Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-26T11:10:37.238Z Has data issue: false hasContentIssue false
  • English
  • Français

Some Corrosion Problems Relating to Modern Aircraft

Published online by Cambridge University Press:  28 July 2016

A. J. Sidery  and
J. W. W. Willstrop
Get access Rights & Permissions [Opens in a new window]

Extract

It is well known that, under certain conditions, duralumin and other wrought aluminium alloys are liable to suffer intercrystalline attack, such corrosion being frequently accompanied by little visible corrosion product on the surface of the material. The necessity for careful temperature control during the solution heat treatment of duralumin and the beneficial influence of a rapid rate of cooling after such heat treatment on the corrosion-resistance of this material are now too widely appreciated to need emphasis here.

Type
Proceedings
Information
The Aeronautical Journal , Volume 43 , Issue 344 , August 1939 , pp. 605 - 628
Copyright
Copyright © Royal Aeronautical Society 1939

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Note on page No 606 * In the sea water spray test the specimens were suspended in the open air, but protected from rain, and were sprayed three times a day with natural sea water.

Note on page No 610 * F. R. Banks. Journal of the Institution of Petroleum Technologists, Vol. 23, No. 160, February, 1937.

Note on page No 613 * U. R. Evans. “Metallic corrosion, passivity and protection,” p. 167 et seq.