Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-22T10:28:17.178Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of a special reinforcement on the elastic properties of micro- and nanocomposites with polymer matrix

Published online by Cambridge University Press:  27 January 2016

I. A. Guz ,
J. J. Rushchitsky  and
A. N. Guz
I. A. Guz*
Affiliation:
Centre for Micro- and Nanomechanics (CEMINACS), University of Aberdeen, Aberdeen, UK
J. J. Rushchitsky
Affiliation:
Timoshenko Institute of Mechanics, Kiev, Ukraine
A. N. Guz
Affiliation:
Timoshenko Institute of Mechanics, Kiev, Ukraine
*
[email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The paper revisits some of the well-known models in the mechanics of structurally heterogeneous media for the purpose of analysing their suitability to describe properties of nanocomposites and their mechanical behaviour. It also presents a new multi-component model for predicting the mechanical properties of micro- and nanocomposites reinforced either by whiskerising the microfibres or by bristlising the nanowires. The mathematical formulation of the model is based on using the Muskhelishvili complex potentials for each domain occupied by a separate component. As an example, the effective elastic constants are computed for fibrous composites with four different densities of whiskerisation. It is shown that the increase in the number of bristles per unit surface of the fibres gives a very strong rise to the value of Young’s modulus. However, the shear modulus, being the driving parameter for the strength estimation of the entire composition, is less sensitive to this factor.

Type
Research Article
Information
The Aeronautical Journal , Volume 117 , Issue 1196 , October 2013 , pp. 1019 - 1036
Copyright
Copyright © Royal Aeronautical Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Bhushan, B. (Ed) Springer Handbook of Nanotechnology, Berlin Heidelberg New York, USA, Springer, 2007.Google Scholar
2. Sattler, K.D. (Ed) Handbook of Nanophysics, 1-7, CRC Press, 2010.Google Scholar
3. Sih, G.C. and Lui, B. Mesofracture mechanics: a necessary link, Theoretical & Applied Fracture Mechanics, 2001, 37, (1-3), pp 371–395.Google Scholar
4. Guz, I.A., Rodger, A.A., Guz, A.N. and Rushchitsky, J.J. Developing the mechanical models for nanomaterials, Composites Part A, 2007, 38, (4), pp 1234–1250.Google Scholar
5. Guz, I.A., Rushchitsky, J.J. and Guz, A.N. Mechanical models for nanomaterials. In: Handbook of Nanophysics (Sattler, K.D. (Ed)). Vol.1. Principles and Methods, CRC Press, 2010, pp 24-1 – 24-12.Google Scholar
6. Duan, H.L., Wang, J. and Karihaloo, B.L. Theory of elasticity at the nanoscale, Advances in Applied Mechanics, 2009, 42, (1), pp 1–68.Google Scholar
7. Young, R.J., Kinloch, I.A., Gong, L. and Novoselov, K.S. The mechanics of graphene nanocomposites: A review, Composite Science & Technology, 2012, 72, (12), pp 1459–1476.Google Scholar
8. Guz, I.A. Continuum solid mechanics at nano-scale: How small can it go? J Nanomaterials & Molecular Nanotechnology, 2012, 1, (1).Google Scholar
9. Guz, I.A., Rodger, A.A., Guz, A.N. and Rushchitsky, J.J. Predicting the properties of micro and nanocomposites: From the microwhiskers to bristled nano-centipedes, The Philosophical Transactions of the Royal Society A, 2008, 366, (1871), pp 1827–1833.Google Scholar
10. Katz, H.S. and Milewski, J.V. (Eds). Handbook of Fillers and Reinforcements for Plastics, New York, USA, Van Nostrand Reinhold Company, 1978.Google Scholar
11. Wang, Y., Tang, Z.Y., Liang, X.R., Liz-Marzan, L.M. and Kotov, N.A. SiO2-coated CdTe nanowires: Bristled nano centipedes, Nano Letters, 2004, 4, (2), pp 225–231.Google Scholar
12. Sharma, S.P. and Lakkad, S.C. Effect of CNTs grows on carbon fibers on the tensile strength of CNTs grown carbon-reinforced polymer matrix composites, Composites: Part A, 2011, 42, (1), pp 8–15.Google Scholar
13. Christensen, R.M. Mechanics of Composite Materials, New York, USA, John Wiley and Sons, 1979.Google Scholar
14 Kelly, A. and Zweben, C. (Eds) Comprehensive Composite Materials, 1-6, Amsterdam, The Netherlands, Elsevier Science, 2000.Google Scholar
15. Muskhelishvili, N.I. Some Basic Problems of the Mathematical Theory of Elasticity, Leiden, Noordhoff, 1953.Google Scholar
16. Gradshteyn, I.S. and Ryzhik, I.M. Tables of Integrals, Series, and Products, London – San Diego: Academic Press, 2000.Google Scholar
17. Nemat-Nasser, S. and Hori, M. Micromechanics: Overall Properties of Heterogeneous Materials, Amsterdam: North-Holland, 1999.Google Scholar
18. Rushchitsky, J.J. Sensitivity of structural models of composite material to structural length scales. International Applied Mechanics, 2006, 42, (12), pp 1364–1370.Google Scholar
19. Guz, I.A. and Rushchitsky, J.J. Comparison of mechanical properties and effects in micro and nano-composites with carbon fillers (carbon microfibres, graphite microwhiskers and carbon nanotubes), Mechanics of Composite Materials, 2004, 40, (3), pp 179–190.Google Scholar
20. Guz, I.A. and Rushchitsky, J.J. Theoretical description of a debonding mechanism in fibrous micro- and nano-composites, International Applied Mechanics, 2004, 40, (10), pp 1129–1136.Google Scholar
21. Guz, I.A. and Rushchitsky, J.J. Computational simulation of harmonic wave propagation in fibrous micro- and nanocomposites, Composite Science & Technology, 2007, 67, (5), pp 861–866.Google Scholar
22. Zhuk, Y. and Guz, I.A. Influence of prestress on the velocities of plane waves propagating normally to the layers of nanocomposites, International Applied Mechanics, 2006, 42, (7), pp 729–743.Google Scholar
23. Zhuk, Y. and Guz, I.A. Features of plane wave propagation along the layers of a prestrained nanocomposite, International Applied Mechanics, 2007, 43, (4), pp 361–379.Google Scholar
24. Lubin, G. (Ed) Handbook of Composites, New York, USA,Van Nostrand Reinhold Company, 1982.Google Scholar
25. Windle, A.H. Two defining moments: A personal view by Prof Alan H. Windle, Composite Science & Technology, 2007, 67, (5), pp 929–930.Google Scholar
26. Paliwal, B. and Cherkaoui, M. Atomistic-continuum interphase model for effective properties of composite materials containing nano-inhomogeneities, Philosophical Magazine, 2011, 91, (30), pp 3905–3930.Google Scholar
27. Guz, I.A. Composites with interlaminar imperfections: Substantiation of the bounds for failure parameters in compression, Composites Part B, 1998, 29, (4), pp 343–350.Google Scholar
28. Guz, A.N. and Guz, I.A. Analytical solution of stability problem for two composite half-planes compressed along interfacial cracks, Composites Part B, 2000, 31, (5), pp 405–418.Google Scholar
29. Guz, I.A. and Herrmann, K.P. On the lower bounds for critical loads under large deformations in non-linear hyperelastic composites with imperfect interlaminar adhesion, Euro J Mechanics. A/Solids, 2003, 22, (6), pp 837–849.Google Scholar
30. Soutis, C. and Guz, I.A. Predicting fracture of layered composites caused by internal instability, Composites Part A, 2001, 32, (9), pp 1243–1253.Google Scholar
31. Soutis, C. and Guz, I.A. Fracture of layered composites by internal fibre instability: Effect of interfacial adhesion, Aeronaut J, 2006, 110, (1105), pp 185–195.Google Scholar
32. Bernal, J.D. Final remarks. A discussion on new materials, Proceedings of the Royal Society A, 1964, 282, pp 1388–1398.Google Scholar