Wearable robots, sometimes known as exoskeletons, are incredible devices for improving human strength, reducing fatigue, and restoring impaired mobility. The control of powered exoskeletons, on the other hand, is still a challenge. This necessitates the development of a technique to simulate exoskeleton–wearer interaction. This study uses a two-dimensional human skeletal model with a powered knee exoskeleton to predict the optimal lifting motion and assistive torque. For lifting motion prediction, an inverse dynamics optimization formulation is utilized. In addition, the electromechanical dynamics of the exoskeleton DC motor are modeled in the lifting optimization formulation. The design variables are human joint angle profiles and exoskeleton motor current profiles. The human joint torque square is minimized subject to physical and lifting task constraints. Then, the lifting optimization problem is solved by the gradient-based sparse nonlinear optimizer (SNOPT). Furthermore, the optimal exoskeleton torque is implemented through a two-phase control strategy to provide optimal assistance in lifting. Experimental validations of the optimal control with 6 Nm and 16 Nm maximum assistive torque are presented. Both 6 Nm and 16 Nm maximum optimal assistance of the exoskeletons reduce the mean values of vastus lateralis, biceps femoris, and latissimus dorsi muscle activations compared to the lifting without the exoskeleton. However, the mean value of the vastus medialis activation is increased by a small amount for the exoskeleton case, although its peak value is reduced. Finally, the experimental results demonstrate that the proposed lifting optimization formulation and control strategy are promising for powered knee exoskeleton for lifting tasks.

A robotic system constructed as a wheeled inverted pendulum (WIP) serves as an impressive demonstrator, since this kind of system is inherently nonlinear, unstable, and nonminimum phase. These properties may pose several difficulties, when it comes to control and trajectory planning. This paper shows a method for deriving a highly dynamic trajectory compliant with the system dynamics by means of solving an optimal control problem (OCP) using multiple shooting. The assumed task includes that the WIP should pass a height-restricting barrier. This can be achieved by leaning back or forth, in order to reduce the overall height of the WIP. The constraints inherent to the definition of this trajectory are nonconvex due to the shape of the robot. The constraint functions have a local minimum in an infeasible region. This can cause problems when the initial guess is within this infeasible region. To overcome this, a multistage approach is proposed for this special OCP to evade the infeasible local minimum. After solving four stages of subsequent optimization problems, the optimal trajectory is obtained and can be used as feedforward for the real system.

Sleep apnea is one of the most common sleep disorders. The consequences of undiagnosed sleep apnea can be very serious, increasing the risk of high blood pressure, heart disease, stroke, and Alzheimer’s disease over a long period of time. However, many people are often unaware of their condition. The gold standard for diagnosing sleep apnea is nighttime polysomnography monitoring in a specialized sleep laboratory. However, these diagnoses are expensive and the number of beds is limited, and there is insufficient monitoring in terms of time dimension. Existing methods for automated detection use no more than three physiological signals, but all other signals are also associated with the patient’s sleep. In addition, the limited amount of medical real annotation data, especially abnormal samples, lead to weak model generalization capability. The gap between model generalization capability and medical field needs still exists. In this paper, we propose a method for integrating medical interpretation rules into a long short-term memory neural network based on self-attention with multichannel respiratory signals as input. We obtain attention weights through a token-level attention mechanism and then extract key rules of medical interpretation to assist the weights, improving model generalization and reducing the dependence on data volume. Compared with the best prediction performance of existing methods, the average improvements of our method in accuracy, precision, and f1-score are 3.26%, 7.03%, and 1.78%, respectively. The algorithm tested the performance of our model on the Sleep Heart Health Study data set and found that the model outperformed existing methods and could help physicians make decisions in their practices.

In this paper, we propose a comparison of open-source LiDAR and Inertial Measurement Unit (IMU)-based Simultaneous Localization and Mapping (SLAM) approaches for 3D robotic mapping. The analyzed algorithms are often exploited in mobile robotics for autonomous navigation but have not been evaluated in terms of 3D reconstruction yet. Experimental tests are carried out using two different autonomous mobile platforms in three test cases, comprising both indoor and outdoor scenarios. The 3D models obtained with the different SLAM algorithms are then compared in terms of density, accuracy, and noise of the point clouds to analyze the performance of the evaluated approaches. The experimental results indicate the SLAM methods that are more suitable for 3D mapping in terms of the quality of the reconstruction and highlight the feasibility of mobile robotics in the field of autonomous mapping.

To address coupling motion issues and realize large constant force range of microgrippers, we present a serial two-degree-of-freedom compliant constant force microgripper (CCFMG) in this paper. To realize a large output displacement in a compact structure, Scott–Russell displacement amplification mechanisms, bridge-type displacement amplification mechanisms, and lever amplification mechanisms are combined to compensate stroke of piezoelectric actuators. In addition, constant force modules are utilized to achieve a constant force output. We investigated CCFMG’s performances by means of pseudo-rigid body models and finite element analysis. Simulation results show that the proposed CCFMG has a stroke of 781.34 ${\unicode[Times]{x03BC}}\mathrm{m}$ in the X-direction and a stroke of 258.05 ${\unicode[Times]{x03BC}}\mathrm{m}$ in the Y-direction, and the decoupling rates in two directions are 1.1% and 0.9%, respectively. The average output constant force of the clamp is 37.49 N. The amplification ratios of the bridge-type amplifier and the Scott–Russell amplifier are 7.02 and 3, respectively. Through finite element analysis-based optimization, the constant force stroke of CCFMG is increased from the initial 1.6 to 3 mm.

The main contribution of this paper is the design and development of the lower body of PANDORA (3D-Printed Autonomous humaNoid Developed for Open-source Research Applications), a new humanoid robotic platform implementing additive manufacturing techniques. The three joint configurations (hip, knee, and ankle) along with the major three structural parts (pelvis, thigh, and shin) of the lower body are discussed. The use of 3D printing and PLA+ material makes the robot an affordable solution for humanoid robotics research that gives a high power-to-weight ratio by significantly reducing the number of parts, as well as manufacturing and assembly time. The range of motion of the lower body of PANDORA has been investigated and is found to be comparable to a human lower body. Further, finite element analysis has been performed on the major parts of the lower body of PANDORA to check the structural integrity and to avoid catastrophic failures in the robot. The use of in-house developed actuators and robot electronics reduces the overall cost of the robot and makes PANDORA easily accessible to the research communities working in the field of humanoids. Overall, PANDORA has the potential for becoming popular between researchers and designers for investigating applications in the field of humanoid robotics, healthcare, and manufacturing, just to mention a few. The mechanical designs presented in this work are available open source to lower the knowledge barrier in developing and conducting research on bipedal robots.

Machines and mechanisms realize processes, from the shaping process of a milling machine and the motion process of an automotive system to the trajectory realization of a robot. The dynamics of a machine generated by a properly chosen set of constraints in combination with an appropriate drive system is designed to meet the prescribed requirements of the process, which is done by projecting the machine equations of motion on the process dynamics. We get a set of nonlinear relations, which represent the machine motion in terms of the required process motion. A well-known example is the projection of arbitrary many robot degrees of freedom (DOFs) on a given path resulting in a set of nonlinear equations with one DOF only, the path coordinate s. Application of this idea can be used to construct a mobility space $(\ddot{s}, \dot{s}, s)$ for any combination of coordinates and constraints. The paper presents a corresponding approach for n-link robots by applying multibody system theory. Method might be interesting for layout of machines and mechanisms. Practical aspects are discussed, and an example is given.

The time-optimal path following (OPF) problem is to find a time evolution along a prescribed path in task space with shortest time duration. Numerical solution algorithms rely on an algorithm-specific (usually equidistant) sampling of the path parameter. This does not account for the dynamics in joint space, that is, the actual motion of the robot, however. Moreover, a well-known problem is that large joint velocities are obtained when approaching singularities, even for slow task space motions. This can be avoided by a sampling in joint space, where the path parameter is replaced by the arc length. Such discretization in task space leads to an adaptive refinement according to the nonlinear forward kinematics and guarantees bounded joint velocities. The adaptive refinement is also beneficial for the numerical solution of the problem. It is shown that this yields trajectories with improved continuity compared to an equidistant sampling. The OPF is reformulated as a second-order cone programming and solved numerically. The approach is demonstrated for a 6-DOF industrial robot following various paths in task space.

The paper discusses the analytical expressions of a motion profile characterized by elliptic jerk. This motion profile is obtained through a kinematic approach, defining the jerk profile and then obtaining acceleration, velocity, and displacement laws by successive integrations. A dimensionless formulation is adopted for the sake of generality. The main characteristics of the profile are analyzed, outlining the relationships between the profile parameters. A kinematic comparison with other motion laws is carried out: trapezoidal velocity, trapezoidal acceleration, cycloidal, sinusoidal jerk, and modified sinusoidal jerk. Then, the features of these motion profiles are evaluated in a dynamic case study, assessing the vibrations induced to a second-order linear system with different levels of damping. The results show that the proposed motion law provides a good compromise between different performance indexes (settling time, maximum absolute values of velocity and acceleration).

Contact force is one of the most significant feedback for robots to achieve accurate control and safe interaction with environment. For continuum robots, it is possible to estimate the contact force based on the feedback of robot shapes, which can address the difficulty of mounting dedicated force sensors on the continuum robot body with strict dimension constraints. In this paper, we use local curvatures to estimate the magnitude and location of single or multiple contact forces based on Cosserat rod theory. We validate the proposed method in a thin elastic tube and calculate the curvatures via Fiber Bragg Grating (FBG) sensors or image feedback. For the curvature feedback obtained from multicore FBG sensors, the overall force magnitude estimation error is $0.062 \pm 0.068$ N and the overall location estimation error is $3.51 \pm 2.60$ mm. For the curvature feedback obtained from image, the overall force magnitude estimation error is $0.049 \pm 0.048$ N and the overall location estimation error is $2.75 \pm 1.71$ mm. The results demonstrate that the curvature-based force estimation method is able to accurately estimate the contact force.

This paper addresses the flight path planning problem for multiple missiles engaging stationary targets in high-risk areas. Targets protected by air defence are preferably engaged by a fleet or swarm of missiles, not individual missiles. The concept of a swarm attack is that a large number of approaching missiles overwhelm air defence. The deployment of missiles is often part of a broader mission including further participants. Flight path planning is then an integral element of mission planning, requiring strict timing coordination of all members involved. The flight times of the missiles are dictated by the master planning. We present algorithms for offline planning and online re-planning of flight paths for a fleet of missiles with flight time constraints. The algorithms are based on an advanced bidirectional RRT* algorithm that generates risk-minimizing flight paths with predefined flight times. Online planning generates the flight paths of the fleet sequentially, maintaining a safety distance between the missiles to prevent mutual collision. Offline planning uses a global optimization approach to determine an optimal selection of flight paths from a large set of potential paths. The selection is performed by a branch and bound algorithm that determines optimal cliques in the path compatibility graph. The optimization is embedded in an iterative algorithm that allows to successively improve the mission success.

The present paper aims to design and simulate an adversarial strategy where a swarm of quadrotor UAVs is herding anti-aircraft land vehicles (AALV) that actively oppose the swarm’s objective by potentially taking them down. The main strategy is to block the AALVs’ line of sight to their goal zone (AALVs’ objective), shifting its trajectory so it reaches a kill zone instead (UAVs’ objective). The counter-swarm strategy performed by the AALVs consists of taking down the closest aerial units to the goal zone. As a result, a consensus algorithm is executed by the UAVs in order to assess the communication network and re-group. Consensus is based on the propagation of local observations that converge into a global agreement on a communication graph. Re-grouping is done via positioning around the kill zone vector or preferring an anti-clockwise formation to better close gaps. The adversarial strategy was tested in an empty arena and urban setting, the latter making use of a path-planning procedure that re-routes the AALV trajectory based on its current destination. Simulation results show a maximum UAV mission success rate converging to roughly 80% in the empty arena. When targeted elimination procedures are executed, UAV mission performance drops 5%, making no distinction between re-grouping strategies in the empty arena. The urban setting shows lower performance due to navigation complexity but favors the decision to re-group based on a formation that close gaps rather than positioning around the kill zone vector.

Minimally invasive surgery (MIS) has been an essential tool in the surgical sector for many years due to its crucial advantages compared to open surgery. To overcome remaining limitations, teleoperated MIS experienced a strong emergence. However, the widespread usage of such systems is hindered by the enormous financial hurdle. The use of standard components and conventional tools for teleoperated MIS can facilitate integration into existing hospital workflows and can be a cost-efficient and versatile approach for research purposes. To compensate for the lack of haptic feedback, some teleoperation setups inherit a sensor system allowing them to record interaction forces and display them at the user interface. In research and in commercially available systems, different positions for the sensor can be found. In this paper, mechanical interfaces for the guidance and actuation of non-wristed and wristed standard instruments are presented. Furthermore, a method for the extracorporeal measurement of interaction forces is presented, characterized, and discussed. The overall mean relative error of the magnitude of the interaction force is 9.4%, while the overall mean absolute error of the force vector is 14.4$^{\circ }$, both below the respective human differential perception threshold. The presented measurement method is a simple, yet sufficiently accurate approach to measure interaction forces in surgical telemanipulation.

The identification of nonlinear terms existing in the dynamic model of real-world mechanical systems such as robotic manipulators is a challenging modeling problem. The main aim of this research is not only to identify the unknown parameters of the nonlinear terms but also to verify their existence in the model. Generally, if the structure of the model is provided, the parameters of the nonlinear terms can be identified using different numerical approaches or evolutionary algorithms. However, finding a non-zero coefficient does not guarantee the existence of the nonlinear term or vice versa. Therefore, in this study, a meticulous investigation and statistical verification are carried out to ensure the reliability of the identification process. First, the simulation data are generated using the white-box model of a direct current motor that includes some of the nonlinear terms. Second, the particle swarm optimization (PSO) algorithm is applied to identify the unknown parameters of the model among many possible configurations. Then, to evaluate the results of the algorithm, statistical hypothesis and confidence interval tests are implemented. Finally, the reliability of the PSO algorithm is investigated using experimental data acquired from the UR5 manipulator. To compare the results of the PSO algorithm, the nonlinear least squares errors (NLSE) estimation algorithm is applied to identify the unknown parameters of the nonlinear models. The result shows that the PSO algorithm has higher identification accuracy than the NLSE estimation algorithm, and the model with identified parameters using the PSO algorithm accurately calculates the output torques of the joints of the manipulator.

There are various matrices to represent parallel mechanisms. It is essential to design a kind of approach to not only denote the parallel structures but also disclose the joint directions. In this paper, a novel methodology called the kinematic joint matrix (KJM) is proposed. It possesses the mapping relations with parallel manipulators with three kinds of kinematic joints. The size of such matrix is smaller when compared with that of topology matrix. A series of two to six degrees-of-freedom parallel architectures is denoted by the KJM. A convenient approach using a special block diagram is introduced to distinguish various kinds of kinematic joint matrices. In addition, detailed comparisons between KJM and topology matrix are investigated. Three regulations are proposed for the latter to be applicable to parallel mechanisms.

We propose a hierarchical cognitive navigation model (HCNM) to improve the self-learning and self-adaptive ability of mobile robots in unknown and complex environments. The HCNM model adopts the divide and conquers approach by dividing the path planning task into different levels of sub-tasks in complex environments and solves each sub-task in a smaller state subspace to decrease the state space dimensions. The HCNM model imitates animal asymptotic properties through the study of thermodynamic processes and designs a cognitive learning algorithm to achieve online optimum search strategies. We prove that the learning algorithm designed ensures that the cognitive model can converge to the optimal behavior path with probability one. Robot navigation is studied on the basis of the cognitive process. The experimental results show that the HCNM model has strong adaptability in unknown and environment, and the navigation path is clearer and the convergence time is better. Among them, the convergence time of HCNM model is 25 s, which is 86.5% lower than that of HRLM model. The HCNM model studied in this paper adopts a hierarchical structure, which reduces the learning difficulty and accelerates the learning speed in the unknown environment.

Modern approaches for exploration path planning generally do not assume any structural information regarding the operational area. Therefore, they offer good performance when the region of interest is entirely unknown. However, for some applications such as plantation forest surveying, partial information regarding the survey area is known before the exploration process. Because the region of interest consists only of the lower portions of the tree stems themselves, the ground and high-elevation sections of the environment are unimportant and do not need to be observed. Due to these unconventional conditions, existing methods favoring faster survey speeds produce suboptimal surveys as they do not try and ensure even coverage across the entire exploration volume, while methods that favor reconstruction accuracy produce excessively long survey times. This work proposes a structured exploration approach specifically for plantation forests utilizing a lawnmowing pattern to maximize coverage while minimizing re-visited regions, guiding the unmanned aerial vehicle to visit all areas. Experiments are conducted in various environments, with comparisons made to state-of-the-art exploration planners regarding survey time and coverage. Results suggest that the proposed methods produce surveys with significantly more predictable coverage and survey times at the expense of a longer survey.

Dielectric elastomers (DEs) find applications in many areas, particularly in the field of soft robotics. When modeling and simulating DE-based actuators and sensors, a substantial portion of the literature assumes the selected DE material to behave in some perfectly hyperelastic manner, and the vast majority have assumed invariant permittivity. However, studies on simple planar DEs have revealed instabilities and hastened breakdowns when a variable permittivity is allowed. This is partly due to the intertwined electromechanical properties of DEs rooted on their labyrinthine polymeric microstructures. This work focuses on studying the effects of a varying (with stretch) permittivity on the out-of-plane deformation of a circular DE, using a model derived from principles of strain-induced polymer birefringence. In addition, we utilize the Edward–Vilgis model, which attempts to account for effects related to crosslinking, and length extension, slippage, and entanglement of polymer chains. Our approach reveals the presence of “stagnation” regions in the electromechanical behavior of the DE actuator material. These stagnation regions are characterized by both electrical and mechanical critical electrostrictive coefficient ratios. Mechanically, certain values of the electrostrictive coefficient ratio predict cases where deformation does not occur in response to a change in voltage. Electrically, certain cases are predicted where changes in capacitance cannot be measured in response to changes in deformation. Thus, some combined conditions of loading and material properties could limit the effectiveness of DE membranes in either actuation or sensing. Therefore, our results reveal mechanisms that could be useful to designers of actuators and sensors and unveil an opportunity for exploring new theoretical materials with potential novel applications. Furthermore, since there are known analogous formulations between electrical and optical properties, criticality principles studied in this article could be extended to optomechanical coupling.

Earth-contact mechanism (ECM), a type of mechanism to keep the system in contact with the earth and to move with the terrain changes. This paper uses the virtual equivalent parallel mechanism (VEPM) to convert the terrain data into the kinematical variables of the moving platform in the VEPM, and further analyzes the performance of the VEPM at each terrain point. Then, the comprehensive performance of the VEPM is chosen as the optimization goal, and a task-oriented dimensional optimization approach combined with the particle swarm algorithm and the neural network algorithm is proposed. This paper conducted a comparative experiment to verify the superiority of the new approach in optimizing the ECM’s comprehensive performance, whose performance analysis also can be applied into the layout design of the ECM. This paper proposed an analysis method to construct the ECM’s performance map based on the digital terrain map, which helps the control system and operator to make the optimal control decision.

Productivity can be increased by manipulators tracking the desired trajectory with some constraints. Humans as moving obstacles in a shared workspace are one of the most challenging problems for cable-driven parallel mechanisms (CDPMs) that are considered in this research. One of the essential primary issues in CDPM is collision avoidance among cables and humans in the shared workspace. This paper presents a model and simulation of a reconfigurable, fully constrained CDPM enabling detection and avoidance of cable–human collision. In this method, unlike conventional CDPMs where the attachment points are fixed, the attachment points on the rails can be moved (up and down on their rails), and then the geometric configuration is adapted. Karush–Kuhn–Tucker method is proposed, which focuses on estimating the shortest distance among moving obstacles (human limbs) and all cables. When cable and limbs are close to colliding, the new idea of reconfiguration is presented by moving the cable’s attachment point on the rail to increase the distance between the cables and human limbs while they are both moving. Also, the trajectory of the end effector remains unchanged. Some simulation results of reconfiguration theory as a new approach are shown for the eight-cable-driven parallel manipulator, including the workspace boundary variation. The proposed method could find a collision-free predefined path, according to the simulation results.