Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-22T11:37:13.975Z Has data issue: false hasContentIssue false
  • English
  • Français

The flow past two cylinders having different diameters

Published online by Cambridge University Press:  04 July 2016

A. J. Baxendale ,
I. Grant  and
F. H. Barnes
A. J. Baxendale
Affiliation:
Department of Offshore EngineeringHeriot-Watt UniversityEdinburgh
I. Grant
Affiliation:
Department of Offshore EngineeringHeriot-Watt UniversityEdinburgh
F. H. Barnes
Affiliation:
Department of PhysicsUniversity of Edinburgh
Get access Rights & Permissions [Opens in a new window]

Summary

This paper describes the results of an investigation of the flow over two cylinders in which the diameter of the upstream cylinder is half that of the downstream cylinder. Measurements were made of the surface pressure distribution around the downstream cylinder, and of the base pressures and Strouhal numbers of the two cylinders for separations between 1·32 D and 3·88 D, where D is the diameter of the downstream cylinder, and for angles of stagger between 0° and 45°.

With the cylinders in tandem two different flows were found, and it is suggested that there is a step change between the flows at a critical separation.

The behaviour of the measured quantities with a change of the angle of stagger is found, in general, to depend on whether the separation is less or greater than the critical separation. For each separation an angle of stagger is found at which the pressure distribution has a strong asymmetry over the rear of die cylinder. These pressure distributions are similar to each other, and they indicate the presence of an enhanced flow over the upper half of the cylinder. Also the lift force, for a given separation, then has its maximum value.

It is found that for separations greater than the critical separation the Strouhal numbers of the vortex shedding from the two cylinders are identical over a considerable range in the angle of stagger.

Type
Research Article
Information
The Aeronautical Journal , Volume 89 , Issue 884 , April 1985 , pp. 125 - 134
Copyright
Copyright © Royal Aeronautical Society 1985 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.ESDU. Cylinder groups: mean forces on pairs of long circular cylinders. Data Item No. 84015, ESDU International Ltd, London, 1984.Google Scholar
2. Hatfield, H. M. and Morkovin, M. V. Effect of an oscillating free stream on the unsteady pressure distribution on a circular cylinder. Journal of Fluids Engineering, 1973, 95, 249.Google Scholar
3. Hiwada, M., Taguchi, T., Mabuchi, I. and Kumada, M. Fluid flow and heat transfer around two circular cylinders of different diameters in cross flow. Bulletin of the JSME, 1979, 22, 715.Google Scholar
4. Ishigai, S., Nishikawa, E., Nishimura, K. and Cho, K. Experimental study on structure of gas flow in tube banks with tube axes normal to flow. Bulletin of the JSME, 1972, 15, 949.Google Scholar
5. Kiya, M., Arie, M., Tamura, H. and Mori, H. Vortex shedding from two circular cylinders in staggered arrangement. Journal of Fluids Engineering, 1980, 102, 166.Google Scholar
6. Novak, J. Strouhal number of two cylinders of different diameter arranged in tandem. Acta Technica CSAV, 1975, 3, 366.Google Scholar
7. Price, S. J. The origin and nature of the lift force on the leeward. of two bluff bodies. Aeronautical Quarterly, 1976, XXVI, 154.Google Scholar
8. Roshko, A. Experiments on the flow past a circular cylinder at very high Reynolds number. Journal of Fluid Mechanics, 1961. 10, 345.Google Scholar
9. Zdravkovich, M. M. Review of flow interference between two circular cylinders in various arrangements. Journal of Fluids Engineering, 1977, 99, 618.Google Scholar
10. Zdravkovich, M. M. and Stanhope, D. J. Flow pattern in the gap between two cylinders in tandem. University of Salford Internal Report, FM 5/72, 1972.Google Scholar