Glyphosate-tolerant and glyphosate-resistant weeds are becoming increasingly problematic in cotton fields in Australia, necessitating a return from a glyphosate dominated system to a more integrated approach to weed management. The development of an integrated weed management system can be facilitated by identifying the critical period for weed control (CPWC), a model that enables cotton growers to optimize the timing of their weed control inputs. Using data from field studies conducted from 2003 to 2015, CPWC models using extended functions, including weed biomass in the relationships, were developed for the mimic weeds, common sunflower and Japanese millet, in high-yielding, fully irrigated cotton. A multispecies CPWC model was developed after combining these data sets with data for mungbean in irrigated cotton, using weed height and weed biomass as descriptors in the models. Comparison of observed and predicted relative cotton-lint yields from the multispecies CPWC model demonstrated that the model reasonably described the competition from these three very different mimic weeds, opening the possibility for cotton growers to use a multispecies CPWC model in their production systems.

In Bangladesh, weeds in transplanted rice are largely controlled by labor-intensive and costly manual weeding, resulting in inadequate and untimely weed control. Labor scarcity coupled with intensive rice production has triggered increased use of herbicides. These factors warrant a cost-effective and strategic integrated weed management (IWM) approach. On-farm trials with transplanted rice were conducted during monsoon (‘Aman’) season in 2016 and 2017 and winter (‘Boro’) season in 2016 to 2017 in agroecological zones 11 and 12 with ten treatments—seven herbicide-based IWM options, one mechanical weed control-based option, and two checks (farmers’ current weed control practice and weed-free)—to assess effects on weed control, grain yield, labor use, and profitability. Compared to farmers’ practice, herbicide-based IWM options with mefenacet + bensulfuron-methyl as preemergence followed by (fb) either bispyribac-sodium or penoxsulam as postemergence fb one hand-weeding were the most profitable alternatives, with reductions in labor requirement by 11 to 25 person-days ha–1 and in total weed control cost by US$44 to 94 ha–1, resulting in net returns increases by US$54 to 77 ha–1 without compromising on grain yield. In contrast, IWM options with bispyrbac-sodium or penoxsulam as postemergence application fb one hand-weeding reduced yields by 12% to 13% and profits by US$71 to 190 ha–1. The nonchemical option with mechanical weeding fb one hand-weeding performed similarly to farmers’ practice on yield and profitability. We suggest additional research to develop feasible herbicide-free approaches to weed management in transplanted rice that can offer competitive advantages to current practices.

A major concern of sweetpotato producers is the potential negative effects from herbicide drift or sprayer contamination events when dicamba is applied to nearby dicamba-resistant crops. A field study was initiated in 2014 and repeated in 2015 to assess the effects of reduced rates of N,N-Bis-(3-aminopropyl)methylamine (BAPMA) or diglycloamine (DGA) salt of dicamba, glyphosate, or a combination of these individually in separate trials with glyphosate on sweetpotato. Reduced rates of 1/10, 1/100, 1/250, 1/500, 1/750, and 1/1,000 of the 1× use rate of each dicamba formulation at 0.56 kg ha−1, glyphosate at 1.12 kg ha−1, and a combination of the two at aforementioned rates were applied to ‘Beauregard’ sweetpotato at storage root formation (10 d after transplanting) in one trial and storage root development (30 d after transplanting) in a separate trial. Injury with each salt of dicamba (BAPMA or DGA) applied alone or with glyphosate was generally equal to or greater than glyphosate applied alone at equivalent rates, indicating that injury is most attributable to the dicamba in the combination. There was a quadratic increase in crop injury and a quadratic decrease in crop yield (with respect to most yield grades) observed with an increased herbicide rate of dicamba applied alone or in combination with glyphosate applied at storage root development. However, with a few exceptions, neither this relationship nor the significance of herbicide rate was observed on crop injury or sweetpotato yield when herbicide application occurred at the storage root formation stage. In general, crop injury and yield reduction were greatest at the highest rate (1/10×) of either salt of dicamba applied alone or in combination with glyphosate, although injury observed at lower rates would be cause for concern after initial observation by sweetpotato producers. However, in some cases yield reduction of No.1 and marketable grades was observed following 1/250×, 1/100×, or 1/10× application rates of dicamba alone or with glyphosate when applied at storage root development.

The benefits of no-till fallow, which include reduced soil erosion, improved soil health, and increased stored soil water, are in jeopardy because of the widespread development of glyphosate resistance in Russian thistle. The objective of this research was to evaluate the efficacy of soil-active, residual herbicides for Russian thistle control in no-till fallow. The combinations of sulfentrazone + carfentrazone and flumioxazin + pyroxasulfone, and metribuzin alone were each applied in late fall, late winter, and split-applied in late fall and late winter at three sites: Adams, OR, in 2017–2018; Lind, WA, in 2018–2019; and Ralston, WA, in 2019–2020. All treatments provided good to excellent control of the initial flush of Russian thistle when assessed in mid-May, except the late-fall application of metribuzin at all three sites, and the late-fall application of sulfentrazone + carfentrazone at Adams. Cumulative Russian thistle densities, evaluated monthly throughout the fallow season, were lowest for the sulfentrazone + carfentrazone treatments, except for the late-fall application at Adams. However, flumioxazin + pyroxasulfone and metribuzin provided greater control of tumble mustard and prickly lettuce than did sulfentrazone + carfentazone. Sulfentrazone + carfentrazone, flumioxazin + pyroxasulfone, and metribuzin can all be used for Russian thistle control in fallow. To reduce the risk for crop injury to subsequently planted winter wheat, a late-fall application of sulfentrazone + carfentrazone may be the preferred treatment in low-rainfall regions where winter wheat–fallow is commonly practiced. A late-winter application may be preferred in higher rainfall regions where a 3-year rotation (e.g., winter wheat–spring wheat–fallow) is common. Flumioxazin + pyroxasulfone should be considered if other broadleaf weeds, such as tumble mustard or prickly lettuce, are of concern. The use of these soil-applied herbicides will reduce the need for the frequent application of glyphosate for Russian thistle control in no-till fallow.

Smallflower umbrella sedge is one of the most problematic weeds in direct-seeded rice in India. Bispyribac-sodium (acetolactate synthase [ALS]-inhibiting herbicide) is commonly used in rice, but growers have recently reported lack of smallflower umbrella sedge control with this herbicide. An extensive survey was carried out in two rice-growing states, Chhattisgarh and Kerala, where 53 putative bispyribac-sodium-resistant (BR) biotypes were collected. Studies were conducted to confirm resistance to bispyribac-sodium and to test the efficacy of the newly developed synthetic auxin herbicide florpyrauxifen-benzyl on putative BR biotypes. A whole-plant bioassay revealed that bispyribac-sodium is no longer effective. Of 53 putative BR biotypes, 17 biotypes survived the recommended label rate of 25 g ai ha−1. The effective bispyribac-sodium rate required to control 50% of the plants in most of the BR biotypes (ED50) ranged from 19 to 96 g ha−1, whereas it was 10 g ha−1 in a susceptible biotype. In two highly resistant biotypes, the ED50 was beyond the maximum tested rate, 200 g ha−1. This suggests 2- to >20-fold resistance in BR biotypes. An ALS enzyme activity assay suggests an altered target site as mechanism of resistance to bispyribac-sodium. This study confirms the first case of evolved resistance to bispyribac-sodium in smallflower umbrella sedge in India. However, the newly developed synthetic auxin florpyrauxifen-benzyl effectively controlled all BR biotypes at the field use rate of 31.25 g ai ha−1.

Four field experiments were completed in commercial corn fields during 2019 and 2020 to determine glyphosate-resistant (GR) horseweed control in corn with tiafenacil alone or in combination with bromoxynil, dicamba, or tolpyralate applied preplant (PP). Corn planted 1 to 10 d after herbicide application was not injured with any of the herbicides tested. GR horseweed interference reduced corn grain yield 32% when left uncontrolled. Herbicides reduced GR horseweed interference and resulted in corn grain yield that was similar to the weed-free control. Glyphosate (900 g ae ha−1) + tiafenacil at 12.5, 25, and 37.5 g ha−1 controlled GR horseweed 63%, 68%, and 72% at 4 wk after treatment (WAT) and decreased GR horseweed density 64%, 43%, and 83% and dry biomass 69%, 55%, and 83%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus bromoxynil (280 g ai ha−1) controlled GR horseweed 81%, 88%, and 87% at 4 WAT and reduced GR horseweed density 82%, 94%, and 93% and dry biomass 93%, 93%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus dicamba (300 g ai ha−1) controlled GR horseweed 86%, 88%, and 88% at 4 WAT and decreased GR horseweed density 76%, 89%, and 86% and dry biomass 94%, 98%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus tolpyralate (30 g ai ha−1) controlled GR horseweed 90%, 90%, and 91% at 4 WAT and decreased GR horseweed density 93%, 91%, and 95% and dry biomass 98%, 97%, and 97%, respectively. The industry standards in Ontario, glyphosate + dicamba/atrazine and glyphosate + saflufenacil/dimethenamid-p controlled GR horseweed 95% and 100% at 4, 8, and 12 WAT and caused 99% and 100% density or biomass reduction, respectively.

The use of photosystem II (PSII)-inhibitor and/or protoporphyrinogen oxidase (PPO)-inhibitor PRE herbicides in soybean may, under adverse environmental conditions, result in early season crop injury. A field study was conducted near Brule and North Platte, Nebraska, during the 2016 and 2017 growing seasons with the objective to evaluate the impact of PRE herbicides metribuzin (PSII-inhibitor) and sulfentrazone (PPO-inhibitor) on early season soybean development, final plant stand, and yield using 22 soybean varieties adapted to southwestern Nebraska. Herbicide treatments consisted of metribuzin (560 g ai ha−1) and sulfentrazone (280 g ai ha−1) applied within 3 d after planting and a nontreated control (NTC). Sulfentrazone reduced green canopy vegetation at the V2 growth stage by 22% and final plant stand at physiological maturity by 10% compared with the NTC. The number of pods per plant was 16% higher for sulfentrazone and the number of seeds per plant was 15% and 4% higher for sulfentrazone and metribuzin compared with the NTC, respectively. Sulfentrazone and metribuzin resulted in a slightly higher yield (3%) compared with the NTC, thus no yield reduction from PRE herbicides was observed in this study. These results support other findings that sulfentrazone and metribuzin have potential to cause early-season crop injury; however, when applied according to their label recommendations and following regional agronomic management practices, this impact may not translate into soybean yield reduction while such herbicides provide effective soil residual weed control.

In recent years, there has been increased use of dicamba due to the introduction of dicamba-resistant cotton and soybean in the United States. Therefore, there is a potential increase in off-target movement of dicamba and injury to sensitive crops. Flue-cured tobacco is extremely sensitive to auxin herbicides, particularly dicamba. In addition to yield loss, residue from drift or equipment contamination can have severe repercussions for the marketability of the crop. Studies were conducted in 2016, 2017, and 2018 in North Carolina to evaluate spray-tank cleanout efficiency of dicamba using various cleaning procedures. No difference in dicamba recovery was observed regardless of dicamba formulation and cleaning agent. Dicamba residue decreased with the number of rinses. There was no difference in dicamba residue recovered from the third rinse compared with residue from the tank after being refilled for subsequent tank use. Recovery ranged from 2% to 19% of the original concentration rate among the three rinses. Field studies were also conducted in 2018 to evaluate flue-cured tobacco response to reduced rates of dicamba ranging, from 1/5 to 1/10,000 of a labeled rate. Injury and yield reductions varied by environment and application timing. When exposed to 1/500 of a labeled rate at 7 and 11 wk after transplanting, tobacco injury ranged from 39% to 53% and 10% to 16% 24 days after application, respectively. The maximum yield reduction was 62%, with a 55% reduction in value when exposed to 112 g ha−1 of dicamba. Correlations showed significant relationships between crop injury assessment and yield and value reductions, with Pearson values ranging from 0.24 to 0.63. These data can provide guidance to growers and stakeholders and emphasize the need for diligent stewardship when using dicamba technology.

Hairy fleabane and horseweed are pervasive weed species in agriculture. Glyphosate-resistant (GR) and glyphosate/paraquat–resistant (GPR) biotypes challenge current management strategies. These GR and GPR biotypes have non–target site resistance, which can confer resistance to herbicides with different sites of action (SOAs). This study’s objective was to characterize the response of GR, GPR, and glyphosate/paraquat–susceptible (GPS) biotypes of both weed species to herbicides with a different SOA. Whole-plant dose–response bioassays indicated a similar response among tested biotypes of both weed species to rimsulfuron, dicamba, hexazinone, glufosinate, flumioxazin, saflufenacil, or mesotrione. The hairy fleabane GR and GPR biotypes were 2.7- and 2.9-fold resistant to 2,4-D relative to the GPS biotype (GR50 766.7 g ai ha–1), confirming 2,4-D resistance in hairy fleabane for the first time in California. The GR and GPR biotypes were not cross-resistant to dicamba. No differences in response to 2,4-D were observed among horseweed biotypes with a GR50 ranging from 150.2 to 277.4 g ai ha–1. The GPR biotypes of both species were cross-resistant to diquat, with a 44.0-fold resistance in hairy fleabane (GR50 863.7 g ai ha–1) and 15.6-fold resistance in horseweed (GR50 563.1 g ai ha–1). The confirmation of multiple resistances to glyphosate, paraquat, and 2,4-D in hairy fleabane curtails herbicide SOA alternatives and jeopardizes resistance management strategies based on herbicide rotation and tank mixtures, underscoring the critical need for nonchemical weed control alternatives.

Foothill deathcamas is a bulbous, perennial, native forb found throughout the western United States. Deathcamas begins growth early in the spring. The lack of alternative forages at this time can result in livestock becoming poisoned from the consumption of deathcamas. Research on herbicides for deathcamas control is limited to work from the 1950s and 1960s that identified 2,4-D as a control agent. The objective of this study was to evaluate alternative herbicide options for deathcamas control that include 2,4-D, 2,4-D + triclopyr, quinclorac, aminopyralid, imazapic, and chlorsulfuron. We also investigated the impact of plant growth stage on deathcamas control by making herbicide applications at two growth stages. One set of plots was treated with herbicides when deathcamas was in the early vegetative stage and the second set was treated at flowering. There is some evidence that stress might affect alkaloid content; therefore, we monitored alkaloid content of treated and nontreated deathcamas. Plots were established at Mt. Sterling, UT, and Mt. Pleasant, UT. Deathcamas density was reduced in 2,4-D, 2,4-D + triclopyr, and imazapic treatments 1 and 2 yr after herbicide application (P < 0.0001). Compared with the pretreatment densities, deathcamas densities(± standard error of the mean) 2 yr after herbicide application were reduced 96% ± 1.4%, 100% ± 0%, and 98% ± 0.9% for 2,4-D, 2,4-D + triclopyr, and imazapic, respectively, at the Mt. Sterling site. At the Mt. Pleasant site, deathcamas density was reduced by 84% ± 2.8% with 2,4-D alone, whereas 2,4-D + triclopyr and imazapic provided similar density reductions as observed at the Mt. Sterling site. Steroidal alkaloid concentrations did not change in herbicide-treated deathcamas at either stage of plant growth. These data indicate that 2,4-D, 2,4-D + triclopyr, and imazapic can effectively control deathcamas in the vegetative and flowering growth stages.

Conservation tillage adoption continues to be threatened by glyphosate and acetolactate synthase–resistant Palmer amaranth and other troublesome weeds. Field experiments were conducted from autumn 2010 through crop harvest in 2013 at two locations in Alabama to evaluate the effect of integrated management practices on weed control and seed cotton yield in glyphosate-resistant cotton. The effects of a cereal rye cover crop using high- or low-biomass residue, followed by wide or narrow within-row strip tillage and three PRE herbicide regimens were evaluated. The three PRE regimens were (1) pendimethalin at 0.84 kg ae ha−1 plus fomesafen at 0.28 kg ai ha−1 applied broadcast, (2) pendimethalin plus fomesafen applied banded on the row, or (3) no PRE. Each PRE treatment was followed by (fb) glyphosate (1.12 kg ae ha−1) applied POST fb layby applications of diuron (1.12 kg ai ha−1) plus monosodium methanearsonate (2.24 kg ai ha−1). Low-residue plots ranged in biomass from 85 to 464 kg ha−1, and high-biomass residue plots ranged from 3,119 to 6,929 kg ha−1. In most comparisons, surface disturbance width, residue amount, and soil-applied herbicide placement did not influence within-row weed control; however, broadcast PRE resulted in increased carpetweed, large crabgrass, Palmer amaranth, tall morning-glory, and yellow nutsedge weed control in row middles compared with plots receiving banded PRE. In addition, high-residue plots had increased carpetweed, common purslane, large crabgrass, Palmer amaranth, sicklepod, and tall morning-glory weed control between rows. Use of banded PRE herbicides resulted in equivalent yield and revenue in four of six comparisons compared with those with broadcast PRE herbicide application; however, this would likely result in many between-row weed escapes. Thus, conservation tillage cotton would benefit from broadcast soil-applied herbicide applications regardless of residue amount and tillage width when infested with Palmer amaranth and other troublesome weed species.

Numerous perennial horticultural crops are grown across the southeastern United States. Blueberry and blackberry (also known as caneberry) are commonly found in roadside stands, promote agritourism via pick-your-own markets, are important for fresh market commercial production in the region, and when processed, provide desirable value added products. Season-long weed control using residual herbicides is crucial for these perennial fruit crops to maximize berry quality and yield. Studies performed from 2012 to 2014 in Lanier and Clinch counties in Georgia evaluated the effects of repeated applications of indaziflam at 35, 75, or 145 g ai ha−1 applied biannually in March and September (five total applications) on growth of ‘Alapaha’ rabbiteye and ‘Palmetto’ highbush blueberry, and ‘Apache’ thornless blackberry. All indaziflam treatments were mixed with glufosinate, and a glufosinate-only treatment was included as a check. Minor leaf chlorosis (<10%) was noted within 30 d after application for all blueberries for all treatments, but this was always transient. Blueberry stem diameter was not different for any treatment, even when indaziflam was applied up to 725 g ai ha−1 over 3 yr as compared to glufosinate alone. There was no chlorosis or stem diameter differences for blackberry noted for any treatment. Indaziflam applied in blueberry and blackberry production provides season-long control of numerous troublesome weed species, without causing injury or negatively impacting crop growth.

Sulfentrazone was recently granted food-use tolerance approval for use on Brassica head and stem, as well as Brassica leafy vegetables. To date, one sulfentrazone registrant has listed those crops on its use label. In coastal California multiple crops per year including Brassica vegetables are grown in rapid succession; therefore, to avoid injury to rotational crops, herbicides used in those fields must be carefully selected. Given concerns about the relatively long soil persistence of sulfentrazone, studies were conducted to measure the response of direct-seeded carrot, lettuce, onion, spinach, and seeded tomato planted 3, 6, 9, and 12 mo after sulfentrazone application at 0, 112, 224, and 336 g ai ha−1. Eight plant-back studies were conducted during 2010–11 and 2012–13. Data collected were injury estimates, and stand and dry weights. Results indicate that it is safe to plant carrot and tomato 3 mo after sulfentrazone application at rates up to 336 g ai ha−1. Lettuce and green onion should not be planted within 9 mo of sulfentrazone application. Spinach should not be planted within 12 mo of sulfentrazone application.

Since the release of dicamba-tolerant cotton in 2016, preplant and POST applications of dicamba to control glyphosate-resistant Palmer amaranth have increased. With the increase in area treated with dicamba, the risk of off-target movement to nontarget crops has increased. A field study was conducted at the Texas Tech University New Deal Research Farm equipped with subsurface drip irrigation in 2017 and 2018 to evaluate non-dicamba tolerant cotton response to dicamba when applied at four crop growth stages [first square (FS) + 2 wk, first bloom (FB), FB + 2 wk, and FB + 5 wk]. Dicamba at 0.56 (1×), 0.056 (1/10×), 0.0112 (1/50×), 0.0056 (1/100×), and 0.00112 (1/500×) kg ae ha−1 was applied to ‘FM 1830GLT’ cotton. When applications were made at FS + 2 wk, a shift in boll nodal position was apparent following dicamba at the 1/50× rate in 2017 and at 1/10× in 2018 compared to the nontreated control (NTC). A shift in boll distribution from the 1/50× rate of dicamba was apparent at FB in 2017, but not in 2018. Dicamba applied at the 1× rate at FB + 2 wk resulted in reduced boll numbers. No change in boll number or boll position was apparent following any dicamba rate when applied at FB + 5 wk in both years. Dicamba applied at 1/500×, 1/100×, and 1/50× rates at all timings did not affect yield relative to the NTC. When dicamba was applied at the 1/10× rate, the greatest yield loss was observed at FS + 2 wk followed by FB and FB + 2 wk. Micronaire increased following dicamba applied at 1/10× at FS + 2 wk, FB, and FB + 2 wk in 2017. In 2018, micronaire decreased following dicamba applied at 1/10× at FB + 5 wk.

Three herbicide premixes have recently been introduced for weed control in wheat: halauxifen + florasulam, thifensulfuron + fluroxypyr, and bromoxynil + bicyclopyrone. The objective of this study was to evaluate these herbicides along with older products for their control of small-seeded false flax in winter wheat in Oklahoma. Studies took place during the 2017, 2018, and 2020 winter wheat growing seasons. Weed control was visually estimated every 2 wk throughout the growing season, and wheat yield was collected in all 3 yr. Small-seeded false flax diameter was approximately 6 cm at the time of application in all years. Control ranged from 96% to 99% following all treatments with the exception of bicyclopyrone + bromoxynil and dicamba alone, which controlled false flax 90%. All treatments containing an acetolactate synthase (ALS)–inhibiting herbicide achieved adequate control; therefore, resistance is not suspected in this population. Halauxifen + florasulam and thifensulfuron + fluroxypyr effectively controlled small-seeded false flax similarly to other standards recommended for broadleaf weed control in wheat in Oklahoma. Rotational use of these products allows producers flexibility in controlling small-seeded false flax and reduces the potential for development of herbicide resistance in this species.

Introduction and rapid adoption of dicamba-resistant (DR) soybean led to an increase of postemergent applications of dicamba. This resulted in a widespread increase in nontarget dicamba injury to non-DR soybean in 2017. Field studies were conducted in Manhattan, KS, in 2018 and 2019 and in Ottawa, KS, in 2019 to investigate the injury and yield response of soybean varieties with varying herbicide-resistance traits and maturity groups when exposed to dicamba. Four varieties were tested: ‘Credenz 3841LL’ (glufosinate resistant), ‘Credenz 4748LL’ (glufosinate resistant), ‘Asgrow AG4135RR2Y’ (glyphosate resistant), and ‘Stine 40BA02’ (glyphosate and isoxaflutole resistant), abbreviated as CR3841, CR4748, AG4135, and ST40B, respectively. Soybeans were treated with 5.6 g ae ha−1 of dicamba at V3 and R1 stages. Percent soybean injury, soybean height, soybean yield and yield components, and injury to offspring were evaluated. Four weeks after treatment (WAT) at V3, the greatest injury was observed in AG4135 and ST40B. Dicamba application at R1 resulted in the greatest injury to ST40B both 4 WAT and at senescence. Minimal injury was observed in all varieties treated at V3 at senescence and yield loss was 5% or less. Dicamba application at R1 resulted in 19 to 34% yield loss, with the least yield loss in CR4748, and the greatest in ST40B. Varieties with greater injury at senescence generally yielded less than other varieties.

Striking a balance between the weed control capacity of living mulches and their competition with the main crop is complex. At rates that avoid severe injury to living mulch, herbicides may reduce their vigor while simultaneously contributing to weed control. In a 2-yr field study carried out in Freeville, NY, we evaluated the effects of various combinations consisting of two herbicides, applied sequentially at reduced rates, on the growth of a sunn hemp living mulch and weeds (including common lambsquarters, common purslane, hairy galinsoga, and Powell amaranth). When a herbicide with primarily POST activity (Type 1; e.g., rimsulfuron, 0.005 to 0.007 kg ai ha−1) was applied first, performance of sunn hemp (1700 to 3900 kg ha−1 dry biomass; 10% to 88% groundcover) was poor and weed growth (25% to 62% groundcover) was high, likely because sunn hemp was severely injured at a young growth stage and was outcompeted by weeds. A follow-up application (approximately 2 wk later) of a herbicide with primarily PRE and residual activities (Type 2; e.g., metribuzin, 0.05 to 0.15 kg ai ha−1), with a surfactant to enhance its POST activity, had little effect on established weeds. However, because sunn hemp was already 20 cm tall at weed emergence, applying a Type 2 herbicide first did not cause severe injury to sunn hemp and reduced weed pressure, thereby also enhancing sunn hemp performance (3,800 to 6,100 kg ha−1 dry biomass; 85% to 94% groundcover). Moreover, the follow-up application of a Type 1 herbicide affected the smaller weeds more (4% to 21% groundcover) than the better-established sunn hemp. Our results demonstrate that an appropriate sequence of herbicides at reduced rates may be important to control weeds while maintaining a healthy living mulch stand.

Yield losses due to weeds are a major threat to wheat production and economic well-being of farmers in the United States and Canada. The objective of this Weed Science Society of America (WSSA) Weed Loss Committee report is to provide estimates of wheat yield and economic losses due to weeds. Weed scientists provided both weedy (best management practices but no weed control practices) and weed-free (best management practices providing >90% weed control) average yield from replicated research trials in both winter and spring wheat from 2007 to 2017. Winter wheat yield loss estimates ranged from 2.9% to 34.4%, with a weighted average (by production) of 25.6% for the United States, 2.9% for Canada, and 23.4% combined. Based on these yield loss estimates and total production, the potential winter wheat loss due to weeds is 10.5, 0.09, and 10.5 billion kg with a potential loss in value of US$2.19, US$0.19, and US$2.19 billion for the United States, Canada, and combined, respectively. Spring wheat yield loss estimates ranged from 7.9% to 47.0%, with a weighted average (by production) of 33.2% for the United States, 8.0% for Canada, and 19.5% combined. Based on this yield loss estimate and total production, the potential spring wheat loss is 4.8, 1.6, and 6.6 billion kg with a potential loss in value of US$1.14, US$0.37, and US$1.39 billion for the United States, Canada, and combined, respectively. Yield loss in this analysis is greater than some previous estimates, likely indicating an increasing threat from weeds. Climate is affecting yield loss in winter wheat in the Pacific Northwest, with percent yield loss being highest in wheat-fallow systems that receive less than 30 cm of annual precipitation. Continued investment in weed science research for wheat is critical for continued yield protection.

Integrated strategies for management of glyphosate-resistant (GR) horseweed are needed to reduce reliance on herbicides. Planting a cover crop after corn or soybean harvest in the Upper Midwest may reduce horseweed establishment and growth. Experiments were conducted in Michigan to determine if cereal rye and winter wheat, seeded at 67 or 135 kg ha−1, and terminated with glyphosate at 1.27 kg ae ha−1 1 wk before planting (early termination) or 1 wk after soybean planting (planting green) would suppress establishment and growth of GR horseweed. Cover-crop biomass was 212% to 272% higher when termination was delayed by planting green compared with early termination. At the time of termination, cover crops reduced GR horseweed biomass 41% to 89% compared with no cover. Planting green increased the C:N ratio of cover-crop residue, which improved residue persistence and GR horseweed suppression at the time of POST herbicide application, approximately 5 wk after planting. Planting green reduced GR horseweed biomass 46% to 93% compared with no cover at the time of POST herbicide application; early termination provided less consistent suppression. Cover crops alone did not suppress GR horseweed through soybean harvest. Soybean yield was 30% to 108% greater when planting green compared with early termination at 2 site-years. Cereal rye and winter wheat, seeded at 67 or 135 kg ha−1, provided early-season GR horseweed suppression. Results from this research indicate that the practice of planting green may improve GR horseweed suppression through the time of POST herbicide application.

The invasion of waterhemp into northern sugarbeet growing regions has prompted producers to re-integrate inter-row cultivation into weed management programs, as no currently registered herbicides can control glyphosate-resistant waterhemp POST in crop. Inter-row cultivation was a common weed control practice in sugarbeet until the release of glyphosate-resistant sugarbeet cultivars in 2008 made the use of inter-row cultivation unnecessary. In the late 2010s, producers began again to use inter-row cultivation to remove weeds that glyphosate did not control, but producers need information on the effectiveness and safety of inter-row cultivation when used with soil-residual herbicide programs. Efficacy and tolerance field experiments were conducted in Minnesota and North Dakota from 2017 to 2019. Results from the efficacy experiment demonstrated that cultivation improved waterhemp control 11% and 12%, 14 and 28 d after treatment, respectively. Waterhemp response to cultivation was dependent on crop canopy and precipitation after cultivation. Cultivation had minimal effect on waterhemp density in three environments, but at one environment, near Galchutt, ND in 2019, waterhemp density increased 600% and 196%, 14 and 28 d after treatment, respectively. Climate data indicated that in 2019 Galchutt, ND received 105 mm of precipitation in the 14 d following cultivation and had an open crop canopy that probably contributed to further weed emergence. Results from the tolerance experiment demonstrated that root yield and recoverable sucrose were not affected by cultivation timing or number of cultivations. In one environment, cultivating reduced sucrose content by 0.8% regardless of date or cultivation number, but no differences were found in four environments. Damage/destruction of leaf tissue from in-season cultivation is probably responsible for the reduction in sucrose content. Results indicate that cultivation can be a valuable tool to control weeds that herbicide cannot, but excessive rainfall and open crop canopy following cultivation can create an environment conducive to further weed emergence.