Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-06T06:52:26.070Z Has data issue: false hasContentIssue false

X-ray Diffraction/Electron Microprobe Analysis of Surface Films Formed on Alloys During Hydrothermal Reaction with Geologic Materials

Published online by Cambridge University Press:  06 March 2019

R. G. Johnston
Affiliation:
Rockwell Hanford Operations Basalt Waste Isolation Project Richland, Washington 99352
M. B. Strope
Affiliation:
Rockwell Hanford Operations Basalt Waste Isolation Project Richland, Washington 99352
R. P. Anantatmula
Affiliation:
Rockwell Hanford Operations Basalt Waste Isolation Project Richland, Washington 99352
Get access

Abstract

X-ray diffraction and electron microprobe analysis were used in combination to identify reaction phases that formed on the surfaces of low-carbon steel specimens reacted with a 75% basalt-25% bentonite mixture and anion-doped water in sealed pressure vessels at 100°C and 250°C. Reaction phases on specimen surfaces and in adhering geologic material were identified by conventional X-ray diffraction scans of entire specimens with intact reaction layers. Comparison of results from adhering geologic material and scans of selectively removed layers allowed establishment of approximate reaction gradients in the adhering packing material. Electron microprobe analysis of specimens in cross-section provided quantitative chemical analyses of adhering reaction phases, and identification of reaction layer composition gradients and thicknesses. Magnetite formed on the surface of specimens reacted at 250°C for 4 weeks. Iron-enriched clay was also observed on specimen surfaces and in the adjacent basalt-bentonite mixture. The 100°C experiments yielded surface films of a siderite-structure phase, (Fe,Ca,Mn)CO3, that were not observed in previous experiments with synthetic ground-water. Less extensive iron enrichment of the adjacent clays compared to that seen in the 250°C experiments was observed. The siderite-structure phase generally formed when no carbonate ion was present in the initial solution, implying dissolution of impurity calcite in the bentonite as the controlling factor in the reaction. The results demonstrate the utility of combining X-ray diffraction and electron microprobe analysis for characterization of reaction phases on alloys reacted with complex geologic materials.

Type
X. XRD Applications
Copyright
Copyright © International Centre for Diffraction Data 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Anantatmula, R. P., Delegard, C. H., and Fish, R.L., Corrosion of Low-Carbon Steel in Grande Ronde Groundwater in the Presence of Basalt-Bentonite Packing, in “Scientific Basis for Nuclear Waste Management, VII,” McVay, G. L., ed., Elsevier, New York, New York (1984).Google Scholar
2. Palmer, R. A., Aden, G. D., Johnston, R. G., Jones, T. E., Lane, D. L., and Noonan, A.L., “Characterization of Reference Materials for the Barrier Materials Test Program,” RHO-BW-ST-27 P, Rockwell Hanford Operations, Richland, Washington (1982).Google Scholar
3. Jones, T. E., “Reference Material Chemistry-Synthetic Groundwater Formation,” RHO-BW-ST-37 P, Rockwell Hanford Operations, Richland, Washington (1982).Google Scholar
4. Allen, C. C., Lane, D. L., Palmer, R. A., and Johnston, R.G., Experimental Studies of Packing Material Stability, in “Scientific Basis for Nuclear Waste Management, VII,” McVay, G. L., ed., Elsevier, New York, New York (1984).Google Scholar
5. JCPDS-International Centre for Diffraction Data, “Mineral Powder Diffraction File,” JCPDS, Swarthmore, Pennsylvania (1980).Google Scholar
6. Ruther, W. E. and Hart, R.K., “Influence of Oxygen on High- Temperature Aqueous Corrosion of Iron,” Corrosion, 19, 127t (1963).Google Scholar