Published online by Cambridge University Press: 04 July 2016
A review is given of current methods in theoretical aerodynamics which are useful in the design of aircraft wings for subsonic and transonic speeds. These are of two basic types:
(A) direct methods for calculating the flow over a givenwing shape. In the design process, these can be used to obtain a rapid estimate of the effect of a specified change in wing shape. The most practical methods of this type make use of the viscous/inviscid interaction technique; some recent methods are described and examples are given of their use, both in two and three dimensions, including comparisons with experiment.
(B) inverse methods in which the shape is calculated explicitly, as a result of either (a) specifying the surface pressure distribution on the wing, or (b) requiring that some suitable ‘target’ function, usually the drag/lift ratio, shall be a minimum. At present, these methods are restricted to inviscid flow.
Several examples of both ‘pressure’ and ‘optimisation’ methods are discussed, and their advantages and limitations considered.
Based on a lecture given to the Royal Aeronautical Society on 1 April 1987.