Although Palmer amaranth is currently not widespread in most dry edible bean−producing states in the United States, it is widespread in western Nebraska, a major dry edible bean−producing region. There is currently a lack of research on management and biology of Palmer amaranth within dry edible bean production. The objective of this study was to quantify the impact of season-long Palmer amaranth interference on yield of dry edible bean and seed production of Palmer amaranth. A field study was conducted in Scottsbluff, NE, in 2020 and 2021. Palmer amaranth interference at densities of 0, 0.2, 0.3, 0.5, 1, and 2 plants m−1 row of dry edible bean was evaluated. Palmer amaranth interference reduced dry edible bean yield by 77% at a weed density of 2 plants m−1 row compared to the weed-free control, and a 5% yield reduction threshold was estimated to occur at a Palmer amaranth density of 0.02 plants m−1 row. Yield reduction occurred primarily through a reduction in the number of pods per plant as Palmer amaranth density increased. Palmer amaranth plants produced 91,000 to 376,000 seeds per plant depending on densities, and as many as 140,000 seeds m−2. Study results will help farmers and other stakeholders estimate Palmer amaranth interference within their fields, and may help justify the economic cost of incorporating additional Palmer amaranth management practices.

The ability to use the protoporphyrinogen oxidase (PPO)-inhibiting herbicides fomesafen, flumioxazin, and sulfentrazone in potato is limited regionally or by soil texture, largely because of crop injury noted in research in the 1990s. With that in mind, we evaluated whether reducing the herbicide rates could maintain weed control while providing more consistent crop safety. Studies were conducted on a silt loam and a coarse-textured loamy sand soil. Soil texture played a greater than anticipated role in PPO-inhibitor herbicide injury risk as it relates to high-precipitation events. For example, in 2020 at the silt loam location, there were five precipitation events across the season that exceeded 2.5 cm, including one 6 d after treatment (DAT), and a seasonal total precipitation that was over 10 cm greater than the previous year. Despite excessive moisture and initial potato injury as high as 27% where flumioxazin was applied at the high rate with S-metolachlor, by 29 DAT injury was less than 10% in all treatments, and marketable tuber yield was similar among treatments. In contrast, in 2020 at the loamy sand location, there were four precipitation events across the season that exceeded 2.5 cm, and potato injury was as much as 60%. In 2020 the high amount of injury from flumioxazin was hypothesized to be caused by precipitation before herbicide application and not after, suggesting a need for more research in this area. This work documents the fine line between yield reduction presumably caused by reduced weed control and yield reduction assumed to be related to herbicide injury. This delineation between adequate weed control and consistent crop safety may differ by soil texture and environmental conditions, supporting the notion that custom-tailored weed management may become more necessary as high-precipitation events become more common in upper midwestern U.S. agricultural systems.

Italian ryegrass has become a problematic weed in hazelnut orchards of Oregon because of the presence of herbicide-resistant populations. Resistant and multiple-resistant Italian ryegrass populations are now the predominant biotypes in Oregon; there is no information on which herbicides effectively control Italian ryegrass in hazelnut orchards. Six field studies were conducted in commercial orchards to evaluate Italian ryegrass control with POST herbicides. Treatments included flazasulfuron, glufosinate, glyphosate, paraquat, rimsulfuron, and sethoxydim applied alone or in selected mixtures during early spring when plants were in the vegetative stage. Treatment efficacy was dependent on the experimental site. The observed range of weed control 28 d after treatment was 13% to 76% for glyphosate, 1% to 72% for paraquat, 58% to 88% for glufosinate, 16% to 97% for flazasulfuron, 8% to 94% for rimsulfuron, and 25% to 91% for sethoxydim. Herbicides in mixtures improved control of Italian ryegrass compared to single active ingredients based on contrast analysis. Herbicides in mixture increased control by 27% compared to glyphosate, 18% to rimsulfuron, 15% to flazasulfuron, 19% to sethoxydim, and 12% compared to glufosinate when averaged across all sites, but mixture did not always improve reduction of ground coverage or of biomass. This complex site-specific response highlights the importance of record-keeping for efficient herbicide use. Glufosinate is an effective option to manage Italian ryegrass. However, the glufosinate-resistant biotypes documented in Oregon may jeopardize this practice. Nonchemical weed control options are needed for sustainable weed management in hazelnuts.

Glyphosate-resistant (GR) horseweed was first confirmed in Ontario in 2010. GR horseweed interference can reduce soybean yield by up to 97%. Bromoxynil is a photosystem II–inhibiting herbicide that is primarily used for annual broadleaf weed control in monocot crops. The objective of this study was to determine the biologically effective dose (BED) of bromoxynil applied alone and when mixed with metribuzin applied preplant for control of GR horseweed in soybean in Ontario. Five field experiments were conducted over a 2-yr period (2019–2020) to determine the predicted dose of bromoxynil with or without metribuzin that would control GR horseweed 50%, 80%, and 95%. No soybean injury was observed. The predicted doses of bromoxynil to achieve 50% and 80% control of GR horseweed were 98 and 277 g ai ha−1, respectively, at 8 wk after application (WAA). When mixed with metribuzin (400 g ai ha−1), the predicted doses of bromoxynil for 50%, 80%, and 95% control of GR horseweed were 10, 25, and 54 g ai ha−1, respectively. Bromoxynil (280 g ai ha−1) plus metribuzin (400 g ai ha−1) controlled GR horseweed 97%, a finding that was similar to the industry standards of saflufenacil + metribuzin (99% control) and glyphosate/dicamba + saflufenacil (100% control) at 8 WAA. This study concludes that bromoxynil + metribuzin applied before planting provides excellent control of GR horseweed in soybean.

Trifludimoxazin, a new protoporphyrinogen oxidase–inhibiting herbicide, is being evaluated for possible use as a soil-residual active herbicide treatment in cotton for control of small-seeded annual broadleaf weeds. Laboratory and greenhouse studies were conducted to compare vertical mobility and cotton tolerance of trifludimoxazin to flumioxazin and saflufenacil, which are two currently registered protoporphyrinogen oxidase–inhibiting herbicides for use in cotton, in three West Texas soils. Vertical soil mobility of trifludimoxazin was similar to flumioxazin in Acuff loam and Olton loam soils, but was more mobile than flumioxazin in the Amarillo loamy sand soil. The depth of trifludimoxazin movement after a 2.5-cm irrigation event ranged from 2.5 to 5.0 cm in all soils, which would not allow for crop selectivity based on herbicide placement, because ideal cotton seeding depth is from 0.6 to 2.54 cm deep. Greenhouse studies indicated that PRE treatments were more injurious than the 14 d preplant treatment when summarized across soils for the three herbicides (43% and 14% injury, respectively). No differences in visual cotton response or dry weight was observed after trifludimoxazin preplant as compared with the nontreated control within each of the three West Texas soils and was similar to the flumioxazin preplant across soils. On the basis of these results, a use pattern for trifludimoxazin in cotton may be established with the use of a more than 14-d preplant restriction before cotton planting.

Common teasel is a troublesome invasive weed in North and South America. Additional information on the efficacy of herbicide application and mowing at different growth stages will help in common teasel management. First, an outdoor pot experiment was performed to assess the effects of increasing application rates and combinations of glyphosate and 2,4-D amine when applied at the 4-leaf, rosette, and bolting stages. Second, field experiments were performed to evaluate the impact of time of cutting on invasive common teasel height, head number, and head length. Finally, germinability of seeds collected from naturally growing plants was determined to evaluate the feasibility of mowing invasive common teasel after flowering. Only glyphosate applied at 1.08 kg ae ha−1 at the 4-leaf stage provided adequate control (>90%). Although control was not satisfactory (<90%) when applying glyphosate at 2.16 kg ae ha−1 at the rosette and bolting stages, and 2,4-D at 1.75 kg ai ha−1 at 4-leaf stage, significant injury and biomass decline were observed. Glyphosate and 2,4-D combinations did not improve common teasel control compared with single applications of each. Cutting rosettes strongly reduced inflorescence production (34%–49%) and cutting flowering plants prevented total regrowth. Germination of seeds averaged 14% when harvested 10 d after flowering, and maximum seed germination (>90%) occurred 30 d after flowering. Glyphosate applied alone at the recommended commercial rate early in the growing season, together with cutting at the flowering stage, may be the most beneficial way of controlling invasive common teasel.

A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.

Annual grass weeds reduce profits of wheat farmers in the Pacific Northwest. The very-long-chain fatty acid elongase (VLCFA)-inhibiting herbicides S-metolachlor and dimethenamid-P could expand options for control of annual grasses but are not registered in wheat, because of crop injury. We evaluated a safener, fluxofenim, applied to wheat seed for protection of 19 soft white winter wheat varieties from S-metolachlor, dimethenamid-P, and pyroxasulfone herbicides; investigated the response of six varieties (UI Sparrow, LWW 15-72223, UI Magic CL+, Brundage 96, UI Castle CL+, and UI Palouse CL+) to incremental doses of fluxofenim; established the fluxofenim dose required to optimally protect the varieties from VLCFA-inhibiting herbicides; and assessed the impact of fluxofenim dose on glutathione S-transferase (GST) activity in three wheat varieties (UI Sparrow, Brundage 96, and UI Castle CL+). Fluxofenim increased the biomass of four varieties treated with S-metolachlor or dimethenamid-P herbicides and one variety treated with pyroxasulfone. Three varieties showed tolerance to the herbicides regardless of the fluxofenim treatment. Estimated fluxofenim doses resulting in 10% biomass reduction of wheat ranged from 0.55 to 1.23 g ai kg−1 seed. Fluxofenim doses resulting in 90% increased biomass after treatment with S-metolachlor, dimethenamid-P, and pyroxasulfone ranged from 0.07 to 0.55, 0.09 to 0.73, and 0.30 to 1.03 g ai kg−1 seed, respectively. Fluxofenim at 0.36 g ai kg−1 seed increased GST activity in UI Castle CL+, UI Sparrow, and Brundage 96 by 58%, 30%, and 38%, respectively. These results suggest fluxofenim would not damage wheat seedlings up to three times the rate labeled for sorghum, and fluxofenim protects soft white winter wheat varieties from S-metolachlor, dimethenamid-P, or pyroxasulfone injury at the herbicide rates evaluated.

BASF Corp. has developed p-hydroxyphenylpyruvate dioxygenase (HPPD) inhibitor–resistant cotton and soybean that will allow growers to use isoxaflutole in future weed management programs. In 2019 and 2020, a multi-state non-crop research project was conducted to examine weed control following isoxaflutole applied preemergence alone and with several tank-mix partners at high and low labeled rates. At 28 d after treatment (DAT), Palmer amaranth was controlled ≥95% at six of seven locations with isoxaflutole plus the high rate of diuron or fluridone. These same combinations provided the greatest control 42 DAT at four of seven locations. Where large crabgrass was present, isoxaflutole plus the high rate of diuron, fluridone, pendimethalin, or S-metolachlor or isoxaflutole plus the low rate of fluometuron controlled large crabgrass ≥95% in two of three locations 28 DAT. In two of three locations, isoxaflutole plus the high rate of pendimethalin or S-metolachlor improved large crabgrass control 42 DAT when compared to isoxaflutole alone. At 21 DAT, morningglory was controlled ≥95% at all locations with isoxaflutole plus the high rate of diuron and at three of four locations with isoxaflutole plus the high rate of fluometuron. At 42 DAT at all locations, isoxaflutole plus diuron or fluridone and isoxaflutole plus the high rate of fluometuron improved morningglory control compared to isoxaflutole alone. These results suggest that isoxaflutole applied preemergence alone or in tank mixture is efficacious on a number of cross-spectrum annual weeds in cotton, and extended weed control may be achieved when isoxaflutole is tank-mixed with several soil-residual herbicides.

Weeds are managed in Florida strawberry production systems with plastic mulches, fumigants, and herbicides. There are limited post-transplant options to control weeds that emerge in the planting holes in the plastic-covered beds, but flumioxazin at 107 g ai ha−1 can be applied pretransplant under the plastic mulch to control broadleaf and grass weeds. Three research trials were conducted in Balm and Dover, FL, in 2017 and 2018 to evaluate tolerance of the strawberry cultivar ‘Radiance’ to flumioxazin rates ranging from 54 to 6,854 g ha−1 and to estimate herbicide persistence under the plastic mulch. Shoot damage was observed at 428 to 857 g ha−1 (4× and 8× the label rate, respectively), but a significant increase in the number of dead plants was not observed until the treatment rate was 857 g ha−1 at one site and 3,427 g ha−1 at a second site (8× and 32× the label rate, respectively). Berry yields were unaffected by rates lower than 857 g ha−1. Flumioxazin persisted throughout the growing season (approximately 150 d) with no reduction in soil concentration. We conclude that applied at the label rate, flumioxazin is a safe pretransplant weed management option for season-long weed control in strawberry with no yield reduction at rates below 8× the label rate. Caution is recommended for growers who plant a second crop on the same bed.

Tiafenacil is a recently developed protoporphyrinogen IX oxidase (PPO)-inhibiting herbicide from the pyrimidinedione chemical class that is proposed for use as a preplant (PP) burndown in soybean. Glyphosate-resistant (GR) horseweed is a troublesome weed often found in no-till systems that can dramatically reduce soybean yield; control in soybean has been variable. Five field experiments were conducted over 2019 and 2020 in commercial soybean fields with GR horseweed to determine the biologically effective dose (BED) of tiafenacil and tiafenacil + metribuzin and to compare their efficacy to currently accepted industry standard herbicide treatments in identity-preserved (IP, non-GMO), GR, and glyphosate/dicamba-resistant (GDR) soybean systems. There was no soybean injury with treatments evaluated. The calculated doses of tiafenacil for 50%, 80%, and 95% control of GR horseweed control were 21, 147, and >200 g ai ha−1, respectively, at 8 wk after application (WAA). Lower doses were calculated with the addition of metribuzin (400 g ai ha−1) to tiafenacil for 50% and 80% control, with no dose of tiafenacil + metribuzin providing 95% control. Tiafenacil + metribuzin at 25 + 400 and 50 + 400 g ai ha−1 controlled GR horseweed 88% and 93%, respectively, which was similar to the industry standards of saflufenacil + metribuzin (25 + 400 g ai ha−1) and glyphosate/dicamba + saflufenacil (1,200/600 + 25 g ai ha−1) that provided 98% and 100% control, respectively, at 8 WAA. This study presents the potential utility of tiafenacil + metribuzin as a GR horseweed management strategy in soybean.

Hairy buttercup and cutleaf evening primrose are winter annual weeds that have become more problematic for winter wheat growers in the southern Great Plains and the midsouthern United States in recent years. Little research exists on which to base recommendations for controlling hairy buttercup in wheat, and little research has been published on cutleaf evening primrose control in recent years. With growing concerns of increased herbicide resistance among winter annual weeds, incorporating new herbicide sites of action has become necessary. The objective of this study was to assess halauxifen-methyl as a novel herbicide to control these two problematic winter annual broadleaf weeds in winter wheat in Mississippi and Oklahoma. Studies were conducted across four site-years in Mississippi and one site-year in Oklahoma comparing 15 herbicide programs with and without halauxifen-methyl. Hairy buttercup and cutleaf evening-primrose control was the greatest when a synthetic auxin was combined with an acetolactate synthase–inhibiting herbicide. Treatments including halauxifen-methyl resulted in the greatest control of hairy buttercup, whereas a synthetic auxin herbicide plus chlorsulfuron and metsulfuron resulted in the greatest control of cutleaf evening primrose. Halauxifen-methyl is an effective addition for control of winter annual broadleaf weeds like hairy buttercup and cutleaf evening primrose in winter wheat.

Hair fescue is a common tuft-forming perennial grass weed that reduces yields and hinders mechanical harvest in lowbush blueberry fields. PRE terbacil applications traditionally controlled hair fescue but currently only provide suppression in most fields. Terbacil use has not, however, been evaluated in conjunction with other currently registered herbicides in lowbush blueberry. The objective of this research was to evaluate a range of terbacil-based herbicide treatments for hair fescue management in lowbush blueberry. The experiment was conducted at three lowbush blueberry fields in Nova Scotia, Canada. Spring nonbearing-year terbacil applications (2,000 g ai ha–1) exhibited variable efficacy on hair fescue with reduced total tuft density at one site and reduced flowering-tuft density and flowering-tuft inflorescence number at two sites. Suppression was limited to the year of application only. Terbacil followed by (fb) foramsulfuron (35 g ai ha–1) did not improve suppression. A terbacil tank mixture with glufosinate (750 ai ha–1), however, reduced flowering-tuft density and flowering-tuft inflorescence number at each site and reduced total tuft density at one site, suggesting improved suppression with terbacil + glufosinate relative to terbacil alone. Terbacil + glufosinate fb foramsulfuron gave additional reductions in total tuft density at two sites and reduced bearing-year flowering-tuft density at two sites, indicating that hair fescue suppression with this herbicide combination extends into the bearing year. Although less effective than the industry standard pronamide applications, terbacil + glufosinate or terbacil + glufosinate fb foramsulfuron could be used as part of a weed management program for hair fescue in lowbush blueberry.

Tolpyralate is a new 4-hydroxyphenyl-pyruvate dioxygenase (HPPD)–inhibiting herbicide for weed control in corn. Previous research has reported efficacy of tolpyralate + atrazine on several annual grass and broadleaf weed species; however, no studies have evaluated weed control of tolpyralate + atrazine depending on time-of-day (TOD) of application. Six field experiments were conducted over a 2-yr period (2018, 2019) near Ridgetown, ON, to determine if there is an effect of TOD of application on tolpyralate + atrazine efficacy on common annual grass and broadleaf weeds. An application was made at 3-h intervals beginning at 06:00 h with the last application at 24:00 h. There was a slight TOD effect on velvetleaf, pigweed species, and common ragweed control with tolpyralate + atrazine; however, the magnitude of change throughout the day was ≤3% at 2, 4, or 8 wk after application (WAA). There was no effect of TOD of tolpyralate + atrazine on the control of lambsquarters, barnyardgrass, and green foxtail. All weed species were controlled ≥88% at 8 WAA. There was no effect of TOD of tolpyralate + atrazine application on corn yield. Results of this study show no evidence of a TOD effect on weed control efficacy with tolpyralate + atrazine.

Resistance to penoxsulam among barnyardgrass populations is prevalent in rice fields in China. Seeds of penoxsulam-resistant (AXXZ-2) and penoxsulam-susceptible (JLGY-3) barnyardgrass populations, as well as the seeds of two rice varieties, including Wuyungeng32 (WY) and Liangyou669 (LY), were planted in plastic pots and then treated with a rate titration of acetochlor, anilofos, butachlor, clomazone, oxadiazon, pendimethalin, pretilachlor, pyraclonil, or thiobencarb. The two barnyardgrass populations exhibited similar susceptibility to acetochlor, anilofos, butachlor, oxadiazon, pretilachlor, or pyraclonil. However, the susceptibility differed between the barnyardgrass populations in response to clomazone, pendimethalin, and thiobencarb. For AXXZ-2, herbicide rates that caused 50% reduction in shoot biomass from the nontreated control (GR50) were 179, >800, and 1,798 g ha−1 for clomazone, pendimethalin, and thiobencarb, respectively; whereas JLGY-3 GR50 values were 61, 166, and 552 g ha−1, respectively. Both rice varieties demonstrated excellent tolerance to acetochlor, butachlor, oxadiazon, pretilachlor, and thiobencarb. However, substantial rice damage was observed when anilofos and clomazone were used. Anilofos at 352 g ha−1 and clomazone at 448 g ha−1 reduced rice shoot biomass by 41% and 50% from the nontreated, respectively. Averaged across herbicide rates, clomazone use resulted in a reduction in rice shoot biomass from that of the nontreated control by 52% and 34% for WY and LY, respectively; and pendimethalin use resulted in a reduction in rice shoot biomass from the nontreated control by 25% and 9% for WY and LY, respectively.

Glyphosate resistance in weed species has presented immense challenges for farmers in Ontario. The co-application of burndown plus residual herbicides provides control of glyphosate-resistant (GR) horseweed in soybean. Pyraflufen-ethyl/2,4-D is a premixed herbicide formulation sold under the tradename Blackhawk®. Five field experiments were conducted over a 2-yr period (2019, 2020) in fields in southwestern Ontario to ascertain the biologically effective dose of pyraflufen-ethyl/2,4-D, applied alone, or mixed with metribuzin, for GR horseweed control when applied preplant to soybean. Soybean visible injury for all treatments was <15%. At 8 wk after application (WAA), the calculated doses of pyraflufen-ethyl/2,4-D for 50%, 80%, and 95% control of GR horseweed were 390, 1,148, and >2,108 g ha−1, respectively. The addition of metribuzin to pyraflufen-ethyl/2,4-D reduced the doses of pyraflufen-ethyl/2,4-D for 50%, 80%, and 95% control of GR horseweed to 19, 46, and 201 g ha−1, respectively. Pyraflufen-ethyl/2,4-D + metribuzin controlled GR horseweed by 97%, which is comparable to the current industry standards. Based on these results, pyraflufen-ethyl/2,4-D + metribuzin (527 + 400 g ha−1) applied preplant can be used for GR horseweed control in soybean.

Horseweed and giant ragweed are competitive, annual weeds that can negatively impact crop yield. Biotypes of glyphosate-resistant (GR) giant ragweed and horseweed were first reported in 2008 and 2010 in Ontario, respectively. GR horseweed has spread throughout the southern portion of the province. The presence of GR biotypes poses new challenges for soybean producers in Canada and the United States. Halauxifen-methyl is a recently registered selective herbicide against broadleaf weeds for preplant use in corn and soybean. There is limited literature on the efficacy of halauxifen-methyl on GR horseweed and giant ragweed when combined with currently registered products in Canada. The purpose of this study was to determine the effectiveness of halauxifen-methyl applied alone and tank-mixed to control GR giant ragweed and GR horseweed in glyphosate and dicamba-resistant (GDR) soybean in southwestern Ontario. Six field experiments were conducted separately for each weed species over 2018 and 2019. Halauxifen-methyl applied alone offered 72% control of GR horseweed at 8 wk after application (WAA). Control was improved to >91% when halauxifen-methyl applied in combination with metribuzin, saflufenacil, chlorimuron-ethyl + metribuzin, and saflufenacil + metribuzin. At 8 WAA, halauxifen-methyl provided 11% control of GR giant ragweed, and 76% to 88% control when glyphosate/2,4-D choline, glyphosate/dicamba, glyphosate/2,4-D choline + halauxifen-methyl, and glyphosate/dicamba + halauxifen-methyl were used. We conclude that halauxifen-methyl applied preplant in a tank-mixture can provide effective control of GR giant ragweed and horseweed in GDR soybean.

Field studies were conducted in Alabama in 2016 and 2017 to determine the effect of postemergence applications of glufosinate alone and glufosinate applied with S-metolachlor, using two different nozzle types, on LibertyLink®, XtendFlex®, and WideStrike® cotton growth and yield. Two applications of glufosinate at 0.6 kg ha−1, and glufosinate with S-metolachlor at 1.39 kg ha−1 were applied to each cotton cultivar at the four-leaf and eight-leaf growth stages using a flatfan and Turbo TeeJet Induction® nozzle. Visual estimates of cotton injury were evaluated after each application, as well as yield. No differences in yield within each cotton cultivar were observed for either year. Visible injury was higher for WideStrike cotton than LibertyLink or XtendFlex cultivars. On average, glufosinate applied with S-metolachlor resulted in greater injury than glufosinate applied alone. In LibertyLink cotton, applications made with TTI nozzles resulted in greater injury than flatfan nozzles. However, cotton injury was transient and did not affect cotton yields. These data indicate that applications of glufosinate and glufosinate applied with S-metolachlor, at 0.6 kg ha−1 and 1.39 kg ha−1, respectively, with either a flatfan or TTI nozzle, can have no detrimental effect on cotton growth or yield.

Junglerice is becoming more prevalent in Tennessee, Arkansas, and Mississippi row crop fields. The evolution of glyphosate-resistant (GR) junglerice populations is one reason for the increase. Another possible explanation is that glyphosate and clethodim grass activity is being antagonized by dicamba. This question has led to research to examine whether sequential applications alleviate antagonism observed with dicamba plus glyphosate and/or clethodim mixtures and determine whether sequential treatments with those herbicides at 24 h, 72 h, or 168 h can improve junglerice control. Glyphosate + clethodim applications provided >90% junglerice control. The observed levels of antagonism varied by whether the location of the test was in the greenhouse or the field, and the timing of applications. In the greenhouse, clethodim + dicamba provided excellent control, whereas in the field, the same treatment showed a greater than 30% reduction in junglerice control compared with clethodim alone. However, control was restored by using a mixture of glyphosate + clethodim without dicamba. The environment at the time of application and relative GR level of the junglerice influenced the overall control of these sequential applications. When clethodim applied first followed by dicamba at 72 h or 168 h, better control was observed compared with applying dicamba followed by clethodim. Overall, mixing glyphosate + clethodim provided the most complete junglerice control regardless of timing. These data confirm that leaving dicamba out of the spray tank will mitigate herbicide antagonism on junglerice control. These data would also indicate that avoiding dicamba and glyphosate mixtures will also improve the consistency of control with glyphosate-susceptible junglerice.

A stakeholder survey was conducted from April through June of 2018 to understand stakeholders’ perceptions and challenges about cropping systems and weed management in Brazil. The dominant crops managed by survey respondents were soybean (73%) and corn (66%). Approximately 75% of survey respondents have grown or managed annual cropping systems with two to three crops per year cultivated in succession. Eighteen percent of respondents manage only irrigated cropping systems, and over 60% of respondents adopt no-till as a standard practice. According to respondents, the top five troublesome weed species in Brazilian cropping systems are horseweed (asthmaweed, Canadian horseweed, and tall fleabane), sourgrass, morningglory, goosegrass, and dayflower (Asiatic dayflower and Benghal dayflower). Among the nine species documented to have evolved resistance to glyphosate in Brazil, horseweed and sourgrass were reported as the most concerning weeds. Other than glyphosate, 31% and 78% of respondents, respectively, manage weeds resistant to acetyl-CoA carboxylase (ACCase) inhibitors and/or acetolactate synthase (ALS) inhibitors. Besides herbicides, 45% of respondents use mechanical, and 75% use cultural (e.g., no-till, crop rotation/succession) weed control strategies. Sixty-one percent of survey respondents adopt cover crops to some extent to suppress weeds and improve soil chemical and physical properties. Nearly 60% of survey respondents intend to adopt the crops that are resistant to dicamba or 2,4-D when available. Results may help practitioners, academics, industry, and policy makers to better understand the bad and the good of current cropping systems and weed management practices adopted in Brazil, and to adjust research, education, technologies priorities, and needs moving forward.