Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-25T02:23:36.929Z Has data issue: false hasContentIssue false
  • English
  • Français

The X-Ray Diffraction Measurement of Residual Stresses in Aluminum Alloys

Published online by Cambridge University Press:  06 March 2019

Ronald C. Larson
Ronald C. Larson*
Affiliation:
Sundstrand Aviation Rockford, Illinois
Get access

Abstract

This paper presents the theoretical and practical aspects of measuring residual stresses by X-ray diffraction with emphasis on the analysis of aluminum alloys. The theoretical considerations of radiation) beam geometry, and peak location will be discussed in regard to establishing optimum analysis techniques. The precision and reproducibility of this technique have been investigated so that results can be applied accurately. The approach, however, is basically a practical one, with the intent of studying residual stress systems as they affect engineering applications. Residual stress systems produced by thermal and mechanical treatments have been determined and the effect of treatment modifications and variations on the resultant stress system have been analyzed. The effect of operational variables such as time and temperature on the developed stress system are shown. From this, the merits of a particular treatment can be determined with respect to its intended application.

Analysis of solution heat-treated and quenched 2014 aluminum has shown a significant effect of the quench temperature on the resultant residual stress system. The results obtained from shot-peening this alloy are presented, as well as the effect of time and temperature on the shot-peened stress gradient.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 7: Twelfth Annual Conference on Applications of X-ray Analysis, August 7-9, 1963 , 1963 , pp. 31 - 45
Copyright
Copyright © International Centre for Diffraction Data 1963

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Koistinen, D. P. and Marburger, R. E., “Simplified Procedures for Calculating Peak Position in X-ray Residual Stress Measurements on Hardened Steels,” ASM Transactions 51: 537, 1959.Google Scholar
2. Evans, W. P. and Littman, W. E., “Macro and Micro Residual Stresses,” SAE Journal, March 1963.Google Scholar
3. Ogilvie, R. E., “Stress Measurement with X-ray Spectrometer,” M. S. Thesis, MIT, 1952.Google Scholar
4. Sherby, O. D. and Dorn, J. E., “Creep Correlations in Alpha Solid Solutions of Aluminum,” J. Metals 4: 959, 1952.Google Scholar
5. Dorn, J. E., “The Spectrum of Activation Energies for Creep,” Creep and Recovery, ASM, 1957, pp. 255-283.Google Scholar
6. Sherby, O. D. and Simnad, M. T., “Prediction of Atomic Mobility in Metallic Systems,” ASM Trans. Quart. 54: 227, 1961.Google Scholar