This paper presents an investigation of the effectiveness of different inverse kinematics strategies in a context of physical human-robot interaction in which passive articulated shells are mounted on the links of a serial robot for manual guidance. The concept of passive link shells is first recalled. Then, inverse kinematics strategies that are designed to plan the trajectory of the robot according to the motion sensed at the link shells are presented and formulated. The different approaches presented all aim at interpreting the motion of the shells and provide an intuitive interaction to the human user. Damped Jacobian based methods are introduced in order to alleviate singularities. A serial 5-dof robot used in previous work is briefly introduced and is used as a test case for the proposed inverse kinematics schemes. The robot includes two link shells for interaction. Simulation results based on the different inverse kinematic strategies are then presented and compared. Finally, general observations and recommendations are discussed.

A spring-assisted modular and reconfigurable robot (SA-MRR) has been recently developed at our laboratory to reinforce its performance and enable safe and dexterous operation in human–robot environments. Multiple working mode (MWM) control enables each SA-MRR joint module to switch independently between working in a primary actuation mode and a secondary, spring-assisted mode that may improve task-specific energy performance measures and safety in a variety of manipulation tasks. The spring-assisted mode is characterized by synergy of spring and motor energy and may be summoned to offset motor energy demands or to safeguard a reconfigurable set of secondary joint limits. In this research work, two spring-assisted working mode strategies are proposed, and their characteristics have been investigated for SA-MRR actuation energy advantages while safe robot segregation in collaboration tasks is maintained. One MWM strategy has been designed to safeguard task-specific joint limits and is able to decrease motor energy consumption in some tasks. Another MWM strategy has been designed for energy efficiency and was able to reduce motor energy per cycle by $ \text{72}$ % in a simulated manipulation task while maintaining spatial safety constraints. Numerical simulations have demonstrated the effectiveness of the proposed spring-assisted working mode strategies for energy-aware safe manipulation applications.

Both prosthetic and robotic research communities have tended to focus on hand/gripper development. However, the wrist unit could enable higher mobility of the end effector and thus more efficient and dexterous manipulation. The current state of the art in both prosthetic and robotic wrists is reviewed systematically, mainly concerning their kinematic structures and resultant capabilities. Further, by considering the biomechanical advantages of the human wrist, an evaluation including the mobility, stability, output capability, load capacity and flexibility of the current artificial wrists is conducted. With the pentagonal capability radar charts, the major limitations and challenges in the current development of artificial wrists are derived. This paper hence provides some useful insights for better robotic wrist design and development.

Body posture determination methods have many applications, including product design, ergonomic workplace design, human body simulation, virtual reality, and animation industry. Initiated in robotics, inverse kinematic (IK) method has been widely applied to proactive human body posture estimation. The analytic inverse kinematic (AIK) method is a convenient and time-saving type of IK methods. It is also indicated that, based on AIK methods, a specific body posture can be determined by the optimization of an arbitrary objective function. The objective of this paper is to predict the postures of human arms during reaching tasks. In this research, a human body model is established in MATLAB, where the middle rotation axis analytic kinematic method is accomplished, based on this model. The joint displacement function and joint discomfort function are selected to be initially applied in this AIK method. Results show that neither the joint displacement function nor the joint discomfort function predicts postures that are close enough to natural upper limb postures of human being, during reaching tasks. Therefore, a bi-criterion objective function is proposed by integrating the joint displacement function and joint discomfort function. The accuracy of the arm postures, predicted by the proposed objective function, is the most satisfactory, while the optimal value of the coefficient, in the proposed objective function, is determined by golden section search.

This paper presents a hierarchical framework that allows online point-to-point dynamic-stability-constrained optimal trajectory planning of a mobile manipulator robot working on rough terrain. First, the kinematics model of a mobile manipulator robot and the zero moment point stability measure are presented as theoretical background. Then, a sampling-based quasi-static planning algorithm modified for stability guarantee and traction optimization in continuous dynamic motion is presented along with a mathematical proof. The robot’s quasi-static path is then used as an initial guess to warm start a nonlinear optimal control solver which may otherwise have difficulties finding a solution to the stability-constrained formulation efficiently. The performance and computational efficiency of the framework are demonstrated through an application to a simulated timber harvesting mobile manipulator machine working on varying terrain. The results demonstrate feasibility of online trajectory planning on varying terrain while satisfying the dynamic stability constraint. Qualitative and quantitative comparisons with existing methods are also presented.

This paper proposes a modular method based on the kinematics of serial manipulators to synthesize over-constrained mechanisms. Because the PPP manipulator has an unlimited work space, its end-effector can be constrained to trace a trajectory identical to those of another open-chain manipulator, including a P joint single link and an RR dyad. In doing so, two open-chain manipulators can be concatenated to form closed-loop mechanisms, including PPPP, PPPRR, or PPCR mechanisms. To design over-constrained mechanisms efficiently, the Denavit–Hartenberg convention is adopted to describe the PPP manipulator kinematically, and the Euler angles are utilized to derive geometric constraints of synthesized over-constrained mechanisms. Next, kinematic equations of the PPP manipulator can be modularized and applicable to analyze different closed-loop mechanisms. At last, by adjusting link lengths, twisted angles, and joint angles of the synthesized PPPRR and PPCR mechanisms to form other over-constrained mechanisms configurationally. The novelty of this research lies in modularizing the over-constrained mechanism into two movable serial manipulators whose end-effectors share identical trajectory and orientation. Thus, defining geometrical constraints of the over-constrained mechanism can be transformed into finding angular parameters describing the orientation of these two serial manipulators such that the end-effector coordinate system of two manipulators can properly be aligned. Angular parameters of the serial manipulators can be easily determined by means of Euler angles, which yields an advantage of easy calculation since it only involves the computation of Euler angles parameters. The presented method can be extended to the kinematic synthesis and analysis of more spatial closed-loop mechanisms.

The rotational joint plays a vital role in the industrial and civil areas, which is typically utilized to achieve the relative rotation between the adjacent parts. Generally, structuring a conventional rotational joint involves the bulk actuators (e.g., motor and hydraulic cylinders) and complex structures, bringing difficulty for miniaturing the dimension. In this paper, a class of novel rotational mechanisms, which were constructed by the combination of compliant mechanisms (e.g., cartwheel pivot and multileaf pivot) and intelligent actuator (e.g., shape memory alloy (SMA) wire and spring), was proposed to reduce the complexity of the conventional rotational joints. As the case study, a novel SMA wire-driven flexural rotational mechanism (SDFRM), which is constructed by the cartwheel pivot and SMA wire, was developed to demonstrate the feasibility of combining the compliant mechanism and smart actuator. After establishing the static model of the cartwheel pivot and the thermal effect model of the SMA wire, the overall model of SDFRM was developed for the comprehensive performance analysis and the control system design. After that, the model validation and experiments were performed with the proposed prototype and control system. It can be seen from the experimental results that the proposed model can be validated within the error of 3.8%. In addition, the performance study on SDFRM indicates that the prototyped SDFRM system can track the given trajectories within the error of 0.2 mm in the workspace. As a result, the proposed concept was demonstrated as an effective way to reduce the dimension and weight of the conventional rotational joint.

In this paper, we propose a set of robust training methods for deep reinforcement learning to transfer learning acquired in one control task to a set of previously unseen control tasks. We improve generalization in commonly used transfer learning benchmarks by a novel sample elimination technique, early stopping, and maximum entropy adversarial reinforcement learning. To generate robust policies, we use sample elimination during training via a method we call strict clipping. We apply early stopping, a method previously used in supervised learning, to deep reinforcement learning. Subsequently, we introduce maximum entropy adversarial reinforcement learning to increase the domain randomization during training for a better target task performance. Finally, we evaluate the robustness of these methods compared to previous work on simulated robots in target environments where the gravity, the morphology of the robot, and the tangential friction coefficient of the environment are altered.

This study focuses on development, task planning, and dynamic analysis of a previously proposed spherical parallel robot manipulator that is conceptually enhanced to adapt various brain surgery scenarios. Conceptual design of the proposed manipulator was briefly introduced and explained. In order to simulate one of the possible surgery scenarios, a case study of craniotomy was designed along with its trajectory planning. Dynamic analysis of proposed manipulator was performed by Lagrange method, and required actuator torque values were calculated for the desired trajectory. At the end of the study, hardware verification was carried out on the manufactured prototype of the system by comparing both calculated/acquired torque values and desired/actual trajectories. Promising verification results in terms of system dynamics and trajectory execution were introduced.

We propose a computational design tool to enable casual end-users to easily design, fabricate, and assemble flat-pack furniture with guaranteed manufacturability. Using our system, users select parameterized components from a library and constrain their dimensions. Then they abstractly specify connections among components to define the furniture. Once fabrication specifications (e.g., materials) designated, the mechanical implementation of the furniture is automatically handled by leveraging encoded domain expertise. Afterwards, the system outputs three-dimensional models for visualization and mechanical drawings for fabrication. We demonstrate the validity of our approach by designing, fabricating, and assembling a variety of flat-pack (scaled) furniture on demand.

In this study, we present a new approach to improving vocal fold access to perform phonomicrosurgery. It is done by shooting the laser through a mirror to reach the vocal fold hidden parts. A geometrical study of laser shooting path was conducted for vocal fold anatomical constraints, followed by devising a laser-shooting system conceptual design. Control laws were developed and tested by simulation and validated experimentally on a test bench in a monocular and stereoscopic configuration. Simulation and experimental results are provided to demonstrate the effectiveness of the developed approach.

This paper investigates the influence of adding an upper body to a bipedal robot on its stable walking behavior. The robot’s parts are mutually interconnected through an actuator network system. Therefore, the movement pattern of the upper body depends on the type of interactions created with other limbs. Throughout the experiments, various interactions among the different body parts were tested. The results showed that a robot with a motionless upper body exhibited unstable walking behavior. However, once the same upper body was involved and interacted properly, with other body parts, its movement significantly helped to stabilize the behavior of the robot.

This paper presents a new approach for geometrically constrained path planning applied to the field of robotic grasping. The method proposed in this paper is based on the Fast Marching Square (FM $\, ^2$ ) and a path calculation approach based on an optimization evolutionary filter named Differential Evolution (DE). The geometric restrictions caused by the link lengths of the kinematic chain composed by the robot arm and hand are introduced in the path calculation phase. This phase uses both the funnel potential of the surroundings created with FM $\, ^2$ and the kinematic constraints of the robot as cost functions to be minimized by the evolutionary filter. The use of an optimization filter allows for a near-optimal solution that satisfies the kinematic restrictions, while preserving the characteristics of a path computed with FM $\, ^2$ . The proposed method is tested in a simulation using a robot composed by a mobile base with two arms.

Recent improvements in robotic arms have increased their interest in many areas such as the industry and biomedical sectors. Path planning is an essential part of the robotic arm, since most automated factories seek to move things from one place to another with obstacles providing the shortest route. This paper presents a novel optimal path planning algorithm based on the 3D cubic Bézier curve with three shape parameters and its geometric properties and hierarchical clustering. The proposed method utilizes a feature vector which is obtained from curvature, torsion, and path length of candidate curves. A hierarchical clustering is applied to determine curve pairs. Then, a multi-objective function is used to determine the best curve pair, which gives the best curve for the robotic arm. Besides forming the optimal 3D cubic Bézier path, the optimal ruled and developable path surfaces are obtained. In addition to presenting theoretical results, this work also demonstrates the proposed method on several Kinova Gen3 robotic arm cases.

The quaternion is a powerful and common tool to avoid singularity in rotational dynamics in three-dimensional (3D) space. Here it has been particularly used as an alternative to Euler angles and rotation matrix. The application of the quaternion is exercised in quadrotor modeling and control. It changes the dynamics and represents a singularity-free attitude model. Here for the first time (for the best knowledge of authors), the state-dependent differential Riccati equation (SDDRE) control has been implemented on the quaternion-based model of a quadcopter. The proposed control structure is capable of aerobatic flight, and the Pugachev’s Cobra maneuver is chosen to assess the capability of the quaternion-based SDDRE approach. The introduced control simulator is validated by comparison with conventional dynamics based on Euler angles, controlled using a proportional-derivative (PD) controller on a normal regulation flight. The simulator successfully performed the Cobra maneuver and also validated the proposed structure. The more precision in regulation along with lower energy consumption demonstrated the superiority of the introduced approach.

Robotic systems have shown capabilities to perform inspection tasks in dangerous and difficult-to-access environments, such as those found in different components of power plants. However, most of the current robotic inspection technology is designed for specific components. Aerial robots, commonly termed as Drones, have raised an option to inspect a wider range of structural components. Nevertheless, current aerial inspecting technology still relies on a human pilot with limited line of sight, field of view and a reduced perception as the drone flies away, which prevents performing close-quarter inspection in intricate, structurally complex and GPS-denied environments. This work introduces offline inspection path generation methods based on robotics-integrated to manufacturing techniques. One method uses computer-aided manufacturing (CAM) techniques and the other an additive manufacturing (AM) approach to generate the flight path. That is to say, the drone would fly along the path described by a 3D (Three Dimensional) printer’s extruder or a CNC (Computer Numerical Control) machining tool, enabling to fly very close the structure even in physical structures with a complex geometry. Once the trajectories are generated, they are introduced for its validation in the Gazebo robotics simulator. Simulation results demonstrate the proper performance of the method and confirm that this approach can be used for close inspection of structuralcomponents.

In study this paper, a geometric formulation is proposed to describe the workspace of parallel manipulators by using a recursive approach as an extension of volume generation for solids of revolution. In this approach, the workspace volume and boundary for each limb of the parallel manipulator is obtained with an algebraic formulation derived from the kinematic chain of the limb and the motion constraints on its joints. Then, the overall workspace of the mechanism can be determined as the intersection of the limb workspaces. The workspace of different kinematic chains is discussed and classified according to its external shape. An algebraic formulation for the inclusion of obstacles in the computation is also proposed. Both analytical models and numerical simulations are reported with their advantages and limitations. An example on a 3-SPR parallel mechanism illustrates the feasibility of the formulation and its efficiency.

In this paper, we present a novel passive single degree-of-freedom (DoF) manipulator design and its integration on an autonomous drone to capture a moving target. The end-effector is designed to be passive, to disengage the moving target from a flying UAV and capture it efficiently in the presence of disturbances, with minimal energy usage. It is also designed to handle target sway and the effect of downwash. The passive manipulator is integrated with the drone through a single DoF arm, and experiments are carried out in an outdoor environment. The rack-and-pinion mechanism incorporated for this manipulator ensures safety by extending the manipulator beyond the body of the drone to capture the target. The autonomous capturing experiments are conducted using a red ball hanging from a stationary drone and subsequently from a moving drone. The experiments show that the manipulator captures the target with a success rate of 70% even under environmental/measurement uncertainties and errors.

One of the most challenging tasks for autonomous robots is avoiding unexpected obstacles during their path following operation. Follow the gap method (FGM) is one of the most popular obstacle avoidance algorithms that recursively guides the robot to the goal state by considering the angle to the goal point and the distance to the closest obstacles. It selects the largest gap around the robot, where the gap angle is calculated by the vector to the midpoint of the largest gap. In this paper, a novel obstacle avoidance procedure is developed and applied to a real fully autonomous wheelchair. This proposed algorithm improves the FGM’s travel safety and brings a new solution to the obstacle avoidance task. In the proposed algorithm, the largest gap is selected based on gap width. Moreover, the avoidance angle (similar to the gap center angle of FGM) is calculated considering the locus of the equidistant points from obstacles that create obstacle circles. Monte Carlo simulations are used to test the proposed algorithm, and according to the results, the new procedure guides the robot to safer trajectories compared with classical FGM. The real experimental test results are in parallel to the simulations and show the real-time performance of the proposed approach.