Nuclear fuel plates based on a γU-Mo/Al mixture are proposed for research reactors. In this work their thermal behavior in the [425; 550°C] temperature range has been studied mainly by neutron and high energy X-ray diffraction. Even if complementary studies will be necessary, the kinetics of first the growth of the interaction layer between γU-Mo and Al and second of the γU-Mo destabilization have been accurately measured. This basic work should be helpful for defining manufacturing conditions for fuel plates with optimized composition.

Crystallographic structures of the three NaSbR(PO4)3 (R = Cr, Fe, In) phases were determined at room temperature from X-ray powder diffraction (XRD) data using the Rietveld analysis. The three compounds belong to the Nasicon structural family. The presence of the (303) reflection in all XRD spectra of NaSbR(PO4)3 shows clearly that all compounds crystallise in rhombohedral system with R3 space group. Na atoms are practically ordered within the two positions, 3a and 3b, of M1 sites. Structure refinements show also a partially-ordered distribution of Sb5+ and R3+ ions within the Nasicon framework. A Raman and Infrared spectroscopic study was used to obtain further structural information about the nature of bonding in NaSbR(PO4)3 (R = Cr, Fe, In) phases.

Phosphostrontium carbonate hydroxyapatites having the general formula Sr10(PO4)6(OH)(2-2x)(CO3)x were prepared by solid gas reaction at different temperatures in the range 0 ≤ x ≤ 1. Infrared spectroscopy investigation reveals a carbonate groups substituting hydroxyl ions. Intensity bands increasing with the carbonate amount introduced in the lattice, while the one corresponding to hydroxyl decreases until disappearance. The Rietveld refinement of the structural model using X-ray powder diffraction patterns is used to determine the substitution rate. It was quantified by the refinement of the occupancy sites affected by the substitution. The crystallographic study shows the evolution of the atomic coordinate in the apatite due to the carbonate incorporation. The variation of the main interatomic distances and the bond angles was also discussed.

Evidence is provided that the tridymite component observed in the X-ray diffraction patterns of some sewage sludge ashes (SSAs) should not be interpreted as the tridymite modification of SiO2 but as the tridymite form of AlPO4. This proof is based on a combined X-ray Powder Diffraction (XRD), X-ray fluorescence (XRF) and Mossbauer spectroscopy investigation of two SSAs produced at two fluidized bed incineration facilities, located in different municipalities and operated differently. The structural and chemical characterization was carried out on the ‘as received’ SSA samples as well as on the residues of these two SSAs pretreated by leaching in citric acid. In addition, direct proof is presented that the tridymite form of AlPO4 does crystallize from X-ray amorphous precursors under conditions that mimic the huge heating rate and short retention time (just seconds at T ≈ 850 °C) typical for fluidized bed incinerators.

X-ray diffraction is commonly used for non-destructive and precise quantitative determination of internal strain distributions. In recent years tomographic imaging has also been established as a powerful tool for precise non-destructive evaluation of internal structure in materials offering submicron resolution 3D imaging of density distributions. “Diffraction Strain tomography” (DST) concept (Korsunsky, Vorster et al. 2006) has been introduced as a means of tomographic reconstruction of two-dimensional internal strain distributions. The application of this approach during in situ loading has been subsequently demonstrated (Korsunsky et al., 2011). In the present study, similar acquisition strategy was used for diffraction data collection from a Ni-base superalloy turbine blade fabricated by DMLS (Direct Metal Laser Sintering, also sometimes referred to as DLD, Direct Laser Deposition). The experiment was conducted on beamline I12 (JEEP) at Diamond Light Source, UK. Each location within the object was multiply “sampled” (i.e. diffraction patterns were collected containing its contribution) by incident X-ray beams travelling through the sample at different angles. The setup of the beamline also allowed to acquire simultaneously a conventional (absorption tomography) reconstruction of the sample shape. The aim of the experiment was to obtain detailed information about the sample shape, structure, and state. The interpretation of diffraction tomography data requires precise calibration of the sample detector distance at different rotations and positions across the sample, and subsequent application of corrections to remove geometry-induced strain aberrations.

Atenolol is the most used drug in Brazil to hypertension treatment. Two crystal structures are known for this molecule: a racemic form (R,S)-atenolol and a pure form S-atenolol. The racemic form is found in commercial tablets. X-ray powder diffraction (XRD) is an adequate tool to study crystalline structures including drugs. Using the Rietveld Method with XRD data it is possible to quantify the crystalline structures existing in the raw material. Other methods like Le Bail and Pawley can be used to the profile fit and phases identification. For this work we analyzed three tablets of atenolol, two generics and the reference (materials were purchased from a drugstore at the city of Araraquara). These tablets were analyzed by Rietveld, Le Bail and Pawley methods. All tablets exhibited the racemic mixture API (R,S)-atenolol. Some crystalline excipients could be characterized: magnesium carbonate hydrate, lactose monohydrate and talc. The conclusion is that the three methods can be efficiently used to characterize the three atenolol tablets.

Powder diffraction from protein powders using in-house diffractometers is an effective tool for identification and monitoring of protein crystal forms and artifacts. As an alternative to conventional powder diffractometers a single crystal diffractometer equipped with an X-ray micro-source can be used to collect powder patterns from 1 µl samples. Using a small-angle X-ray scattering (SAXS) camera it is possible to collect data within minutes. A streamlined program has been developed for the calculation of powder patterns from pdb-coordinates, and includes correction for bulk-solvent. A number of such calculated powder patterns from insulin and lysozyme have been included in the powder diffraction database and successfully used for search-match identification. However, the fit could be much improved if peak asymmetry and multiple bulk-solvent corrections were included. When including a large number of protein data sets in the database some problems can be foreseen due to the large number of overlapping peaks in the low-angle region, and small differences in unit cell parameters between pdb-data and powder data. It is suggested that protein entries are supplied with more searchable keywords as protein name, protein type, molecular weight, source organism etc. in order to limit possible hits.

The crystal structure of the third polymorph of dibenzylsquaramide (Portell, A. et al., 2009), (fig. 1) has been determined from laboratory X-ray powder diffraction data by means of direct space methods using the computing program FOX. (Favre-Nicolin and Černý, 2002) The structure resolution has not been straightforward due to several difficulties on the indexing process and in the space group assignment. The asymmetric unit contains two different conformers, which has implied an additional difficulty during the Rietveld (Rietveld, 1969) refinement. All these issues together with particular structural features of disquaramides are discussed.

The viability of the direct-space strategy TALP (Vallcorba et al., 2012b) to solve crystal structures of molecular compounds from laboratory powder diffraction data is shown. The procedure exploits the accurate metric refined from a ‘Bragg-Brentano’ powder pattern to extract later the intensity data from a second ‘texture-free’ powder pattern with the DAJUST software (Vallcorba et al., 2012a). The experimental setup for collecting this second pattern consists of a circularly collimated X-ray beam and a 2D detector. The sample is placed between two thin Mylar® foils, which reduces or even eliminates preferred orientation. With the combination of the DAJUST and TALP software a preliminary but rigorous structural study of organic compounds can be carried out at the laboratory level. In addition, the time-consuming filling of capillaries with diameters thinner than 0.3mm is avoided.

Many N-acylhydrazone derivatives synthetized in LASSBio® cannot be prepared as single crystals of sufficient size and/or quality for structure determination to be carried out using single crystal X-ray diffraction techniques. This article highlights the opportunity for determining crystal structures of this class of compounds directly from powder diffraction data. For this task, the crystal structure of LASSBio-294 was re-determined by means of conventional X-ray powder diffraction data and so, compared with the crystal structure already determined for single crystal data. LASSBio-294 is a cardioactive compound of the N-acylhydrazone class, which can become part of the therapeutic interventions designed to decrease exertional fatigue, and, consequently, improve the quality of life of patients suffering from chronic heart failure. Its final crystal structure was refined by means of the Rietveld method (Rietveld, 1967; 1969). This drug crystallizes in a monoclinic (P21/c) space group, with unit cell parameters a = 11.3413(3) Å, b = 12.3573(4) Å, c = 9.0158(3) Å, β = 89.821(2)°, V = 1263.55(7) Å3, Z = 4, Ź = 1 and ρcalc = 1.4419(1) g cm−3. The goodness-of-fit indicator and R-factors were, respectively: χ2 = 1.203, R Bragg  = 0.696%, R wp  = 5.59%, R exp  = 4.65% and R p  = 4.18%. The molecules in LASSBio-294 are H-bonded along the c-axis involving the atoms N(3)–H(8)···O(4).

The crystal structure of a new hafnium oxyhydroxide obtained by an ion-exchange reaction from a Li2HfO3 precursor has been solved by a direct method and refined using Rietveld full profile fitting based on X-ray powder diffraction data. HfO(ОН)2 crystallizes in a P21/c monoclinic unit cell (a = 5.5578(5) Å, b = 9.0701(10) Å, c = 5.7174(5) Å, β = 119.746(5)°); its structure can be described as a framework formed by edge-sharing HfO6 octahedra connected to each other via vertices. In addition, an analysis of the atomic pair distribution function obtained using synchrotron radiation was used to confirm the model and to describe fine-structure features.