Hostname: page-component-848d4c4894-8kt4b Total loading time: 0 Render date: 2024-06-30T20:43:10.243Z Has data issue: false hasContentIssue false
  • English
  • Français

Experimental investigation of rotating instability in a contra-rotating axial flow compressor

Published online by Cambridge University Press:  22 January 2021

S. Yue Open the ORCID record for S. Yue [Opens in a new window] ,
Y. Wang ,
Z. Zhang ,
L. Wei  and
H. Wang
S. Yue
Affiliation:
Northwestern Polytechnical University, Xi’an, Shaanxi710129, China
Y. Wang*
Affiliation:
Northwestern Polytechnical University, Xi’an, Shaanxi710129, China
Z. Zhang
Affiliation:
Northwestern Polytechnical University, Xi’an, Shaanxi710129, China
L. Wei
Affiliation:
Northwestern Polytechnical University, Xi’an, Shaanxi710129, China
H. Wang
Affiliation:
Northwestern Polytechnical University, Xi’an, Shaanxi710129, China
*
[email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The rotating instability in a contra-rotating axial flow compressor is investigated by experiments. Twenty-four pressure sensors were installed on the casing to capture the unsteady flow in the rotor tip region simultaneously. A double-phase-locking technique suitable for the contra-rotating compressor was proposed to characterise the static pressure contours of the rotor tip. The mean and root-mean-square pressure contours indicate that rotating instability occurs before the rotating stall happened, and the rotor tip clearance vortex is located upstream of the rear rotor leading edge plane before stall. Fourier spectrum shows that rotating instability and rotating stall both happened under the stall condition, and the frequency band of rotating instability does not change with the flow rate. In the front rotor, the frequency of rotating instability is half of the blade passing frequency. It is verified that the modal estimation method can be implemented by using the average azimuthal phase velocity, which significantly reduced the number of pressure sensors required. Modal estimation results show that each peak of the rotating instability frequency band corresponds to a unique dominant circumferential mode. By optimising average azimuthal phase velocity, an improved modal estimation method is obtained, which can further improve the reliability of the modal estimation results.

Keywords

rotating instabilitycontra-rotatingcompressormodal estimation
Type
Research Article
Information
The Aeronautical Journal , Volume 125 , Issue 1286 , April 2021 , pp. 742 - 762
Copyright
© The Author(s), 2021. Published by Cambridge University Press on behalf of Royal Aeronautical Society

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Day, I.J. Stall, surge, and 75 years of research, J. Turbomach., 2016, 138, (1), pp 011001. doi: 10.1115/gt2015-44109CrossRefGoogle Scholar
Chen, J.P., Johnson, B., Hathaway, M. and Webster, R. Flow Characteristics of Tip-Injection on Compressor Rotating Instability via Time-Accurate Simulation, In 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, 2010, pp 1604. doi: 10.2514/6.2010-1604CrossRefGoogle Scholar
Haukap, C. Zur Korrelation von Schaufelschwingungen und rotierenden Strömungsphônomenen in Axialverdichtern, Ph.D. Dissertation, Universität München, 2006.Google Scholar
Holzinger, F., Wartzek, F., Schiffer, H.P., Leichtfuss, S. and Nestle, M. Self-excited blade vibration experimentally investigated in transonic compressors: acoustic resonance, J. Turbomach., 2016, 138, (4), pp 041001. doi: 10.1115/gt2015-43618CrossRefGoogle Scholar
Mathioudakis, K. and Breugelmans, F.A.E. Development of small rotating stall in a single stage axial compressor, In ASME 1985 International Gas Turbine Conference and Exhibit. American Society of Mechanical Engineers, 1985, pp V001T03A064-V001T03A064. doi: 10.1115/85-gt-227CrossRefGoogle Scholar
Inoue, M., Kuroumaru, M., Iwamoto, T. and Ando, Y. Detection of a rotating stall precursor in isolated axial flow compressor rotors, J. Turbomach., 1991, 113, (2), pp 281–287. doi: 10.1115/1.2929102CrossRefGoogle Scholar
Beselt, C., Rennings, R., Thiele, F. and Peitsch, D. Experimental and numerical investigations of rotating instability phenomenon in an axial compressor stator, In 42nd AIAA fluid dynamics conference and exhibit, 2012, pp 2980. doi: 10.2514/6.2012-2980CrossRefGoogle Scholar
Liu, J.M., Holste, F. and Neise, W. On the azimuthal mode structure of rotating blade flow instabilities in axial turbomachines, In Aeroacoustics Conference, AIAA, 1996, 96, (1741), doi: 10.2514/6.1996-1741CrossRefGoogle Scholar
Fukano, T., Takamatsu, Y. and Kodama, Y. The effects of tip clearance on the noise of low pressure axial and mixed flow fans, J. Sound Vib., 1986, 105, (2), pp 291–308. doi: 10.1016/0022-460x(86)90158-6CrossRefGoogle Scholar
Neuhaus, L. and Neise, W. Active flow control to reduce the tip clearance noise and improve the aerodynamic performance of axial turbomachines, Proceedings Fan Noise, 2003.CrossRefGoogle Scholar
Raitor, T. and Neise, W. Sound generation in centrifugal compressors, J. Sound Vib., 2008, 314, (3), pp 738–756. doi: 10.1016/j.jsv.2008.01.034CrossRefGoogle Scholar
Holste, F. and Neise, W. Acoustical near field measurements on a propfan model for noise source identification, In CEAS/AIAA Joint Aeroacoustics Conference, 1st, Munich, Germany, 1995, pp 1221–1229.Google Scholar
Inoue, M., Kuroumaru, M., Yoshida, S., Minami, T., Yamada, K. and Furukawa, M. Effect of tip clearance on stall evolution process in a low-speed axial compressor stage, In ASME Turbo Expo 2004: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2004, pp 385–394. doi: 10.1115/gt2004-53354CrossRefGoogle Scholar
Zhang, L.Y., He, L. and Ster, H. A numerical investigation of rotating instability in steam turbine last stage, J. Turbomach., 2013, 135, (1), pp 011009. doi: 10.1115/1.4006330CrossRefGoogle Scholar
Kameier, F. and Neise, W. Experimental study of tip clearance losses and noise in axial turbomachines and their reduction, J. Turbomach., 1997, 119, (3), pp 460–471. doi: 10.1115/1.2841145CrossRefGoogle Scholar
Kameier, F. and Neise, W. Rotating blade flow instability as a source of noise in axial turbomachines, J. Sound Vib., 1997, 203, (5), pp 833–853. doi: 10.1006/jsvi.1997.0902CrossRefGoogle Scholar
Inoue, M., Kuroumaru, M., Tanino, T., Yoshida, S. and Furukawa, M. Comparative studies on short and long length-scale stall cell propagating in an axial compressor rotor, J. Turbomach., 2001, 123, (1), pp 24–30. doi: 10.1115/2000-gt-0425CrossRefGoogle Scholar
Mailach, R., Lehmann, I. and Vogeler, K. Rotating instabilities in an axial compressor originating from the fluctuating blade tip vortex, J. Turbomach., 2001, 123, (3), pp 453–460. doi: 10.1115/1.1370160CrossRefGoogle Scholar
Marz, J., Hah, C. and Neise, W. An experimental and numerical investigation into the mechanisms of rotating instability, J. Turbomach., 2002, 124, (3), pp 367–374. doi: 10.1115/1.1460915CrossRefGoogle Scholar
Pardowitz, B., Tapken, U. and Enghardt, L. Time-resolved rotating instability waves in an annular cascade, In 18th AIAA/CEAS Aeroacoustics Conference, AIAA, Colorado Springs, CO, 2012, pp 4-6. doi: 10.2514/6.2012-2132CrossRefGoogle Scholar
Dazin, A., Cavazzini, G., Pavesi, G., Dupont, P., Coudert, S., Ardizzon, G., Caignaert, G. and Bois, G. High-speed stereoscopic PIV study of rotating instabilities in a radial vaneless diffuser, Exp. Fluids, 2011, 51, (1), pp 83–93. doi: 10.1007/s00348-010-1030-xCrossRefGoogle Scholar
Pardowitz, B., Tapken, U., Sorge, R., Thamsen, P.U. and Enghardt, L. Rotating instability in an annular cascade: detailed analysis of the instationary flow phenomena, J. Turbomach., 2014, 136, (6), pp 061017. doi: 10.1115/1.4025734CrossRefGoogle Scholar
Pardowitz, B., Tapken, U., Neuhaus, L. and Enghardt, L. Experiments on an axial fan stage: time-resolved analysis of rotating instability modes, J. Eng. Gas Turb. Power, 2015, 137, (6), pp 062505. doi: 10.1115/1.4028686CrossRefGoogle Scholar
Pardowitz, B., Peter, J., Tapken, U., Thamsen, P.U. and Enghardt, L. Visualization of secondary flow structures caused by rotating instability: synchronized stereo high-speed PIV and unsteady pressure measurements, In 45th AIAA Fluid Dynamics Conference, 2015, pp 2930. doi: 10.2514/6.2015-2930CrossRefGoogle Scholar
Mcdougall, N.M., Cumpsty, N.A. and Hynes, T.P. Stall inception in axial compressors, J. Turbomach., 1990, 112, (1), pp 116–123. doi: 10.1115/89-gt-63CrossRefGoogle Scholar