The ongoing coronavirus disease 2019 (COVID-19) pandemic is of global concern and has recently emerged in the US. In this paper, we construct a stochastic variant of the SEIR model to estimate a quasi-worst-case scenario prediction of the COVID-19 outbreak in the US West and East Coast population regions by considering the different phases of response implemented by the US as well as transmission dynamics of COVID-19 in countries that were most affected. The model is then fitted to current data and implemented using Runge-Kutta methods. Our computation results predict that the number of new cases would peak around mid-April 2020 and begin to abate by July provided that appropriate COVID-19 measures are promptly implemented and followed, and that the number of cases of COVID-19 might be significantly mitigated by having greater numbers of functional testing kits available for screening. The model is also sensitive to assigned parameter values and reflects the importance of healthcare preparedness during pandemics.

Agricultural intensification within forage systems has reduced grassland floral diversity by promoting ryegrass (Lolium spp.), damaging soil functionality which underpins critical ecosystem services. Diverse forage mixtures may enhance environmental benefits of pastures by decreasing nutrient leaching, increasing soil carbon storage, and with legume inclusion, reduce nitrogen fertilizer input. This UK study reports on how species-rich forage mixtures affect soil carbon, phosphorus, and nitrogen at dry, medium and wet soil moisture sites, compared to ryegrass monoculture. Increasing forage mixture diversity (from 1 to 17 species) affected soil carbon at the dry site. No effect of forage mixture on soil phosphorus was found, while forage mixture and site did interact to affect soil nitrate/nitrite availability. Results suggest that forage mixtures could be used to improve soil function, but longer-term studies are needed to conclusively demonstrate environmental and production benefits of high-diversity forages.

Denture-related stomatitis caused by Candida spp. affects elderly individuals using partial/total prosthesis, provoking several discomforts including burning sensation and altered taste. Herein, we have studied 52 denture-wearing individuals (>60 years-old), attended at the dentistry clinic of UNIVALE, aiming to isolate Candida spp. directly from the stomatitis lesions and to evaluate their potential to produce virulence attributes. A low prevalence of denture-related stomatitis was reported in these patients (4/52; 7.7%). Candida albicans was isolated in the 4 selected patients, with the ability to form biofilm over a polystyrene surface and to produce aspartic protease, esterase and hemolysin. However, neither phospholipase nor caseinase activities were detected. Planktonic-growing yeasts were susceptible to amphotericin B and caspofungin, while the susceptibility to azoles (fluconazol, itraconazole and voriconazole) varied depending on either the isolate or antifungal. Relevantly, biofilm-forming C. albicans cells exhibited resistance to all studied antifungals. So, new effective drugs against resistant C. albicans isolates causing denture-related stomatitis are urgently required.

During summer 2020, observations of the mesosphere using a 53.5 MHz radar on Svalbard, at 78.2°N 15.1°E, revealed the well-known Polar Mesospheric Summer Echoes (PMSE). At the same time, a co-located meteor detection radar, operating at 31 MHz detected corresponding echoes very distinct from those associated with meteor trails. Comparing as many days as possible during 2020, incontestable evidence arose to demonstrate that the meteor detection radar was capable of observing PMSE, although not in the optimised fashion of the 53.5 MHz system. We present examples of results from both systems, supplementing the earlier findings of Swarnalingam et al. (2009), and simultaneously show very first results from this particular geographical location.

Bisphenol-A (BPA) is associated with adverse health outcomes and is found in many canned foods. It is not understood if some BPA contamination can be washed away by rinsing. The objective of this single-blinded crossover experiment was to determine whether BPA exposure, as measured by urinary concentrations, could be decreased by rinsing canned beans prior to consumption. Three types of hummus were prepared from dried beans, rinsed, and unrinsed canned beans. Fourteen healthy participants ate two samples of each hummus over six experimental days and collected spot urine specimens for BPA measurement. The geometric mean BPA levels for dried beans BPA (GM = 0.97 ng/ml, 95%CI = 0.74,1.26) was significantly lower than rinsed (GM = 1.89 ng/ml, 1.37,2.59) and unrinsed (GM = 2.46 ng/ml, 1.44,4.19). Difference-in-difference estimates showed an increase in GM BPA from pre- to post-hummus between unrinsed and rinsed canned beans of 1.39 ng/ml, p-value = 0.0400. Rinsing canned beans was an effective method to reduce BPA exposure.

Understanding individual differences in attitudes to autism is crucial for improving attitudes and reducing stigma towards autistic people, yet there is limited and inconsistent research on this topic. This is compounded by a lack of appropriate measures and multivariate analyses. Addressing these issues, using up-to-date measures and multiple linear regression, we examined the relative contributions of participant age, sex, autism knowledge, level of contact with autistic people, and autistic traits to attitudes towards autistic people. We found that greater autism knowledge and higher levels of contact, but no other variables, were uniquely predictive of attitudes towards autistic people. We conclude that, in addition to public awareness campaigns to raise knowledge of autism, it may be important to increase contact between autistic and non-autistic people to improve public attitudes towards autistic people.

Organo-modified clay nanoparticles were mixed at 1 and 5 wt% concentrations with a molten blend of 75 wt% of polylactide (PLA) and 25 wt% poly[(butylene adipate)-co-terephthalate] (PBAT). Three mixing strategies were used to control the localization of nanoclay. Small amplitude oscillatory shear (SAOS) and stress growth tests were conducted to clarify the nanoclay interactions with the blend components and its effect on the molecular relaxation behavior. SAOS and weighted relaxation spectra properties were determined before and after pre-shearing at a rate of 0.01 s−1. Molecular relaxation and its characteristics were influenced by PLA degradation, PBAT droplet coalescence, and nanoclay localization.

This manuscript reports structure–function studies of Catechol 2,3-dioxygenase (C23O64), which is the second enzyme in the metabolic degradation pathway of 3-nitrotoluene by Diaphorobacter sp. strain DS2. The recombinant protein is a ring cleavage enzyme for 3-methylcatechol and 4-methylcatechol products formed after dioxygenation of the aromatic ring. Here we report the substrate-free, substrate-bound, and substrate-analog bound crystal structures of C23O64. The protein crystallizes in the P6(2)22 space-group. The structures were determined by molecular replacement and refined to resolutions of 2.4, 2.4, 2.2 Å, respectively. A comparison of the structures with related extradiol dioxygenases showed 22 conserved residues. A comparison of the active site pocket with catechol 2,3-dioxygenase (LapB) from Pseudomonas sp KL28 and homoprotocatechuate 2,3-dioxygenase (HPCD) from Brevibacterium fuscum shows significant similarities to suggest that the mechanism of enzyme action is similar to HPCD.

Potential clinically significant life-threatening drug–drug interactions (DDIs) of lopinavir (LPV) and ritonavir (RTV) used in the treatment of COVID-19 is not systematically reviewed. It was aimed to identify severe DDI pairs of LPV/RTV from international resources predicted to cause life-threatening adverse drug reactions (ADRs). Severe DDI pairs predicted to cause life-threatening ADRs were identified from the FDA and Liverpool COVID-19 prescribing information of LPV/RTV. In total, 62 severe DDI pairs were identified from the FDA and Liverpool COVID-19 resources predicted to cause life-threatening ADRs in patients with COVID-19. Of these, seven unique DDI pairs (11.3%; 95% CI 3%–19%) were identified from the FDA only whereas 45 unique DDI pairs (72.6%; 95% CI 61%–84%) were identified from the Liverpool COVID-19 drug interactions resource. Of interest, only 10 DDI pairs (16.1%; 95% CI 7%–25%) were recognized by both of these drug interaction resources. Clinicians should not entirely rely on any individual DDI resource for checking life threatening ADRs of LPV/RTV in patients with COVID-19.

The relationship between zoo animals, particularly nonhuman primates, and visitors is complex and varies by species. Adding complexity to this relationship is the trend for zoos to host events outside of normal operating hours. Here, we explored whether a late-night haunted-house style event influenced the behavior of spider monkeys. We conducted behavioral observations both on event nights and nights without the event. The spider monkeys were active and outside more frequently on event nights compared to the control nights indicating that their typical nighttime behavior was altered. However, it is difficult to definitively conclude whether the behavioral changes were a result of the event being aversive or enriching. Our findings suggest that zoos should conduct behavioral observations of and collect physiological data from their animals, especially if they are sensitive to environmental changes, when implementing new events, including those occurring outside of normal operating hours to ensure high levels of animal welfare.

Green–Griffiths–Kerr introduced Hodge representations to classify the Hodge groups of polarized Hodge structures, and the corresponding Mumford–Tate subdomains. We summarize how, given a fixed period domain $ \mathcal{D} $ , to enumerate the Hodge representations and corresponding Mumford–Tate subdomains $ D \subset \mathcal{D} $ . The procedure is illustrated in two examples: (i) weight two Hodge structures with $ {p}_g={h}^{2,0}=2 $ ; and (ii) weight three CY-type Hodge structures.

Technical challenges associated with telomere length (TL) measurements have prompted concerns regarding their utility as a biomarker of aging. Several factors influence TL assessment via qPCR, the most common measurement method in epidemiological studies, including storage conditions and DNA extraction method. Here, we tested the impact of power supply during the qPCR assay. Momentary fluctuations in power can affect the functioning of high-performance electronics, including real-time thermocyclers. We investigated if mitigating these fluctuations by using an uninterruptible power supply (UPS) influenced TL assessment via qPCR. Samples run with a UPS had significantly lower standard deviation (p < 0.001) and coefficient of variation (p < 0.001) across technical replicates than those run without a UPS. UPS usage also improved exponential amplification efficiency at the replicate, sample, and plate levels. Together these improvements translated to increased performance across metrics of external validity including correlation with age, within-person correlation across tissues, and correlation between parents and offspring.

Entamoeba histolytica is a major cause of dysentery that leads to a high level of morbidity and mortality, especially in developing countries. Calmodulin-like calcium binding protein EhCaBP3 of E. histolytica is directly involved in disease mechanisms with roles in cytoskeleton dynamics and scission during erythrophagocytosis in a calcium dependent fashion. Interestingly, EhCaBP3 is also present in the nucleus of E. histolytica. We have used a transfected cell system to show that EhCaBP3 is capable of calcium dependent nucleocytoplasmic trafficking. Our data confirms and extends recent findings suggesting presence of a calcium dependent nuclear transport pathway in E. histolytica.

The angular power spectrum is a natural tool to analyse the observed galaxy number count fluctuations. In a standard analysis, the angular galaxy distribution is sliced into concentric redshift bins and all correlations of its harmonic coefficients between bin pairs are considered—a procedure referred to as ‘tomography’. However, the unparalleled quality of data from oncoming spectroscopic galaxy surveys for cosmology will render this method computationally unfeasible, given the increasing number of bins. Here, we put to test against synthetic data a novel method proposed in a previous study to save computational time. According to this method, the whole galaxy redshift distribution is subdivided into thick bins, neglecting the cross-bin correlations among them; each of the thick bin is, however, further subdivided into thinner bins, considering in this case all the cross-bin correlations. We create a simulated data set that we then analyse in a Bayesian framework. We confirm that the newly proposed method saves computational time and gives results that surpass those of the standard approach.

Blood-side resistance to oxygen transport in extracorporeal membrane blood oxygenators (MBO) depends on fluid mechanics governing the laminar flow in very narrow channels, particularly the hemodynamics controlling the cell free layer (CFL) built-up at solid/blood interfaces. The CFL thickness constitutes a barrier to oxygen transport from the membrane towards the erythrocytes. Interposing hemicylindrical CFL disruptors in animal blood flows inside rectangular microchannels, surrogate systems of MBO mimicking their hemodynamics, proved to be effective in reducing (ca. 20%) such thickness (desirable for MBO to increase oxygen transport rates to the erythrocytes). The blockage ratio (non-dimensional measure of the disruptor penetration into the flow) increase is also effective in reducing CFL thickness (ca. 10–20%), but at the cost of risking clot formation (undesirable for MBO) for disruptors with penetration lengths larger than their radius, due to large residence times of erythrocytes inside a low-velocity CFL formed at the disruptor/wall edge.

The use of natural pozzolans in concrete applications is gaining more attention because of the associated environmental, economic, and technical benefits. In this study, reference cemented mine backfill samples were prepared using Portland cement, and experimental samples were prepared by partially replacing Portland cement with 10 or 20 wt.% fly ash as a byproduct (artificial) pozzolan or pumice as a natural pozzolan. Samples were cured for 7, 14, and 28 days to investigate uniaxial compressive strength development. Backfill samples containing 10 wt.% pumice had almost a similar compressive strength as reference samples. There is strong potential for pumice to be used in cemented backfill to minimize costs, improve backfill properties, and promote the sustainability of the mining industry.