Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-22T11:17:58.993Z Has data issue: false hasContentIssue false
  • English
  • Français

Drag-reduction test of riblets using ARE’s high speed buoyancy propelled vehicle — MOBY-D

Published online by Cambridge University Press:  04 July 2016

Kwing-So Choi
Kwing-So Choi*
Affiliation:
BMT Fluid Mechanics Ltd, Teddington
Get access Rights & Permissions [Opens in a new window]

Abstract

Drag-reduction performance of riblets on an axi-symmetric body was investigated using ARE’s High Speed Buoyancy Propelled Vehicle (MOBY-D) at high Reynolds number. Approximately 35% of the wetted body surface was applied with riblets in situ using BMT’s RIBCOATTM process, and net drag reductions between 0 and 3.0% were observed during the flight. The drag reduction increased toward the ascent as the vehicle acceleration decreased, indicating that the favourable effects that riblets have on the boundary layer structure may be susceptible to acceleration.

Type
Research Article
Information
The Aeronautical Journal , Volume 94 , Issue 933 , March 1990 , pp. 79 - 85
Copyright
Copyright © Royal Aeronautical Society 1990 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Wilkinson, S. P., Anders, J. B., Lazos, B. S. and Bushnell, D. M. Turbulent drag reduction research at NASA Langley - progress and plans. In: Turbulent drag reduction by passive means. The Royal Aeronautical Society, 15-17 Sept 1987, pp 1–32.Google Scholar
2 Savill, A. M., Truong, T. V. and Rhyming, I. L. Turbulent drag reduction by passive means: a review and report on the first European drag reduction meeting. J Theor Appl Mech, 1988, 7, pp 353–378.Google Scholar
3 Choi, K.-S., Pearcey, H. H. and Savill, A. M. Test of drag reducing riblets on a one-third scale racing yacht. In: Turbulent drag reduction by passive means. The Royal Aeronautical Society, 15-17 Sept 1987, pp 377–391.Google Scholar
4 McLean, J. D., George-Falvy, D. N., and Sullivan, P. P. Flight-test of turbulent skin-friction reduction by riblets. In: Turbulent drag reduction by passive means. The Royal Aero nautical Society, 15-17 Sept 1987, pp 408–424.Google Scholar
5 Choi, K.-S. and Johnson, R. Pressure gradient effect on the turbulence structure over riblet surface. Proc 2nd European Turbulence Conference. Berlin, 30 Aug-2 Sept 1988.Google Scholar
6 Squire, L. C. and Savill, A. M. Some experiences of riblets at transonic speeds. In: Turbulent drag reduction by passive means. The Royal Aeronautical Society, 15-17 Sept 1987, pp 392–407.Google Scholar
7 Gaudet, L. An assessment of the drag reduction properties of riblets and the penalties of off-design conditions. In: Turbulent drag reduction by passive means. The Royal Aeronautical Society, 15-17 Sept 1987, pp 363–376.Google Scholar
8 Choi, K.-S. Near-wall structure of turbulent boundary layer with riblets. J Fluid Mech, 1989, pp 417–458.Google Scholar
9 Sellin, R. H. J. and Moses, R. T. (Eds): Drag reduction in fluid flows: Techniques for friction control. Ellis Horwood, 1989.Google Scholar
10 Gillcrist, M. C. and Reidy, L. W. Drag Measurements on Marine Vehicles With a Riblet Surface Coating. AIAA Paper 89-2932, 1989.Google Scholar