Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-31T14:31:35.906Z Has data issue: false hasContentIssue false
  • English
  • Français

Performance enhancement evaluation of an actuated trailing edge flap

Published online by Cambridge University Press:  04 July 2016

W. Chan  and
A. Brocklehurst
W. Chan
Affiliation:
Rotor Systems Group, Westland Helicopters Yeovil, Somerset, UK
A. Brocklehurst
Affiliation:
Rotor Systems Group, Westland Helicopters Yeovil, Somerset, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

An analytical evaluation of the performance enhancement due to a servo-actuated trailing edge flap was carried out using the coupled rotor-fuselage model (CRFM). The performance enhancement from a trailing edge flap is achieved by introducing effective camber around the azimuth for a nominal aerofoil. An investigation on the best combination of flap parameters, namely the span, position, chord and deflection was carried out in order to identify an optimal configuration within given design constraints. The effects on vibratory control loads over a range of speed for a flap of 10% span, 20% chord, actuated at once per rev has expanded the retreating blade envelope for a Lynx aircraft by some 20kt. The flap hinge load was also examined and it was found not to be excessive. It was also confirmed that an actuated trailing edge flap does not have adverse effect on the pilot's control inputs to trim to a particular flight condition. This paper will discuss the aerodynamic enhancements derived from the application of the trailing edge flap and present conclusions drawn from this study.

Type
Research Article
Information
The Aeronautical Journal , Volume 105 , Issue 1049 , July 2001 , pp. 391 - 399
Copyright
Copyright © Royal Aeronautical Society 2001 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Friedmann, P.P. The promise of adaptive material for alleviating aero-elastic problems and some concerns, 1997, RAeS proceedingson Innovation in Rotorcraft Technology, London 24-25 June 1997.Google Scholar
2. Straub, F.K. Active flap control for vibration reduction and performance improvement, 1995, AHS 51st AnnualForum, Texas, May 1995.Google Scholar
3. Chopra, I. Application of smart structures technology to rotorcraft systems, J Smart Mat Structures, February 1996, 5, (1).Google Scholar
4. Chen, P.C. and Chopra, I. Hover testing of smart rotor with induced-strain actuation of blade twist, AIAA J, January 1997, 35, (1).Google Scholar
5. Copland, C. A review of smart rotor technology, unpublished DERA Report, June 1998.Google Scholar
6. Straub, F.K. and Hassan, A.A. Aeromechanic considerations in the design of a rotor with smart material actuated trailing edge flaps, 1996, American Helicopter Society 52nd Forum, Washington DC, June 1996.Google Scholar
7. Straub, F.K. and Merkley, D.J. Design of a servo-flap rotor for reduced control loads, 1994, AHS 50th Forum, May 1994.Google Scholar
8. Chan, W., Holton, S.A. and Hamm, J.C. Results of initial aircraft manoeuvre simulation on the coupled rotor-fuselage model, 1999, American Helicopter Society 55th Forum, Montreal, Quebec, Canada, May 1999.Google Scholar
9. Beddoes, T.S. Onset of leading edge separation effects under dynamic conditions and’ low Mach numbers, 1978, American Helicopter Society 34th Annual Forum, Washington, DC, May 1978.Google Scholar
10. Hamm, J.C. The development of helicopter pilot models to control engineering simulations, 1994, Royal Aeronautical Society Conference on Rotorcraft Simulation, 18 May 1994.Google Scholar
11. Lau, B.H., Louie, A.W., Griffiths, N. and Sotiriou, C.P. Correlation of the Lynx-XZ170 flight test results up to and beyond the stall boundary, 1993, American Helicopter Society 49th Annual Forum, St Louis, Missouri, May 1993.Google Scholar