Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-27T12:05:43.976Z Has data issue: false hasContentIssue false
  • English
  • Français

Problems in the Temperature Calibration of an X-Ray Diffractometer Furnace*

Published online by Cambridge University Press:  06 March 2019

F.A. Mauer  and
L.H. Bolz
F.A. Mauer
Affiliation:
National Bureau of Standards, Washington, D.C.
L.H. Bolz
Affiliation:
National Bureau of Standards, Washington, D.C.
Get access

Abstract

Tests were carried out with an X-ray diffractometer furnace to determine the temperature variations from point to point in the specimen and the correction to be applied to thermocouple readings. It was found that, under the conditions of the tests, temperature corrections depend on the preparation and properties of the sample. Calibration curves for two standards are given to illustrate this point, and suggestions for improving temperature measurements are made.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 5: Tenth Annual Conference on Applications of X-ray Analysis, August 7-9, 1961 , 1961 , pp. 229 - 237
Copyright
Copyright © International Centre for Diffraction Data 1961

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

This work was supported by the Aeronautical Research Laboratory, Office of Aerospace Resarch, Wright — Patterson Air Force Base, Ohio, United States Air Force.

References

1. Mauer, P. A. and Bolz, L. H., “Thermal Expansion of Cermet Components by High Temperature X-ray Diffraction,” Nat. Bur. Standards (U.S.) Report 3148, November 1953.Google Scholar
2. Owen, E. A., “A High Temperature X-ray Analysis Camera,” J. Sci. Instr., Vol. 20, No. 12, December 1543, p. 190 and “A High Ternperature X-ray Camera for Use with Plate Specimens,” J. Sci. Instr., Vol. 26, No. 4. April 1949, p. 114.Google Scholar
3. Pease, R. S., “The Measurement of Specimen Temperature in a High Temperature X-ray Powder Camera,” J. Sci. Instr., Vol. 32, No. 12, December 1955, p. 476.Google Scholar
4. Brand, J. A. and Goldschmidt, H. J., “The Temperature Calibration of a High Temperature X-ray Diffraction Camera,” J. Sci. Instr., Vol. 33, No. 2, February 1956, p. 41.Google Scholar
5. Rossini, F. D., Wagman, D. D., Evans, W. H., Levine, S., and Jaffe, I., “Selected Values of Chemical Thermodynamic Properties,” Nat. Bur. Standards (U.S.) Circ. 500, 1952, pp. 629 and 677.Google Scholar
6. Forsythe, W. E. (ed.), “Smithsonian Physical Tables,” Smithsonian Misc. Collections, Vol. 120, 9th ed. 1954, pp. 126-129.Google Scholar
7. Hume-Rothery, W. and Reynolds, P. W., “A High Temperature Debye-Scherrer Camera, and its Application to the Study of the Lattice Spacing of Silver,” Proc. Roy. Soc. (London), Vol. A167, No. A928, July 7, 1938, p. 25.Google Scholar
8. Esser, H. and Eusterbrock, H., “Untersuchung der Warmeausdehnung von einigen Metallen und Legierungen mir einem verbesserten Dilatometer,” Arch. Eisenhuttenw., Vol. 14, No. 7, January 1941, p. 341.Google Scholar
9. Worthing, A. G., “The Thermal Expansion of Tungsten at Incandescent Temperatures,” Phys. Rev., Vol. 10, No. 6, December 1917, p. 638.Google Scholar
10. Goldschmidt, H. J. and Cunningham, J., “A High Temperature X-ray Diffraction Camera,” J. Sci. Instr., Vol. 27, No, 7, July 1950, p. 177.Google Scholar