Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T11:57:05.030Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and optimisation of the external load bearing carry through structure of a columned multi bubble fuselage

Published online by Cambridge University Press:  27 January 2016

S. H. Cho ,
C. Bil  and
R. Adams
S. H. Cho*
Affiliation:
School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Melbourne, Australia
C. Bil*
Affiliation:
School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Melbourne, Australia
R. Adams*
Affiliation:
School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Melbourne, Australia
*
[email protected]
[email protected]
[email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The blended wing-body configuration holds a major structural design challenge at the centre-body where the structure must support both wing bending loads and internal cabin pressure. A membrane approach is proposed which decouples the loads to allow their resistance by two independent structures: an inner membrane for cabin pressure and an outer structure to resist wing loads. A columned multi-bubble fuselage is proposed for the inner membrane structure, which are multispherical configuration to efficiently withstand the pressure loads. Considering this configuration, the carry-through structure can be designed and optimised. Finite element results show a significant reduction of stress level in this design over that for a conventional multi-bubble fuselage. Up to 30% weight reduction is achieved for a military cargo application that requires an extensive area with no structural interruption. For the outer carry-through structure, the topology and shape optimisations of finite element models were performed on the given design domain. The results from the shape and topology optimisations were complementary demonstrating a consistent design approach. The optimisation theory is briefly presented along with the results.

Type
Research Article
Information
The Aeronautical Journal , Volume 117 , Issue 1187 , January 2013 , pp. 97 - 108
Copyright
Copyright © Royal Aeronautical Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Liebeck, R.H. Design of the blended wing body subsonic transport, J Aircr, January-February 2004, 41, (1), pp 10–25.Google Scholar
2. Liebeck, R.H., Page, M.A. and Rawdon, P.K. Blended-Wing-Body Subsonic Commercial Transport, AIAA Paper 1998-0438, January 1998.Google Scholar
3. Mukhopadhyay, V. Blended – Wing-Body (BWB) Fuselage Structural Design for Weight Reduction, AIAA Paper 2005-2349, 2005.Google Scholar
4. Miu, M. Airframe Structural Design, Hong Kong Conmilit Press Ltd, 1999.Google Scholar
5. Cho, S.H. and Bil, C. Columned Multi Bubble Fuselage (CMBF) for BWB, SAE International AeroTech, LA, USA, 2007.Google Scholar
6. Altair Optistruct User’s Guide: Version 6.0, Altair Engineering, 2003.Google Scholar
7. Bradley, K.R. A Sizing Methodology for the Conceptual Design of Blended-Wing-Body Transports, MS Thesis, Joint Institute for Advancement of Flight Sciences, George Washington University, September 2003.Google Scholar
8. Qin, N. Aerodynamic Studies for Blended Wing Body Aircraft, AIAA Paper 2002-5448, September 2002 Google Scholar