rotary Inertia and Shear in Beam Vibration Treated by the Ritz Method

Published online by Cambridge University Press:  04 July 2016

B. Dawson
B. Dawson*
Affiliation:
University of Surrey
Get access Rights & Permissions [Opens in a new window]

Summary

The natural frequencies of vibration of a cantilever beam allowing for rotary inertia and shear deformation are obtained by the approximate Ritz method.

The workability of the method is dependent upon the approximating functions chosen for the dynamic displacement curves. A series of characteristic functions representing the normal modes of vibration of cantilever beams in simple flexure is used as the approximating functions for both deflections due to flexure and shear deformation. Good agreement is shown between frequencies obtained by the Ritz method and those resulting from an analytical solution.

The effect upon the natural frequencies of allowing for rotary inertia alone is shown and it is seen to increase rapidly with mode number.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 72 , Issue 688 , April 1968 , pp. 341 - 344
Copyright
Copyright © Royal Aeronautical Society 1968 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Rayleigh, Lord. Theory of Sound. Macmillan & Co, London, 1877.Google Scholar
2. Timoshenko, S. P. On the Correction for Shear of the Differential Equation for Transverse Vibration of Pris matic Bars. Philosophical Mag, Vol 41, Series 6, p 744, London, 1921.Google Scholar
3. Timoshenko, S. P. On the Transverse Vibrations of Bars ot Uniform Cross-Section. Philosophical Mag, Vol 43, Series 6, p 125, London, 1922.Google Scholar
4. Dengler, M. A. and Goland, M. Transverse Impact of Long Beams Including Rotary Inertia and Shear Effects. Proceedings 1st USA National Congress Applied Mechanics, 1951. (ASME NY, 1952), p 179.Google Scholar
5. Miklowitz, M. J. Flexural Wave Solutions of Coupled Equations Representing the More Exact Theory of Bending. J Appl Mech, Trans ASME, pp 511–514, Vol 75, 1953.Google Scholar
6. Sutherland, J. G. and Goodman, L. E. Vibrations of Prismatic Bars Including Rotary Inertia and Shear Cor rections. Department of Civil Engineering, University of Illinois, Urbana, Illinois, 5th April 1951.Google Scholar
7. Anderson, R. A. Flexural Vibrations in Uniform Beams According to the Timoshenko Theory. J of Applied Mechs, Trans ASME, p 504, 1953.Google Scholar
8. Dolph, C. L. On the Timoshenko Theory of Transverse Beam Vibrations. Quarterly Journal of Applied Mathematics, Vol 12, No 2, p 175, 1954.Google Scholar
9. Huang, T. C. Effect of Rotary Inertia and Shear on the Vibration of Beams Treated by the Approximate Methods of Ritz and Galerkin. Proceedings of the Third US National Congress of Applied Mechanics, pp 189–194, ASME, 1958.Google Scholar
10. Huang, T. C. The Effect of Rotary Inertia and of Shear Deformation on the Frequency and Normal Mode Equations of Uniform Beams With Simple End Conditions. J Applied Mechanics, Trans ASME, December 1961.Google Scholar
11. Hurty, W. C. and Rubenstein, M. F. Rotary Inertia and Shear in Beam Vibration. Journal of The Franklin Institute, Vol 278, No 2, August 1964.Google Scholar
12. Jacobson, L. S. Natural Periods of Uniform Cantilever Beams. Trans ASC Engs, Vol 65, 1939.Google Scholar
13. Kruszewski, E. T. Effect of Transverse Shear and Rotary Inertia on the Natural Frequency of a Uniform Beam. NACA Tech Note No 1909, 1949.Google Scholar
14. Traill–Nash, R. W. and Collar, A. R. The Effects of Shear Flexibility and Rotary Inertia of the Bending Vibrations of Beams. Quart Journal Mech and Applied Maths, Vol 6, Part 2, p 186, 1953.Google Scholar
15. Carnegie, W. A Note on the Use of the Variational Method to Derive the Equation of motion of a Vibrating Beam of Uniform Cross-Section Taking Account of Shear Deflection and Rotary Inertia. Bull of Mech Eng Educ, Vol 2, No 1, pp 35–40, June 1963.Google Scholar
16. Young, D. and Felgar, R. P. Tables of Characteristic Functions Representing Normal Modes of Vibration of a Beam. University of Texas. No 4913, 1949.Google Scholar
17. Huang, T. C. and King, C. S. New Tables of Eigen-functions Representing Normal Modes of Vibration of Timenshenko Beams. Development in Theoretical and Applied Mechanics. Vol I. Plenum Press, New York, 1963.Google Scholar