Plastics generally play a very important role in a plethora of industries, fields and our everyday lives. In spite of their cheapness, availability and important contributions to lives, they however, pose a serious threat to the environment due to their mostly non-biodegradable nature. Recycling into useful products can reduce the amount of plastic waste. Thermal degradation (Pyrolysis) of plastics is becoming an increasingly important recycling method for the conversion of plastic materials into valuable chemicals and oil products. In this work, waste Polyethylene terephthalate (PET) water bottles were thermally converted into useful gaseous and liquid products. A simple pyrolysis reactor system has been used for the conversions with the liquid product yield of 65 % at a temperature range of 400°C to 550°C. The chemical analysis of the pyrolytic oil showed the presence of functional groups such as alkanes, alkenes, alcohols, ethers, carboxylic acids, esters, and phenyl ring substitution bands. The main constituents were 1-Tetradecene, 1-Pentadecene, Cetene, Hexadecane, 1-Heptadecene, Heptadecane, Octadecane, Nonadecane, Eicosane, Tetratetracontane, 1-Undecene, 1-Decene). The results are promising and can be maximized by additional techniques such as hydrogenation and hydrodeoxygenation to obtain value-added products.

The interaction of spherical gold nanoparticles (AuNPs) of 20nm elaborated by Turkevich method with the erythrocytes ghosts (7-8 μm) cell membrane was evaluated. The AuNPs-Membrane interaction was determined using confocal microscope, Uv-Vis spectroscopy and SEM analysis. The result show that nanoparticles larger than 20nm are adhered to the erythrocyte ghost membrane due their size and surface modification. Smaller AuNPs enter onto the cell by simple diffusion through the plasmatic membrane voids, these data may favor the best design and application in the treatments applied in biomedicine.

Melting, solidification and solid-state transformation of the intermetallic Ni3Sn compound were investigated in situ using synchrotron high-energy X-ray diffraction. It was observed that the compound undergoes a hexagonal to cubic transition before melting. In solidification, a disordered cubic phase crystallizes from the liquid at a large undercooling but it is reordered prior to bulk solidification. In melting and solidification, forced or natural flows are active bringing about significant changes of crystal orientations. These in situ observations provided insights into phase transformations of Ni3Sn at elevated temperatures and their roles in formation of metastable microstructure consisting of coarse grains and subgrains.

Edible devices are an emergent technology and in this paper the simplicity and efficacy that poly(acrylic acid)/calcium hydroxide possess in creating a pH sensitive ingestible actuator which responds to acidic environments such as gastric fluid is demonstrated. It was found that poly(acrylic acid)/calcium hydroxide hydrogels exhibit reversible actuation upon submerging in 0.1 M sodium citrate for 2 hours. Our results show that these hydrogels can restore their compressive stress to 0.19 ± 0.06 MPa, swelling ratio to 26 ± 2 and volume to 56% ± 3% of its original volume. This work offers new possibilities for developments in a variety of fields such as drug delivery, 4D printed materials, soft robotics and edible devices.

One of the great challenges in the use of nanomaterials is their production at low costs and high yields. In this work aluminum nanoparticles, from aluminum powder, were produced by wet mechanical milling through a combination of different attrition milling conditions such as ball-powder ratio (BPR) and the amount of solvent used. It was observed that at 600 rpm with a BPR of 500/30 g for 12 h, it was possible to produce nanoparticles with a size close to 20 nm, while at 750 rpm with a BPR of 380/12.6 g for 12 h, nanoparticles of approximately 10 nm were obtained. Scanning and transmission electron microscopy confirmed that the milling product is an agglomeration of nanoparticles with different sizes. These results show the feasibility of obtaining aluminum nanoparticles by mechanical milling using only ethanol as solvent, avoiding hazardous by-products obtained from chemical routes, and the use of complicated methods such as laser ablation and arc discharge.

In recent years there has been an increase in the field of research of advanced steels that have excellent mechanical properties combining high strength with excellent ductility. Within this range of advanced steels are the stable austenitic phase steels at room temperature of twinning induced plasticity known as TWIP. An important aspect to highlight about TWIP steels is their addition with different microalloying elements, generally less than 0.20 wt. %, which are forming precipitated phases such as carbides, nitrides and carbonitrides, and directly or indirectly control and/or modify microstructure and mechanical properties in these steels. Microalloying elements can cause a higher degree of hardening due to the formation of precipitates and grain refinement. The present research work studies the inclusions and second-phase particles formed in Fe–21Mn–1.3Si–1.6Al TWIP steels microalloyed with Ti, Nb, V, Mo and Ti/B in as-solution condition. TWIP steels melted in induction furnace were homogenized and hot-rolled at 1200 °C with reduction of 60 %. Subsequently, rolled plates were solubilized at 1100 °C followed by water quench. Thermodynamics-based predictions of inclusions and second-phases of different TWIP steels were carried out using JMatPro®V.9.1.2. Metallographic characterization was carried out by light optical and scanning electron microscopies (LOM, SEM), while second-phase particles characterization was performed using energy dispersion spectroscopy (SEM-EDS). Also, Vickers microhardness tests were carried out in accordance to ASTM E92 standard. In general, results showed the formation of inclusions of AlN and MnS at higher temperatures, which act as nuclei points for the precipitation particles of each type of microalloying element (TiN, TiC, Nb (C, N), VC and MoC) at lower temperatures. The studied TWIP steels exhibit similar microhardness values, since the microalloying elements are mostly dissolved in solid solution. The TWIP steels microalloyed with V and Ti exhibited the highest microhardness values.

This study investigated the effect of production and curing parameters on the mechanical performance of compressed earth blocks (CEBs) stabilized with 0-20 wt % CCR (calcium carbide residue). Kaolinite (K) and quartz (Q)-rich earthen materials were mixed with the CCR and used to mould CEBs at optimum moisture content (OMC) and OMC+2 % of the dry mixtures, cured at 20 °C, ambient temperature in the lab (30±5 °C) and 40 °C for 0-90 days. After curing, the reactivity of the materials and compressive strength of dry CEBs were tested. Increasing the moulding moisture from OMC to OMC+2 decreased the compressive strength 0.3 times (4.4 to 3.3 MPa) for the CEBs stabilized with 20 % CCR cured at 30±5 °C for 45 days. Similarly, the compressive strength (4.4 MPa) was reached by CEBs stabilized with 10 and 20 % CCR after 28 and 45 days of curing, respectively. At 40 °C, the compressive strength increased 3.3 times (1.1 to 4.7 MPa with 0 to 20 % CCR) for K-rich and 2.5 times (2 to 7.1 MPa) for Q˗rich materials. At 20 °C, the compressive strength increased only 1.3 times (1.1 to 2.5 MPa) for K˗rich and barely 0.7 times (2 to 3.4 MPa) for Q-rich materials. These suggest that CCR is useful for stabilization and improving the performances of CEBs in hot regions.

Metallic palladium (Pd) is used for hydrogen storage and detection. Fabrication of a nanoporous (NP) Pd structure can increase the specific surface area leading to a significant improvement in the sensitivity. In our previous study, we succeeded in forming a NP-Pd film by dealloying an Al-Pd alloy film using citric acid as a chelating agent. This method was environmentally friendly but had a long reaction time and a considerable amount of Al remained after dealloying; hence, the Pd purity was reduced. In this study, we succeeded in forming a higher purity NP-Pd film faster by dealloying the nitrogen-containing Al-Pd (Al-Pd-N) film using ethylene-diamine-tetraacetic-acid (EDTA) as a chelating material.

Fibronectin (FN) is a mediator molecule, which can connect cell receptors to the extracellular matrix (ECM) in tissues. This function is highly desirable for biomaterial surfaces in order to support cell adhesion. Controlling the fibronectin adsorption profile on substrates is challenging because of possible conformational changes after deposition, or due to displacement by secondary proteins from the culture medium. Here, we aim to develop a method to realize self-stabilized ECM glycoprotein layers with preserved native secondary structure on substrates. Our concept is the assembly of FN layers at the air-water (A-W) interface by spreading FN solution as droplets on the interface and transfer of the layer by the Langmuir-Schäfer (LS) method onto a substrate. It is hypothesized that 2D confinement and high local concentration at A-W interface supports FN self-interlinking to form cohesive films. Rising surface pressure with time, plateauing at 10.5 mN·m-1 (after 10 hrs), indicated that FN was self-assembling at the A-W interface. In situ polarization-modulation infrared reflection absorption spectroscopy of the layer revealed that FN maintained its native anti-parallel β-sheet structure after adsorption at the A-W interface. FN self-interlinking and elasticity was shown by the increase in elastic modulus and loss modulus with time using interfacial rheology. A network-like structure of FN films formed at the A-W interface was confirmed by atomic force microscopy after LS transfer onto Si-wafer. FN films consisted of native, globular FN molecules self-stabilized by intermolecular interactions at the A-W interface. Therefore, the facile FN self-stabilized network-like films with native anti-parallel β-sheet structure produced here, could serve as stable ECM protein coatings to enhance cell attachment on in vitro cell culture substrates and planar implant materials.

We report on the synthesis, properties, and ion conductivity of a solid polymer electrolyte produced from polytetrahydrofuran (PTHF) photo-crosslinked with 3,4-epoxycyclohexylmethyl 3ʹ,4ʹ-epoxycyclohexane carboxylate (Epoxy), via an active monomer mechanism that facilitates the reaction of the native hydroxyl and epoxide end-groups. Crosslinked samples were loaded with different quantities of lithium tetrafluoroborate (LiBF4) and evaluated by electrochemical spectroscopy impedance (EIS) to determine their ionic conductivity. An increase in lithium salt loading led to an increase in ionic transport, reaching competitive conductivities of up to 10-3 S/cm at temperatures typical for battery operation. Thermal analysis confirms the amorphous structure and high thermal stability (30-90°). The mechanical analysis shows the materials possess suitable stiffness for applications. The results demonstrate a new synthetic route to tunable crosslinked networks for a broad range of chemical building blocks to achieve high lithium-ion conduction and attain desirable thermal and mechanical properties.

Magnesium hydride (MgH2) is a prospective material for the storage of hydrogen in solid materials. It can also be envisaged for thermal energy storage applications since it has the potential to reversibly absorb hydrogen in large quantities, theoretically up to 7.6% by weight. Also, MgH2 is inexpensive, abundant, and environmentally friendly, but it operates at relatively high temperatures, and the kinetics of the hydrogenation process is slow. Mechanical milling and the addition of catalyst can alter the activation energy and the kinetic properties of the MgH2 phase. It is known that the addition of titanium hydride (TiH2) lowers the enthalpy and enhances the absorption of hydrogen from MgH2, titanium oxide (TiO2) enhances the desorption of hydrogen and niobium oxide (Nb2O5) enhances the absorption of hydrogen. In this work, the influences of the catalysts, as mentioned above on the properties of MgH2, were studied. The samples were analyzed in terms of crystal and microstructure as well as hydrogen storage properties using a pressure-composition isotherm (PCT)measurement. It has been found that the simultaneous addition of the three catalysts enhances the properties of MgH2, lowers the activation energy and operating temperature, increases the rate of intake and release of hydrogen, and provides the largest gravimetric hydrogen storage capacity.

Molybdenum disulfide (MoS2) is expected to be applied for devices in various fields owing to its unique characteristics. Establishing a high-productivity manufacturing method which yields high quality films is an important and unresolved issue for the practical applications of MoS2. Among different techniques conducted by researchers all over the world, our approach is cold-wall metal-organic chemical vapor deposition, and we previously reported the deposition of MoS2 with i-Pr2DADMo(CO)3, a novel Mo precursor [S. Ishihara, et al., MRS Advances 3, 379-384 (2018).]. In this study, with the aim of further improving the quality of the MoS2 film using this new Mo precursor, various film formation conditions were controlled and the influence on the film quality was investigated. X-ray photoelectron spectroscopy, atomic force microscopy and Raman spectroscopy were used as evaluation techniques of the samples. As a result, mm-scale uniform film was formed with the deposition time less than 30 min. at temperature as low as 400 °C to 500 °C. It was revealed that maintaining low Mo/S supply ratio (SRMo/S) is crucial in fabricating high quality films.

To understand the potential impacts on both thermal performance and condensation risks of using low-e coatings in buildings, especially in the single-pane sector, in this work, parametric numerical analysis in winter is conducted. Three building glazing models, including the single-pane without low-e coatings (SNL), single-pane with exterior low-e coatings (SEL), and single-pane with interior low-e coatings (SIL), are selected and simulated through COMSOL over a range of outdoor temperature and indoor humidity. The temperature of the interior surface of windows, heat flux through windows, winter U-factor of center-of-glass will be obtained and compared. Additionally, a numerical code is developed in R to compute and plot the condensation temperatures of these three models upon the given indoor humidity levels and simulated surface temperatures. The comprehensive analysis of condensation risks on the glazing inner surface of the three models will be conducted.

This parametric simulation effort indicates an interesting feature for a single-pane window: while the SIL gives a substantially lower U than the SNL, it also corresponds to an increased condensation risk under certain limits of external temperature and indoor humidity levels. Upon the resultant condensation temperatures and thermal performance analysis, we can conclude the parameters of the windowpane property, coating emissivity and placement, local climate, and building interior thermal settings must be taken into account collectively when it comes to adding low-e coatings to single-pane windows.

Photodetectors based on a hybrid structure of graphene sensitized with lead selenide (PbSe) colloidal quantum dots (QDs) effective in the near-infrared (NIR) region with high responsivity were investigated. Colloidal PbSe nanocrystals were synthesized via a hot injection method. The bandgap of the synthesized nanocrystals was determined to be 0.68 eV by measuring their optical absorbance spectrum. Photodetectors based on PbSe QDs were investigated to examine their functionality. These devices were characterized by measuring the current-voltage curves in the dark and light and the spectral response spectrum. A photodetector was fabricated using a multilayer mechanically exfoliated graphene on a Si/SiO2 substrate with a PbSe QDs layer on top. A responsivity and detectivity of 1265A/W and 3.4 *1010cm.Hz0.5/W respectively were calculated based on current-voltage measurements.

To contribute to the development of new alternatives in the area of polymers for biomedical applications, the surface modification of a cotton gauze grafted with a N-vinylcaprolactam (NVCL) by ionizing gamma radiation was developed, in to provide it with more physical and chemical properties. To verify that the grafting was successful, the samples were analyzed and characterized by attenuated total reflectance, by Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. The grafted samples showed greater hydrophilicity and affinity with drugs, as well as a critical solution temperature between 33 and 40 °C; therefore, this material was implemented as administrator of AgNPs in controlled doses, thus obtaining a material with greater absorption, anti-inflammatory and with antimicrobial characteristics.

Bio-reduction agents are being explored to synthesised nanoparticles to minimize the effects of toxic chemicals. The present study was focused on green approach for the synthesis of zinc oxide nanoparticles using aqueous seeds extract of Papaver somniferum. The biosynthesised ZnO NPs (27.8nm) were characterized by using of spectroscopy and microscopy instruments. The surface morphology and the structural analysis confirms the formation of hexagonal nanostructure and a pure zincite nature of ZnO nanoparticles (NPs) respectively. The EDS spectrum confirms pure ZnO NPs were synthesised. From electrochemical properties, the CV indicates both anodic and cathodic sweep are quasi-reversible properties whose intensity increases with the scan rates. The bode plot shows the maximum angles of 74o which is an indication of a higher conductivity of ZnO NPs.

An atmospheric pressure microwave plasma tubular furnace apparatus (MPTF) for the rapid synthesis of carbon nanotubes (CNTs) has been developed. CNTs have been synthesized by an Argon-Hydrogen microwave plasma using ethanol vapor as carbon source with the furnace temperature of 800 °C at the atmospheric pressure. The synthesized CNTs have been analyzed by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and are shown to be multi-walled and tangled and chemically connected to form a high-density network with the diameter at the range of 25-70 nm. The measurement of X-ray photoelectron spectroscopy (XPS) indicates that a large number of oxygenated functional groups grown on the surface of CNTs. These properties proved that the CNTs could be utilized as nanoscale templates for various applications.

Iron aluminide intermetallic alloys are of great importance in many industries due to their excellent oxidation resistance, low cost, low density, resistance to corrosion and good ductility at room temperature. However, these alloys suffer limited room temperature ductility above 873 K. In this paper, a molecular dynamics-based LAMMPS-EAM was used to model Fe50-XMXAl doped systems with either Ag, Pt or Pd. The lattice side preferences of the dopant were deduced from their energy landscape, and Fe sub-lattices showed promising properties. It was found that the addition of Ag, Pt and Pd enhances the stability of Fe50-XMXAl composition. More importantly, Ag and Pd doped systems gave comparable transition temperatures to experimental findings of 1273 K and 1073 K, respectively. Their thermodynamic and the mechanical stability trends showed promising properties for industrial applications, displaying stability at a high temperature below 1300 K.

The most promising candidate as an everyday alternative to lithium-ion batteries (LIBs) are sodium-ion batteries (NIBs). This is not only due to Na abundance, but also because the main principles and cell structure are very similar to LIBs. Due to these benefits, NIBs are expected to be used in applications related to large-scale energy storage systems and other applications not requiring top-performance in terms of volumetric capacity. One important issue that has hindered the large scale application of NIBs is the anode material. Graphite and silicon, which have been widely applied as anodes in NIBs, do not show great performance. Hard carbons look very promising in terms of their abundance and low cost, but they tend to suffer from instability, in particular over the long term. In this work we explore a carbon-coated TiO2 nanoparticle system that looks very promising in terms of stability, abundance, low-cost, and most importantly that safety of the cell, since it does not suffer from potential sodium plating during cycling. Maintaining a nano-size and consistent morphology of the active material is a crucial parameter for maintaining a well-functioning cell upon cycling. In this work we applied Anomalous Small Angle X-Ray Scattering (ASAXS) for the first time at the Ti K-edge of TiO2 anatase nanoparticles on different cycled composite electrodes in order to have a complete morphological overview of the modifications induced by sodiation and desodiation. This work also demonstrates for the first time that the nanosize of the TiO2 is maintained upon cycling, which is in agreement with the electrochemical stability.

Porous three-dimensional (3D) scaffolds are promising treatment options in regenerative medicine. Supercritical and dense-phase fluid technologies provide an attractive alternative to solvent-based scaffold fabrication methods. In this work, we report on the fabrication of poly-etheresterurethane (PPDO-PCL) based porous scaffolds with tailorable pore size, porosity, and pore interconnectivity by using supercritical CO2 (scCO2) fluid-foaming. The influence of the processing parameters such as soaking time, soaking temperature and depressurization on porosity, pore size, and interconnectivity of the foams were investigated. The average pore diameter could be varied between 100–800 μm along with a porosity in the range from (19 ± 3 to 61 ± 6)% and interconnectivity of up to 82%. To demonstrate their applicability as scaffold materials, selected foams were sterilized via ethylene oxide sterilization. They showed negligible cytotoxicity in tests according to DIN EN ISO 10993-5 and 10993-12 using L929 cells. The study demonstrated that the pore size, porosity and the interconnectivity of this multi-phase semicrystalline polymer could be tailored by careful control of the processing parameters during the scCO2 foaming process. In this way, PPDO-PCL scaffolds with high porosity and interconnectivity are potential candidate materials for regenerative treatment options.