Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-06T12:26:40.606Z Has data issue: false hasContentIssue false
  • English
  • Français

An investigation of the grid fins as control surface devices for missiles

Published online by Cambridge University Press:  04 July 2016

S. Chen ,
M. Khalid ,
H. Xu  and
F. Lesage
S. Chen
Affiliation:
Institute of Aerospace Research (IAR), National Research Council (NRC), Ontario, Canada
M. Khalid
Affiliation:
Institute of Aerospace Research (IAR), National Research Council (NRC), Ontario, Canada
H. Xu
Affiliation:
Institute of Aerospace Research (IAR), National Research Council (NRC), Ontario, Canada
F. Lesage
Affiliation:
Defense Research Establishment Valcartier (DREV), Canada
Get access Rights & Permissions [Opens in a new window]

Abstract

Recently, grid fins have been receiving increasing attention as a practical and efficient means of controlling missile trajectory. Preliminary studies at IAR have demonstrated that modern CFD methods can be used for computing flows past complex grid fin type configurations, and that these methods are more soundly physically based than the earlier vortex lattice and/or shock expansion methods.

The current paper addresses the issue of the grid fin size, in terms of both the panel thickness and the frontal shape. The study covers three thicknesses for the grid fin panel, with front shapes having a simple blunt square face, as well as a sharp knife-edge shape. In addition, an important aspect of the present investigation is to quantify the aerodynamic effect of the ramp fairing installed immediately upstream of the blunt base upon which the grid fin assembly resides. A comparison of flow field characteristics and aerodynamic coefficients of the grid fin assembly, with and without the fairing ramp, would provide a direct means of evaluating the effect of the ramp. At this stage, the investigations are based on Euler calculations. The present study focuses on a standard grid fin configuration mounted on a generic cylindrical body.

Type
Research Article
Information
The Aeronautical Journal , Volume 104 , Issue 1034 , April 2000 , pp. 183 - 190
Copyright
Copyright © Royal Aeronautical Society 2000 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Sun, Y. and Khalid, M. Prediction of supersonic flow around grid fin missile using NPARC, 5th annual conference of the Computational Fluid Dynamics Society of Canada, CFD 97, 25-27, May 1997.Google Scholar
2. Sun, Y. and Khalid, M. A CFD investigation of grid fin missiles, AIAA 98-3571, 34th AIAA/ASME/SAER/ASEE joint propulsion conference and exhibits, Cleveland, 13-15 My 1998.Google Scholar
3. Khalid, M., Sun, Y. and Xu, H. Computation of flows past grid fin missiles, symposium of the AVT on missile aerodynamics, Sorrento, Italy, 11-15 May 1998.Google Scholar
4. Xu, H., Khalid, M., Chen, S. and Lesage, F. Investigation of grid fins as modern control surface devices for enhancing missile aerodynamic performance, 46th annual conference of the Canadian Aeronautics and Space Institute, Montreal, Canada, 3-5 May 1999.Google Scholar
5. Washington, D.W., Booth, P.F. and Miler, M.S. Curvature and leading edge sweep backeffects on grid fin aerodynamic characteristics, AIAA-93-3480-CP, 1993.Google Scholar
6. Washington, D. W. and Miller, M.S. Grid fins - a new concept for missile stability and control, 31st Aerospace Sciences meeting & exhibits, AIAA 93-0035, Reno, 11-14 January 1993.Google Scholar
7. Miller, M.S. and Washington, D.W. An experimental investigation of grid fin drag reduction techniques, AIAA-94-1914-CP, 1994.Google Scholar
8. Brooks, R.A. and Burkhaltar, J.E. Experimental and analytical analysis of grid fin configurations. J Aircr, September 1989.Google Scholar
9. Burkhaltar, J.E. Grid fins for missile applications in supersonic flow, AIAA-96-0194, 34th Aerospace Sciences meeting and exhibits, Reno, 15-18 January 1996.Google Scholar
10. NASA LERC/AEDC Alliance, NPARC user's guide, Version 3.0, Washington, September 1996.Google Scholar
11. Cooper, G.K. and Sirbaugh, J.R. PARC Code: theory and usage AEDC-TR-89-15, Sverdrup TechnologyGoogle Scholar
12. Simpson, G.M. and Sadler, A.J. Lattice controls: A comparison with conventional, planar fins, RTO-MP-5, Missile aerodynamics, Sorrento, Italy, 1998.Google Scholar