The problem of the plane H-polarized electromagnetic wave scattering by flat pre-fractal impedance strips' gratings is examined. For this purpose, a mathematical model in the form of the first kind singular integral equation system is modified for correct usage. Considerable attention is focused on the asymptotic model of the H-polarized electromagnetic wave scattering by sparsely filled grating, which has an explicit solution. The scattered electromagnetic field in the far-zone is considered in details. Dependences of scattering integral characteristics on values of the strip impedance and angles of the plane H-polarized electromagnetic wave incidence upon the grating are studied.

Inhomogeneous materials (the ones exhibiting spatial variations in their, all or specific, material properties) present a great deal of interest for scientists and engineers in both academia and industry. For over a hundred years, the mechanical behavior of inhomogeneous materials excites numerous attempts in mathematical modeling and development of methods for proper analysis and verification. With this concern, the reach experience was gained by scientists of different scientific schools in many countries. Despite numerous significant achievements, some results, unfortunately, remain unnoticed by the wide scientific community. On the other hand, one can observe a growing number of publications which repeatedly publish the solutions reported years ago or deal with the similar problems with slight modifications. The main objective of this paper is to: i) present a brief survey of the development history of the elastic analysis of inhomogeneous solids and ii) characterize some dominant analytical and semi-analytical methods. It was not our intent here to provide a comprehensive list of references on the topic, which is nearly impossible to make in view of rapidly growing number of publications and other restrictions, but to emphasize some important, in our opinion, stages of the development, methods and results.

The recent discovery of a Roman ceramics manufacturing workshop at Montelabate (Perugia, Italy), in use from the first century BC until the late-fourth to fifth centuries AD, offers a unique opportunity to study the technical processes for producing Roman amphorae. Ancient and modern clays were sampled and analysed; they do not differ significantly, supporting the hypothesis of the exploitation of the rich local clay source that allowed a continuity of production. Characterization of the clays was performed using geotechnical methods (Atterberg limits and size distribution) and by thermogravimetric and differential thermogravimetric analysis, Fourier-transform infrared spectroscopy, X-ray diffraction and X-ray fluorescence analyses. The material was suitable for pottery making with the addition of calcite and quartz sand temper. Production waste and discarded materials as well as good-quality products were also analysed with the same methodology. It is therefore possible to reconstruct the ancient technology by defining the recipe for the production of the amphorae and their firing temperature on the basis of the decomposition of clay materials and the presence of newly formed minerals.

Human fascioliasis infection sources are analysed for the first time in front of the new worldwide scenario of this disease. These infection sources include foods, water and combinations of both. Ingestion of freshwater wild plants is the main source, with watercress and secondarily other vegetables involved. The problem of vegetables sold in uncontrolled urban markets is discussed. Distinction between infection sources by freshwater cultivated plants, terrestrial wild plants, and terrestrial cultivated plants is made. The risks by traditional local dishes made from sylvatic plants and raw liver ingestion are considered. Drinking of contaminated water, beverages and juices, ingestion of dishes and soups and washing of vegetables, fruits, tubercles and kitchen utensils with contaminated water are increasingly involved. Three methods to assess infection sources are noted: detection of metacercariae attached to plants or floating in freshwater, anamnesis in individual patients, and questionnaire surveys in endemic areas. The infectivity of metacercariae is reviewed both under field conditions and experimentally under the effects of physicochemical agents. Individual and general preventive measures appear to be more complicated than those considered in the past. The high diversity of infection sources and their heterogeneity in different countries underlie the large epidemiological heterogeneity of human fascioliasis throughout.

An efficient and robust method to measure vitamin D (25-hydroxy vitamin D3 (25(OH)D3) and 25-hydroxy vitamin D2 in dried blood spots (DBS) has been developed and applied in the pan-European multi-centre, internet-based, personalised nutrition intervention study Food4Me. The method includes calibration with blood containing endogenous 25(OH)D3, spotted as DBS and corrected for haematocrit content. The methodology was validated following international standards. The performance characteristics did not reach those of the current gold standard liquid chromatography-MS/MS in plasma for all parameters, but were found to be very suitable for status-level determination under field conditions. DBS sample quality was very high, and 3778 measurements of 25(OH)D3 were obtained from 1465 participants. The study centre and the season within the study centre were very good predictors of 25(OH)D3 levels (P<0·001 for each case). Seasonal effects were modelled by fitting a sine function with a minimum 25(OH)D3 level on 20 January and a maximum on 21 July. The seasonal amplitude varied from centre to centre. The largest difference between winter and summer levels was found in Germany and the smallest in Poland. The model was cross-validated to determine the consistency of the predictions and the performance of the DBS method. The Pearson’s correlation between the measured values and the predicted values was r 0·65, and the sd of their differences was 21·2 nmol/l. This includes the analytical variation and the biological variation within subjects. Overall, DBS obtained by unsupervised sampling of the participants at home was a viable methodology for obtaining vitamin D status information in a large nutritional study.

Introduction. Chlordecone (CLD), an organochlorine formerly used to control the banana black weevil, is strongly adsorbed on soils, particularly on andosols. A simplified analytical procedure for the quantitative determination of chlordecone residues in water and micro-samples of soil and plants was compared with a standard method. Materials and methods. The procedure combines a simplified sampling protocol and a 10-min solid phase microextraction (SPME), followed by gas chromatographic separation (GC) and mass spectrometric (MS and MS/MS) identification. Quantitation of CLD used a standard addition method with zero extrapolation. First, seventy samples were analysed using the proposed method and the standard method based on hot solvent extraction. Second, fifteen soil samples were analysed with two SPME methods followed by GC-MS but using CLD labelled with C13 as an internal standard or the proposed method. Results and discussion. The detection (LOD) and quantitation (LOQ) limits of our SPME extraction procedure were determined for GC-MS and GC-MS/MS with water, plant (pineapple roots) and soil samples: in water for MS/MS, LODMS/MS-water = 0.5 ng×L–1, LOQMS/MS-water = 2.0 ng×L–1; in andosol for MS/MS, LODMS/MS-soil = 15.0 ng×kg–1 dw, LOQMS/MS-soil = 80.0 ng×kg–1 dw. Data from the seventy contaminated soils obtained with the proposed method and the standard method showed a correlation coefficient of r = 0.86. Data obtained by the two SPME/GC-MS quantitation procedures showed a correlation of r = 0.8073. Conclusion. The method proposes a simplified sample preparation and extraction of CLD in water, plant and soil samples, with no solvent manipulation and which is not time-consuming. The LOD and LOQ were similar to those obtained with other currently used methods. The method is reliable and accurate and may be considered as a good tool for research purposes.

The safety of the food supply is a subject of intense interest to consumers, particularly as a result of large-scale outbreaks that involve hundreds and sometimes thousands of consumers. During the last decade, this concern about food safety has expanded to include the diets of companion animals as a result of several incidences of chemical toxicities and infectious disease transmission. This has led to increased research into the causes and controls for these hazards for both companion animals and their owners. The following summary provides an introduction to the issues, challenges and new tools being developed to ensure that commercial pet foods are both nutritious and safe.

Metabolomics aims to profile all small molecules that are present in biological samples such as biofluids, tissue extracts and culture media. Combining the data obtained with multivariate data analysis tools allows the exploration of changes induced by a biological treatment or changes resulting from phenotype. Recently, there has been a large increase in interest in using metabolomics in nutritional research and because of the intimate relationship between nutrients and metabolism there exists great potential for the use of metabolomics within nutritional research. However, for metabolomics to reach its full potential within this field it is also important to be realistic about the challenges that are faced. Examples of such challenges include the necessity to have a clear understanding of the causes of variation in human metabolomic profiles, the effects of the gut microflora on the metabolomic profile and the interaction of the gut microflora with the host's metabolism. A further challenge that is particularly relevant for human nutritional research is the difficulty associated with biological interpretation of the data. Notwithstanding these and other challenges, several examples of successful applications to nutritional research exist. The link between the human metabolic phenotype, as characterised by metabolomic profiles, and dietary preferences proposes the potential role of metabolomics in personalised nutrition.

The availability of ‘omics’ technologies is transforming scientific approaches to physiological problems from a reductionist viewpoint to that of a holistic viewpoint. This is of profound importance in nutrition, since the integration of multiple systems at the level of gene expression on the synthetic side through to metabolic enzyme activity on the degradative side combine to govern nutrient availability to tissues. Protein activity is central to the process of nutrition from the initial absorption of nutrients via uptake carriers in the gut, through to distribution and transport in the blood, metabolism by degradative enzymes in tissues and excretion through renal tubule exchange proteins. Therefore, the global profiling of the proteome, defined as the entire protein complement of the genome expressed in a particular cell or organ, or in plasma or serum at a particular time, offers the potential for identification of important biomarkers of nutritional state that respond to alterations in diet. The present review considers the published evidence of nutritional modulation of the proteome in vivo which has expanded exponentially over the last 3 years. It highlights some of the challenges faced by researchers using proteomic approaches to understand the interactions of diet with genomic and metabolic–phenotypic variables in normal populations.

A simple method of estimating changes in biologically active soil carbon (C) could help evaluate soil quality impacts of alternative management practices. Most reports of permanganate for active C determination use highly concentrated solutions (0.333 M) that are difficult to work with and tend to react with a large fraction of soil C that is not well distinguished from total organic C. We report on a highly simplified method in which dilute, slightly alkaline KMnO4 reacts with the most readily oxidizable (active) forms of soil C, converting Mn(VII) to Mn(II), and proportionally lowering absorbance of 550 nm light. The amount of soil C that reacted increased with concentration of KMnO4 used (0.01 to 0.1 M), degree of soil drying (moist fresh soil to air-dried for 24 hour) and time of shaking (1–15 minutes). Shaking of air-diy soil in a 0.02 M KMnO4 solution for 2 minutes produced consistent and management-sensitive results, both in the laboratory and with a field kit that used a hand-held colorimeter. Addition of 0.1 M. CaCl2 to the permanganate reagent enhanced settling of the soil after shaking, eliminating the need for centrifugaron in the field kit. Results from the laboratory and field-kit protocols were nearly identical (R2 = 0.98), as were those from an inter-laboratory sample exchange (R2 = 0.91). The active soil C measured by the new procedure was more sensitive to management effects than total organic C, and more closely related to biologically mediated soil properties, such as respiration, microbial biomass and aggregation, than several other measures of soil organic C.

New crop production technologies developed in response to growing concern over environmental contamination from agriculture may be neither more profitable nor higher yielding than the systems they replace, but they often reduce environmental contamination or improve soil and water quality. Systems designed with environmental objectives cannot be evaluated fairly just by productivity, which is what often is done in economic studies of alternative systems. We review 58 recent studies comparing alternative crop production systems to identify the key criteria for system comparisons, the system characteristics important in designing the analysis, and the methods most suited for comparing alternative systems.

The four key criteria we looked for in system comparisons are expected profit, stability of profits, expected environmental impacts, and stability of environmental impacts. Most economic studies of crop production focus exclusively on profitability, and incorporate neither environmental criteria nor the dynamic characteristics inherent in alternative systems. We identify promising new approaches that take account of specific environmental characteristics and attempt to balance the objectives of profitability and environmental risk management. Balanced environmental-economic analysis is most likely to be achieved by integrating biophysical simulation models with economic optimization methods to model the trade-offs among profitability, environmental impact, and system stability (both financial and environmental).