Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-27T15:48:59.563Z Has data issue: false hasContentIssue false
  • English
  • Français

Impacts of low-pressure (LP) compressor’s deterioration upon an aero-engine’s high-pressure (HP) turbine blade’s life consumption

Published online by Cambridge University Press:  03 February 2016

M. Naeem
M. Naeem*
Affiliation:
College of Aeronautical Engineering (CAE), National University of Sciences & Technology (NUST), Pakistan
Get access Rights & Permissions [Opens in a new window]

Abstract

Some in-service deterioration in any mechanical device, such as an aero-engine, is inevitable. As a result of experiencing a deterioration of efficiency and/or mass flow, an aero-engine will automatically adjust to a different set of operating characteristics; thereby frequently resulting in changes of rpm and/or turbine entry temperature in order to provide the same thrust. Rises in the turbine entry-temperatures and the high-pressure turbine’s rotational speed result in greater rates of creep and fatigue damage being incurred by the hot-end components and thereby higher engine’s life cycle costs. Possessing a better knowledge of the effects of engine deterioration upon the aircraft’s performance, as well as fuel and life usages, helps the users to take wiser management decisions and hence achieve improved engine utilisation. For a military aircraft, using a computer performance simulation, the consequences of low-pressure (LP) compressor’s deterioration upon an aero-engine high-pressure (HP) turbine blade’s life-consumption have been predicted.

Type
Research Article
Information
The Aeronautical Journal , Volume 110 , Issue 1106 , April 2006 , pp. 227 - 238
Copyright
Copyright © Royal Aeronautical Society 2006 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Devereux, B. and Singh, R., Use of computer simulation techniques to assess thrust rating as a means of reducing turbo-jet life cycle costs, International Gas-Turbine and Aero Engine Congress and Exposition, 13-16 June 1994, The Hague, The Netherlands.Google Scholar
2. Naeem, M., Implications of Aero-Engine Deterioration for a Military Aircraft’s Performance, PhD Thesis, 1999, Cranfield University, UK.Google Scholar
3. Stevenson, J.D. and Saravanamuttoo, H.I.H., Effects of cycle choice and deterioration on thrust indicators for civil engines, ISABE 95-7077, 10-15 Sep 1995, Twelfth International Symposium on Air-Breathing Engines, Melbourne, Australia.Google Scholar
4. Sallee, G.P., Performance deterioration based on existing (historical) data, NASA-CR-135448, May 1980.Google Scholar
5. Sallee, G.P., Kruckenberg, H.D. and Toomy, E.H., Analysis of turbofan-engine performance deterioration and proposed follow-on test’, Oct 1986, NASA-CR-134769.Google Scholar
6. Naeem, M., Singh, R. and Probert, D., Impacts of aero-engine deterioration on military aircraft mission’s effectiveness, Aeronaut J, December 2001, 105, (1054), pp 685–695.Google Scholar
7. Naeem, M., Singh, R. and Probert, D., Implications of engine deterioration upon an aero-engine HP turbine blade’s thermal fatigue-life, Int J Fatigue, 2000, 22, pp 147–160.Google Scholar
8. Diakunchak, I.S., Performance deterioration in industrial gas-turbines’, J Engineering for Gas Turbines and Power, 1992, 114, pp 161–168.Google Scholar
9. Acker, G.F. and Saravanamuttoo, H.I.H., Predicting a gas-turbine’s performance-degradation due to compressor fouling using computer simulation techniques, ASME 88-GT-206, Aug 1987.Google Scholar
10. Saravanamuttoo, H.I.H. and Lakshminarasimha, A.N., A preliminary assessment of compressor fouling, ASME 85-GT-153, March 1985.Google Scholar
11. Lakshminarasimha, A.N., Boyce, M.P. and Meher-Homji, C.B., Modelling and analysis of gas-turbine performance deterioration, J Engineering for Gas Turbines and Power, 1994, 116, pp 46–52.Google Scholar
12. Haub, G.L. and Hauhe, W.E., Field evaluation of on-line compressor cleaning in heavy-duty industrial gas-turbines, ASME Paper No 90-GT-107, 1990.Google Scholar
13. Penny, R.K. and Weber, M.A., Integrity assessment of components in the creep range, Jan 1990, ASME paper 90-GT-125.Google Scholar
14. Wu, F.E., Aero-Engine’s Life Evaluated for Combined Creep and Fatigue, and Extended by Trading-off Excess Thrust, PhD Thesis, Cranfield University, UK, 1994.Google Scholar
15. Naeem, M., Singh, R. and Probert, D., Implications of engine deterioration for creep-life, 1998, Applied Energy, 60, (4), pp 185–225.Google Scholar
16. May, Jnr R.J., Chaffee, D.R., Stumbo, P.B. and Reitz, M.D., Tactical aircraft engine usage – a statistical study, American Institute of Aeronautics and Astronautics, Aug 1981, Report No AIAA-81-1652.Google Scholar
17. Matsuishi, M. and Endo, T., Fatigue of metals subjected to varying stress, paper presented to Japan Society of Mechanical Engineers Conference, March 1968, Fukuoka, Japan.Google Scholar
18. Dowling, N.E., Fatigue failure predictions for complicated stress-strain histories, J Materials, March 1972, ASTM, 7, (1), pp 71–87.Google Scholar
19. Downing, S.D. and Socie, D.F., Simple rainflow counting algorithms, Int J Fatigue, January 1982, 4, (1), pp 31–40.Google Scholar
20. Rychlik, I., A new definition of the rainflow cycle counting method, Int J Fatigue, April 1987, 9, (2), pp 119–121.Google Scholar
21. ESDU. Fatigue-life estimation under variable-amplitude loading using cumulative damage calculations, Fatigue-endurance data contents, September 1995, 2, Guide card No 95006, ESDU International, 27 Corsham Street, London, UK.Google Scholar
22. Raske, D.T. and Morrow, J., Mechanics of materials in low cycle fatigue testing, ASTM STP 465, American Society for Testing and Materials, 1969, pp 1–26.Google Scholar
23. Basquin, O.H., The exponential law of endurance tests, Proceedings of the American Society of Testing of Materials, 1910, 10, pp 625–630.Google Scholar
24. Manson, S.S., Behaviour of materials under conditions of thermal stress, NACA TN 2933, 1953.Google Scholar
25. Coffin, L.F., A study of the effects of cyclic thermal stresses on a ductile metal, Transactions of the ASME (Series A), 1954, 76, pp 931–950.Google Scholar
26. James, A.G., Fatigue-design handbook: a guide for product design and development engineers, SAE, Advances in Engineering, 1968, 4.Google Scholar