Published online by Cambridge University Press: 04 July 2016
An experimental study was conducted to analyse the pressure distribution along the floor of a cavity, with and without the presence of an upstream tandem cavity, at a constant freestream Mach number of about 0-911. Measurements were made for single cavities and the results compared with those obtained in the presence of an upstream tandem cavity. This comparison was made over a wide range of geometries, covering open to closed classes of cavities with both identical and different dimensions for the two cavities. The effect of the spacing between the two cavities was also studied. The downstream cavity is shown to be significantly affected by the presence of an upstream cavity, with both the overall net static pressure and its gradient being affected, dependent upon the class of cavity geometry and spacing under consideration.