Ermeloite is a new aluminium phosphate mineral from Galicia, Spain, in the northwest of the Iberian Peninsula. It is the third formally recognised mineral discovered in Galicia since morenosite and cervantite in the 19th Century. The name and symbol (Erm) were approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2021–017a) in recognition of the geographical location where it was found. The mineral occurs as a light blue to white fine aggregate over quartz and microcline associated with wardite. Crystals of ~0.04 mm are transparent and have a waxy lustre. The simplified empirical formula determined using electron microprobe analysis is Al1.02P0.95F0.06O3.88⋅1.06 H2O, which is near to the ideal formula Al(PO4)⋅H2O. The mineral is an alteration product within a phosphate pegmatite. Ermeloite is the second phosphate isostructural with the sulfates of the kieserite group. Single-crystal X-ray diffraction showed that ermeloite crystallises in the monoclinic C2/c space group with cell parameters a = 6.5371(4) Å, b = 7.5670(5) Å, c = 7.1146(5) Å, β = 115.335(2)°, V = 318.08(4) Å3 and Z = 4 at room temperature. Comparative analysis of the crystallographic data, with isostructural phosphates, revealed an interesting behaviour for these compounds.

The matrix of the Pliocene volcaniclastics from the Akrotiri area of the Santorini island (Greece) is dominated by clinoptilolite. Smectite, occasionally illite-smectite, opal-CT, cristobalite and mordenite are also present. The clinoptilolite-rich samples were heated at 460 and 560°C for 12 h and the reductions in the intensity of the 020 diffraction peak were measured. Electron microprobe analysis (EMPA) was then used to study the chemical composition of the clinoptilolite. Statistical analysis proved a strong and quantifiable relationship between the reduction of the 020 diffraction peak of the clinoptilolite and the Na/K ratio. A representative set of microprobe analyses of clinoptilolite was performed before any correlation with thermal behavior was attempted. The presence of K in the structure of clinoptilolite as well as its relationship with Na are most important in the thermal behavior of clinoptilolite.

The cation exchange capacities (CEC) and extractable cations in smectite, corrensite and palagonitized glass from hydrothermally-altered pillow lavas and hyaloclastite breccias were measured by both bulk wet chemical and in situ microanalytical techniques. Smectite has CEC's between 60 and 120 meq/100 g, palagonitized glass between 30 and 60 meq/100 g, and corrensite approximately 35 meq/100 g as determined by the in situ CsCl-exchange method. These experiments generally verify that Cs exchanges for those cations that are presumed (from the stoichiometry implied by microprobe analyses) to occupy interlayer sites in sheet silicates. Results of conventional CEC determinations are consistent with those determined by the in situ experiments: the individual microanalytical values for smectite and palagonitized glass bracket the bulk CEC values. The in situ experiments imply that Mg is the major extractable cation in smectite, Ca in corrensite, and both Mg and Ca in the palagonitized glass. We speculate that discrepancies between the equivalents of extractable cations predicted from elemental analysis and the equivalents of Cs sorbed may be due to the presence of charge-balancing protons that are not detected by the microprobe analyses. The sum of equivalents of cations extracted by NH4-acetate is about the same as the CEC determined by both the in situ and the bulk methods. Cation proportions indicated by NH4-acetate extractions from bulk samples are also generally consistent with the in situ results for all elements except Mg, which is a minor leachate of the NH4-acetate extractions in all the samples. To explain this discrepancy, we propose that 1) Mg may occupy structural sites within palagonitized glass, which inhibit its extraction by NH4 or Cs, and/or 2) there is a significant quantity of smectite, unsampled by the electron microprobe analyses, which contains insignificant interlayer Mg.

Solid phase transformation and metal solubility were monitored after coprecipitation of Cd2+, Cu2+, Pb2+ and Zn2+ with Fe3+ to form ferrihydrite by titration to pH 6. The (co)precipitates were aged at room temperature for up to 200 d and subsequently heated for 60 d at 70 °C. The mode of (co)precipitate formation, rapid and slow titration, was also investigated. Metal solubility was measured by anodic stripping voltammetry. Surface area, Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analysis were used to follow the transformation of ferrihydrite after initial (co)precipitation. Electron microprobe analysis (EMPA) was used to show the distribution of metals within ferrihydrite aggregates. Thermal treatment produced a reduction in soluble Cd2+ and Zn2+, whereas Pb2+ appeared to be expelled from the solid phase. The more stable coprecipitate (formed by slow titration) maintained a constant Cu2+ solubility after thermal treatment. Characterization of the solid phase by XRD indicated that the presence of low levels of metals did not affect the initial or final transformation products, although metals present during the slow titration seemed to stabilize a higher surface area material. The rapid titration resulted in a less ordered (1-line) ferrihydrite than the slow titration (9-line). Furthermore, FTIR analysis indicated that the presence of metals promoted the formation of mixed (microcrystalline) end-products. The initial coprecipitation products seem to determine the final thermal transformation products. These transformation products include ferrihydrite, hematite (Hm), and goethite (Gt)- and lepidocrocite-like microcrystalline structures. Although experimental conditions were favorable for the homogeneous distribution of metals throughout the coprecipitate, EMPA suggests that Cu and Zn segregation within aggregates of Fe oxides occurs.

Stichtite is a naturally occurring layered double hydroxide (LDH) with the ideal chemical formula Mg6Cr2CO3(OH)16.4H2O. It has received less attention in the literature than other LDHs and is often described as a rare mineral; however, abundant deposits of the mineral do exist. In this article we aim to review a number of significant publications concerning the mineral stichtite, including papers covering the discovery, geological origin, synthesis and characterizsation of stichtite. Characterization techniques reviewed include powder X-ray diffraction (XRD), infrared spectroscopy (IR), near infrared spectroscopy (NIR), Raman spectroscopy (Raman), thermogravimetry (TG) and electron microprobe analysis.

Two crystals from a sample of titanite from the Heftetjern granitic pegmatite, Tørdal, southern Norway, were extracted for structure analysis and shown to have triclinic symmetry. Unit-cell parameters are as follows: a = 7.0696(4) Å, b = 8.7167(5) Å, c = 6.5695(3) Å, α = 89.7372(11)°, β = 113.7607(10)°, γ = 90.2929(13)°, V = 370.52(6) Å3 for one crystal and a = 7.0612(5) Å, b = 8.7102(6) Å, c = 6.5628(4) Å, α = 89.7804(16)°, β = 113.7713(13)°, γ = 90.2502(16)°, V = 369.39(7) Å3 for the other. The interaxial angles α and γ deviate from the value of 90° required for monoclinic symmetry by ~200–250 standard deviations. The single-crystal X-ray intensities were averaged in both monoclinic and triclinic Laue symmetries, giving R(merge) values of ~14% and ~1.3% respectively. For both crystals, more than 50 reflections with I > 3σI violated the criterion for the presence of the a-glide required for monoclinic A2/a symmetry. Both crystals were refined in the space group A with Z = 4, and final R1 indices are 4.4% and 4.7% (wR2 = 8.4 and 8.9%) respectively. The composition of one crystal was determined by electron microprobe analysis: Ca[Ti0.623Ta0.105Nb0.018Al0.137Fe0.0463+Sn0.0834+]Σ=1.012(SiO4)O. The characteristic corner-sharing [MO5] chains of identical octahedra observed in monoclinic titanite become chains of alternating M(1) and M(2) octahedra of different size, with the stronger X-ray scattering constituents concentrated at the M(2) site. Short-range bond-valence considerations suggest that the M cations will order as Al—O—Ta in adjacent octahedra, and when present in sufficient amounts, will couple along the chain to break long-range monoclinic symmetry.

Bobmeyerite, Pb4(Al3Cu)(Si4 O12)(S0.5Si0.5O4)(OH)7 Cl(H2O)3, is a new mineral from the Mammoth - Saint Anthony mine, Tiger, Pinal County, Arizona, USA. It occurs in an oxidation zone assemblage attributed to progressive alteration and crystallization in a closed system. Other minerals in this assemblage include atacamite, caledonite, cerussite, connellite, diaboleite, fluorite, georgerobinsonite, hematite, leadhillite, matlockite, murdochite, phosgenite, pinalite, quartz, wulfenite and yedlinite. Bobmeyerite occurs as colourless to white or cream-coloured needles, up to 300 m m in length, that taper to sharp points. The streak is white and the lustre is adamantine, dull or silky. Bobmeyerite is not fluorescent. The hardness could not be determined, the tenacity is brittle and no cleavage was observed. The calculated density is 4.381 g cm-3. Bobmeyerite is biaxial (-) with α ≈ β = 1.759(2), γ = 1.756(2) (white light), it is not pleochroic; the orientation is X = c; Y or Z = a or b. Electron-microprobe analyses provided the empirical formula Pb3.80Ca0.04Al3.04Cu2+0.96Cr3+0.13Si4.40S0.58O24.43Cl1.05F0.52H11.83. Bobmeyerite is orthorhombic (pseudotetragonal), Pnnm with unit-cell parameters a = 13.969(9), b = 14.243(10), c = 5.893(4) Å, V = 1172.5(1.4) Å3 and Z = 2. The nine strongest lines in the X-ray powder diffraction pattern, listed as [dobs (Å)(I)(hkl)], are as follows: 10.051(35)(110); 5.474(54)(011,101); 5.011(35)(220); 4.333(43)(121,211); 3.545(34)(040,400); 3.278(77)(330,231,321); 2.9656(88)(141,002,411); 2.5485(93)(051,222,501); 1.873(39)(multiple). Bobmeyerite has the same structural framework as cerchiaraite and ashburtonite. In the structure, which refined to R1 = 0.079 for 1057 reflections with F > 4σF, SiO4 tetrahedra share corners to form four-membered Si4O12 rings centred on the c axis. The rings are linked by chains of edge-sharing AlO6 octahedra running parallel to [001]. The framework thereby created contains large channels, running parallel to [001]. The Cl site is centred on the c axis alternating along [001] with the Si4O12 rings. Two non-equivalent Pb atoms are positioned around the periphery of the channels. Both are elevencoordinate, bonding to the Cl atom on the c axis, to eight O atoms in the framework and to two O (H2O) sites in the channel. The Pb atoms are off-centre in these coordinations, as is typical of Pb2+ with stereo-active lone-electron pairs. A (S, Si, Cr)O4 group is presumed to be disordered in the channel. The name honours Robert (Bob) Owen Meyer, one of the discoverers of the new mineral.

The crystal structure of mendeleevite-(Ce), (Cs,☐)6(☐,Cs)6(☐,K)6(REE,Ca,☐)6(Si70O175) (H2O,OH,F,D)35, a new mineral from the moraine of the Darai-Pioz glacier, the Alai mountain ridge. Tien-Shan mountains, northern Tajikistan, was solved by direct methods and refined to Ri = 4.15% based on 2274 observed [Fo > 4σ|F|] unique reflections measured with Mo-Kα. radiation on a Bruker PA diffractorneter equipped with a CCD detector. Mendeleevite-(Ce) is cubic, space group Pm3̄, a 21.9148(4) Å, V 10525(1) Å3, Z = 2, Dcalc = 3.066 g/cm3. The empirical formula (electron microprobe) is CS5.94K2.22[(Ce11.35La5.86Nd3.23Pr1.54Sm0.32Gd0.20)Σ22.50(Ca4.68Sr1.00)Σ5.68]Σ28.18 Si70.12O203.17H45.67F6.83, Z = 2, calculated on the basis of 210 (O + F) a.p.f.u., with H2O and OH calculated from structure refinement (OH + F = 17 p.f.u.; H2O = 17.75 p.f.u.).

The structural formula is (Cs4.65☐1.35)Σ6(☐4.71Cs1.29)Σ6(☐3.78K2.22)Σ6﹛[(Ce11.35La5.86Nd3.23 Pr1.54Sm0.32Gd0.20)Σ22.50(Ca4.68Sr1.00)Σ5.68]Σ28.18☐1.82﹜Σ30(Si70O175)[(OH)10.17F6.83]Σ17(H2O)17.75. Simplified and endmember formulae are as follows: (Cs,☐)6(☐,Cs)6(☐,K)6(REE,Ca,☐)30(Si70O175) (H2O,OH,F,☐)35 and Cs6(REE22Ca6)(Si70O175)(OH,F)14(H20)21. The crystal structure of mendeleevite-(Ce) is an intercalation of two independent Si—O radicals and an M framework of (REE,Ca) polyhedra. The Si—O radicals are an (Si140O260)104– framework and an (Si36O90)36– cluster which do not link directly. The M framework is located between the Si—O framework and the Si—O clusters. Interstitial cations occupy two types of cages and channels. Cages I and II are 78 and 22% occupied by Cs. Channels along [100↻] contain K atoms and H2O groups. Mendeleevite-(Ce) has no natural or synthetic structural analogues. Mendeleevite-(Ce) is a framework mineral with large cavities and it has the potential to be used as a model for the synthesis of microporous materials of industrial interest.

Davidlloydite, ideally Zn3(AsO4)2(H2O)4, is a new supergene mineral from the Tsumeb mine, Otjikoto (Oshikoto) region, Namibia. It occurs as elongated prisms (∼10:1 length-to-width ratio) that are flattened on {010}, and up to 100 × 20 × 10 μm in size. The crystals occur as aggregates (up to 500 μm across) of subparallel to slightly diverging prisms lying partly on and partly embedded in fine-grained calcioandyrobertsite. Crystals are prismatic along [001] and flattened on {010}, and show the forms {010} dominant and {100} subsidiary. Davidlloydite is colourless with a white streak and a vitreous lustre; it does not fluoresce under ultraviolet light. The cleavage is distinct on {010}, and no parting or twinning was observed. The Mohs hardness is 3 – 4. Davidlloydite is brittle with an irregular to hackly fracture. The calculated density is 3.661 g cm–3. Optical properties were measured with a Bloss spindle stage for the wavelength 590 nm using a gel filter. The indices of refraction are α = 1.671, β = 1.687, γ = 1.695, all ±0.002; the calculated birefringence is 0.024; 2Vobs = 65.4(6)°, 2Vcalc = 70°; the dispersion is r < v, weak; pleochroism was not observed. Davidlloydite is triclinic, space group P1, with a = 5.9756(4), b = 7.6002(5), c = 5.4471(4) Å, α = 84.2892(9), β = 90.4920(9), γ = 87.9958(9)°, V = 245.99(5) Å3, Z = 1 and a:b:c = 0.7861:1:0.7167. The seven strongest lines in the X-ray powder diffraction pattern [listed as d (Å), I, (hkl)] are as follows: 4.620, 100, (011, 10); 7.526, 71, (010); 2.974, 49, (200, 01); 3.253, 40, (021, 120); 2.701, 39, (10, 002, 1); 5.409, 37, (001); 2.810, 37, (210). Chemical analysis by electron microprobe gave As2O5 43.03, ZnO 37.95, CuO 5.65, H2O(calc) 13.27, sum 99.90 wt.%. The H2O content and the valence state of As were determined by crystal structure analysis. On the basis of 12 anions with H2O = 4 a.p.f.u., the empirical formula is (Zn2.53Cu0.39)Σ2.92As2.03O8(H2O)4.

The crystal structure of davidlloydite was solved by direct methods and refined to an R1 index of 1.51% based on 1422 unique observed reflections collected on a three-circle rotating-anode (MoKα radiation) diffractometer equipped with multilayer optics and an APEX-II detector. In the structure of davidlloydite, sheets of corner-sharing (As5+O4) and (ZnO4) tetrahedra are linked by ZnO2(H2O)4 octahedra. The structure is related to that of parahopeite.

Fluoro-aluminoleakeite, ideally , is a new mineral of the amphibole group from Norra Kärr, Sweden (IMA-CNMMNC 2009-012). It occurs in a proterozoic alkaline intrusion that mainly comprises a fine-grained schistose agpaitic nepheline-syenite (grennaite). Fluoro- aluminoleakeite occurs as isolated prismatic crystals 0.10–2 mm long in a syenitic matrix. Crystals are light greenish-blue with a greenish-blue streak. It is brittle, has a Mohs hardness of 6 and a splintery fracture; it is non-fluorescent with perfect {110} cleavage, no observable parting, and has a calculated density of 3.14 g cm–3. In plane-polarized light, it is pleochroic, X = pale green, Y = dark green, Z = pale green; X ^ a = 62.9° (in β obtuse), Y || b. Fluoro-aluminoleakeite is biaxial negative, α = 1.632(1), β = 1.638(1), γ = 1.643(1); 2Vobs. = 98.0(4)°, 2Vcalc. = 95.5°.M

Fluoro-aluminoleakeite is monoclinic, space group C2/m, a = 9.7043(5) Å, b = 17.7341(8) Å, c = 5.2833(3) Å, β = 104.067(4)°, V = 882.0(2) Å3, Z = 2. The eight strongest X-ray diffraction lines in the powder-diffraction pattern are [d in Å, (I), (hkl)]: 2.687, (100), (31, 151); 4.435, (80), (021, 040); 3.377, (80), (131); 2.527, (60), (02); 8.342, (50), (110); 3.096, (40), (310); 2.259, (40), (71, 12) and 2.557, (30), (002, 061). Analysis, by a combination of electron microprobe and crystal-structure refinement, gives SiO2 58.61, Al2O3 7.06, TiO2 0.32, FeO 3.27, Fe2O3 6.05, MgO 8.61, MnO 0.73, ZnO 0.43, CaO 0.05, Na2O 9.90, K2O 2.43, Li2O 1.62, F 3.37, H2Ocalc. 0.50, sum 101.08 wt.%. The formula unit, calculated on the basis of 24 (O,OH,F,Cl) p.f.u. with (OH) + F = 2 a.p.f.u., is A(Na0.65 O22W(F1.47OH0.53)Σ=2.00. Crystal-structure analysis shows CLi to be completely ordered at the M(3) site, and provided reliable site populations. Fluoro-aluminoleakeite is related to the end-member leakeite, , by the substitutions CFe3+ → CAl and WF → W(OH).

A multidisciplinary approach has been used to study Au occurrences within pyrite and arsenopyrite in four refractory Au ores from Colombia, France (Le Châtelet and Villeranges) and Portugal (Neves Norte). The Au was characterized by optical and scanning electron microscopy and analysed using electron and ion microprobes to determine Au distribution, with particular attention to spectral interferences in electron and ion microprobes, background measurements in electron probes, and quantitative analysis using external standardization in ion probes. The ionic emission rate is proven to be dependent on the Au status; combined Au has a greater ion emission than metallic Au. Invisible Au occurrences are closely linked to As distribution. Gold bonding in arsenopyrite, examined by transmission electron microscopy, is shown to be dispersed within the FeAsS crystal structure. Typical growth patterns and As-Au diffusion zoning in pyrite and arsenopyrite may account for the very irregular distribution of Au in these minerals.

The crystal structure of comancheite, Hg2+55N3–24(OH, NH2)4(Cl,Br)34, orthorhombic, space group Pnnm, a = 18.414(5), b = 21.328(6), c = 6.6976(19) Å, V = 2630(2) Å3, Z = 1, was solved by direct methods and refined to an R1 index of 4.3% based on 4160 unique observed reflections. In the structure of comancheite, there are nine crystallographically distinct Hg2+ cations, each of which is coordinated by two N3– anions to form near-linear N3––Hg2+–N3– groups. Four other crystallographically distinct Hg2+ cations are coordinated by a mixture of N3–, O2–, (OH)– and (NH2)– anions, and there is a small amount of [Hg–Hg]2+ dimer. In addition, there are eight crystallographically distinct halogen sites, three of which are completely occupied by Cl–, and five of which are occupied by both Cl– and Br–. The principal anion, N3–, shows a strong preference for tetrahedral coordination by Hg2+, which results in a strongly bonded three-dimensional {–Hg2+–N3––} framework. This framework is both interrupted and contains large interstices that incorporate additional Hg2+ cations, a very small amount of [Hg+–Hg+]2+ dimer and additional anion species, O2–, (OH)– and (NH2)–, that coordinate Hg2+.

Comancheite was described originally as an Hg-oxide mineral. The major change in chemical composition indicated by the present work was approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (Voting Proposal 13-B). The presence of N provides some analytical challenges, particularly in the presence of Hg. New bond-valence parameters were derived for Hg2+–N3– bonds [Ro(N3–) = 1.95] using well refined Hg2+ structures, and this allows discrimination between Hg2+–O2– and Hg2+–N3– bonds based on the valence-sum rule. Comparison of the Raman spectra of several Hg-bearing minerals shows that peaks in the range 500–700 cm–1 are characteristic of Hg2+–N3– stretching vibrations whereas peaks in the range 350–500 cm–1 are characteristic of Hg2+–O2– stretching vibrations; Hg2+–O2– and Hg2+ – N3– bonds may be discriminated on this basis.

Schlüterite-(Y), ideally (Y,REE)2Al(Si2O7)(OH)2F, is a new silicate mineral species from the Stetind pegmatite, Tysfjord, Nordland, Norway. It forms dense, fibrous, radiating aggregates (up to ∼2 mm) diverging to individual needle-like crystals (up to ∼1 mm long) in cavities. Crystals are acicular to bladed, flattened on {001} and elongated along [010], and the dominant form is {001}. Schlüterite-(Y) is transparent, pale pink with a white streak and a vitreous lustre, and does not fluoresce under short-wave ultraviolet light. Mohs hardness is 5½–6, and schlüterite-(Y) is brittle with an irregular fracture, and has no cleavage. The calculated density is 4.644 g/cm3. The indices of refraction are α = 1.755, β = 1.760, γ = 1.770, all ± 0.005, 2Vobs = 71.8 (5)°, 2Vcalc = 71°, non-pleochroic, optic orientation is X ˆ a = 83.1° (β obtuse), Y//b, Z ˆ c = 50.3° (β acute). Schlüterite-(Y) is monoclinic, space group P21/c, a 7.0722(2), b 5.6198(1), c 21.4390(4) Å, β 122.7756(3)°, V 716.43(5) Å3, Z = 4. The seven strongest lines in the X-ray powder-diffraction pattern are as follows: [d (Å), I, (hkl)]: 4.769, 100, (012); 2.972, 55, (14); 3.289, 51, (112); 2.728, 49, (16); 2.810, 37, (020); 3.013, 37, ((16); 4.507, 36, (004). Chemical analysis by electron microprobe gave SiO2 22.64, Al2O3 9.45, Y2O3 15.35, La2O3 3.25, Ce2O3 9.69, Pr2O3 2.05, Nd2O3 9.50, Sm2O3 3.57, Gd2O3 4.65, Dy2O3 4.21, Er2O3 2.31, Yb2O3 1.86, F 2.71, H2Ocalc 3.78, O = F −1.14, sum 93.88 wt%. The H2O content was determined by crystal-structure analysis. On the basis of 10 anions with (OH) + F = 3 a.p.f.u. (atoms per formula unit), the empirical formula is (Y0.73Ce0.32Nd0.30Gd0.14Dy0.12La0.11Sm0.11Pr0.07Er0.06Yb0.05)Σ=2.01Al0.99Si2.01O7(OH)2.24F0.76. The crystal structure of schlüterite-(Y) was solved by direct methods and refined to an R1 index of 1.8% based on 1422 unique observed reflections. In the structure of schlüterite-(Y), Al(OH)4O2 octahedra share (OH)–(OH) edges to form [MΦ4] chains that are decorated by (Si2O7) groups that bridge O vertices of neighbouring octahedra in a staggered fashion on either side of the chain. These [Al(OH)2(Si2O7)] chains extend parallel to b, and are linked into a continuous framework via bonds to interstitial [8](Y,REE) (= <2.400 Å>) and [9](Y,REE) (= <2.548 Å>) atoms.

The ideal formula for members of the cerchiaraite group is Ba4M4(Si4O12)O2(OH)4Cl2[Si2O3(OH)4], where M represents Mn3+, Fe3+ or Al in the octahedral site. A suffix-based naming scheme is used in which the original cerchiaraite is renamed cerchiaraite-(Mn) and two new minerals are named cerchiaraite-(Fe) and cerchiaraite-(Al). The type localities for cerchiaraite-(Fe) are the Cerchiara mine, Liguria, Italy and the Esquire No. 7 and No. 8 claims, Big Creek, Fresno County, California, USA. The type localities for cerchiaraite-(Al) are the Esquire No. 1 claim, Rush Creek, Fresno County, California, USA and the Esquire No. 7 and No. 8 claims noted above. At the Cerchiara mine, cerchiaraite-(Fe) occurs in small fractures and veinlets in a Jurassic ophiolitic sequence. It is of secondary hydrothermal origin and occurs as tan to brown thin prisms and matted fibres. Cerchiaraite(Fe) and cerchiaraite-(Al) from the Esquire No. 1, No. 7 and No. 8 claims occur in parallel-bedded quartz-sanbornite vein assemblages which formed as a result of fluid interaction along the margin of the vein. At the Esquire No. 1, No. 7 and No. 8 claims, both cerchiaraite-(Fe) and cerchiaraite-(Al) occur as subparallel aggregates of blue to bluish green irregular prisms. Both minerals are transparent with a vitreous lustre, Mohs hardness ~4½ , brittle tenacity, irregular fracture and no cleavage. The calculated density of cerchiaraite-(Fe) is 3.710 g cm-3; the measured density of cerchiaraite-(Al) is 3.69(3) g cm-3and the calculated density is 3.643 g cm-3. Cerchiaraite-(Fe) is uniaxial (+), with ω = 1.741(2) and ε = 1.768(2); it is weakly pleochroic and O is colourless and E is yellow. Cerchiaraite-(Al) is uniaxial (-), with ω = 1.695(2) and e = 1.677(2); it is strongly pleochroic and O is colourless and E is blue. Electron-microprobe analyses yielded empirical formulae ranging from (Ba3.82Na0.02Ca0.04)Σ3.88(Fe3+3.42Ti4+0.27Al3+0.25Mn3+0.04Mg0.02)Σ4.00Si5.62O15.47(OH)9.31Cl2.22 (Cerchiara mine) to Ba4.00(Al3+2.40Fe3+1.12Mg0.15Fe2+0.12Mn2+0.06)Σ3.85Si5.78O15.34(OH)8.75Cl2.91 (Esquire No. 1 claim). Cerchiaraite is tetragonal with Z = 2 and crystallizes in space group I4/mmm. The cell parameters for cerchiaraite-(Fe) are a = 14.3554(12), c = 6.0065(5) Å and V = 1237.80(5) Å3; those for cerchiaraite(Al) are a = 14.317(4), c = 6.0037(18) Å and V = 1230.6(6) Å3. In the cerchiaraite-(Fe) structure, SiO4 tetrahedra share corners forming a four-membered Si4O12 ring. The ring is corner-linked to an edgesharing chain of Fe3+ O6 octahedra running parallel to c. A Cl site alternates along c with the Si4 O12 ring. A large channel in the framework contains Ba atoms around its periphery and statistically distributed Si2 O7 silicate dimers and Cl atoms. The strong blue pleochroic colour is attributed to Fe2+ - Fe3+intervalence charge transfer along the octahedral chain.

A second occurrence of ferri-fluoro-leakeite has been identified in the Bratthagen nepheline syenite pegmatite (Vestfold County, Norway). With respect to the holotype found at the Verkhnee Espe deposit (Akjailyautas Mountains, Kazakhstan; Cámara et al., 2010), it is closer to the ideal composition because of its larger Li and Mg contents and the absence of an oxo-component; however, it has a significant Zn content (0.29 a.p.f.u.). The ideal formula of ferri-fluoro-leakeite is ANaBNa2 C(Mg2Fe2 3+Li)TSi8O22WF2 and the empirical formula derived from electron-microprobe analysis and single-crystal structure refinement for the sample used here is A(Na0.68K0.32)S=1.00BNa2.00 C(Mg1.69Mn0.25 2+Fe0.24 2+Zn0.29Al0.23Fe1.50 3+Ti0.02Li0.78)S=5.00TSi8O22W(F1.59(OH)0.41)S=2.00. Unitcell data are a = 9.788(2), b = 17.826(3), c = 5.282(1) Å, β = 104.195(5)°, V = 893.5 (3) Å3, Z = 2. Crystal-chemical analysis shows that Li is ordered at the M(3) site and Zn is ordered mainly at the M(2) site, confirming previous findings for Li-bearing amphiboles. The new data also make quantification of the oxo component in Na amphiboles possible.

A variety of mushroom tourmaline from the Kat Chay mine, Momeik, near Mogok, Shan state, Myanmar, consists of a black-to-grey single-crystal core from which a single prismatic crystal reaches to the edge of the mushroom, forming a slight protuberance. The rest of the mushroom (∼50% by volume) consists of extremely acicular sub-parallel crystals that diverge toward the edge of the mushroom. The acicular crystals are dominantly colourless to white, with a continuous black zone (2 mm across) near the edge, and pale pink outside the black zone. The composition varies from ∼Na0.75Ca0.05(Li0.80Al0.70Fe1.10.Mn0.30Ti0.10)Al6Si6(B03)3O18(OH)3(OH,F) at the base of the mushroom to ∼Na0.60Ca0.06(Li1.00Al1.98Fe0.02)Al6(Si5.35B0.65)(BO3)3O18(OH)3(OH,F) close to the edge at the top of the mushroom. The principal substitutions are: (1) YLi + YAl -> yFe* + yFe* and (2) TB + yAl -> Si + yFe*, but there are five other minor substitutions that are also operative. There are six significant compositional discontinuities at textural boundaries in the mushroom, suggesting that the changes in habit are driven in part by changes in external variables such as T and P, plus possible involvement of new fluid phases.

Cowlesite specimens from nine new occurrences in Northern Ireland and from eight localities previously reported in the literature, were crystal-chemically characterised. The chemical data for a total of 25 samples indicate a composition close to the stoichiometric formula for cowlesite and a very limited compositional range. X-ray powder diffraction spectra were performed on 8 samples. The crystallographic unit cell permit a proper indexing of the X-ray powder diffraction patterns as orthorhombic, unit cell constants close to a 23.3, b 30.6, c 25.0 Å and doubled with respect to those originally reported in literature. The powder pattern and the TG curve arc reported for an unidentified mineral species associated with cowlesite in one of the samples from Northern Ireland.

Non-metamict betafite, a pyrochlore-group mineral with general formula A2−mB2XO6Y(O,OH,F)1−n·pH2O and 2 Ti > Nb+Ta and U > 20% at the A site, has been found at Le Carcarelle, (Latium, Italy). It occurs within miarolitic cavities of a foid-bearing syenitic ejectum enclosed within the pyroclastic formation known as “ignimbrite C”, which belongs to the main effusive phase of the Vico volcanic complex. The host rock is composed of K-feldspar, biotite, augitic clinopyroxene, magnetite and minor sodalite. Electron microprobe analyses gave the following crystal-chemical formula: (Ca1.24Na0.17U0.49REE0.03)Σ=1.93 (Ti1.05Nb0.76Zr0.14Fe0.04Ta0.01)Σ=2.00O6(O,OH). Compared with other occurrences reported in the mineralogical literature, betafite from Le Carcarelle is extremely enriched in U and depleted in Th. Due to its young age of formation (∼150 k.y.), this betafite sample is highly crystalline, thus allowing structure refinement of unheated material. Betafite from Le Carcarelle is cubic Fdm, with a = 10.2637(13) Å, and V = 1081.21(35) Å3, and has a smaller A site (consistent with the higher U content), and a larger and more distorted B site (consistent with the higher Ti content) than calciobetafite from Campi Flegrei, Italy (Mazzi and Munno, 1983). Analysis of the atomic displacement parameters provides evidence for static disorder at the X site.

The crystal structure of byzantievite, Ba5(Ca,REE,Y)22(Ti,Nb)18(SiO4)4[(PO4),(SiO4)]4 (BO3)9O21[(OH),F]43(H2O)1.5, a new mineral from the moraine of the Dara-i-Pioz glacier, the Alai mountain ridge, Tien-Shan Mountains, northern Tajikistan, was solved by direct methods and refined to R1 = 13.14% based on 3794 observed [Fo >4σ|F|] unique reflections measured with Mo-Kα X-radiation on a Bruker P4 diffractometer equipped with a CCD detector. Byzantievite is hexagonal, space group R3, a = 9.1202(2) Å, c = 102.145(5) Å, V = 7358.0(5) Å3, Z = 3, Dcalc. = 4.151 g cm–3. The empirical formula (electron microprobe analysis) is Ba5.05[(Ca8.99Sr0.96Fe2+0.42Na0.20)Σ10.57(Ce3.46La1.54Nd1.20Pr0.30Sm0.26Dy0.41Gd0.32Th0.39U4+0.17)Σ8.05Y3.53]Σ22.15(Ti12.31Nb5.30)Σ17.61(SiO4)4.65(PO4)3.12(BO3)8.89O22.16(OH)38.21F4.89(H2O)1.5, Z = 3, calculated on the basis of 124.5 (O + F) a.p.f.u. The H2O and OH contents were calculated from structure refinement (F + OH = 43 a.p.f.u.; H2O = 1.5 a.p.f.u..), and B was determined by SIMS. The crystal structure is a framework of Ti-Ba-Ca-REE-dominant polyhedra and SiO4, PO4 and BO3 groups. In the crystal structure, there are 50 cation sites, 23 of which are fully occupied and 27 partly occupied: six of the 27 partly-occupied sites are >50% occupied, 21 <50% occupied. The crystal structure of byzantievite is an intercalation of three components, one fully ordered with 100% occupancy of cation sites, and two partly ordered with cation-site occupancies of 67% and 17% respectively. Byzantievite is the only known mineral that contains all three of the oxyanions (BO3), (SiO4) and (PO4) as essential components.

Fluoro-sodic-ferropedrizite, ideally ANaBLi2C()TSi8O22WF2, is a new mineral of the amphibole group from the Sutlug River, Tuva Republic, Russia. It occurs at the endogenic contact of a Li-pegmatite with country rocks near to a diabase dyke and formed by reaction of the pegmatitic melt with the country rock. Fluoro-sodic-ferropedrizite occurs as prismatic to acicular crystals, ranging in length from 0.1–3 cm and widths of up to 50 μm. Crystals occur inparallel to sub-parallel aggregates up to 5 mm across ina matrix of calcite and plagioclase feldspar. Crystals are pale bluish-grey with a greyish-white streak.

Fluoro-sodic-ferropedrizite is brittle, has a Mohs hardness of ~6 and a splintery fracture; it is non-fluorescent with perfect {110} cleavage, no observable parting, and has a calculated density of 3.116 g cm–3. In plane-polarized light, it is pleochroic, X = pale purple-grey, Y = light grey, Z = colourless; X ^ a = 71.2º (in β acute), Y || b, Z ^ c = 83.4º (in β obtuse). Fluoro-sodic-ferropedrizite is biaxial positive, α = 1.642(1), β = 1.644(1), γ = 1.652(1); 2V(obs) = 68.0(3)º, 2V(calc) = 56.4º. Fluoro-sodic-ferropedrizite is monoclinic, space group C2/m, a = 9.3720(4) Å, b = 17.6312(8) Å, c = 5.2732(3) Å, β = 102.247(4)º, V = 851.5(2) Å3, Z = 2. The strongest ten X-ray diffraction lines in the powder patternare (d in Å ,(I),(hkl)): 8.146,(10),(110); 2.686,(9),(151); 3.008,(8),(310); 4.430,(7),(021); 2.485,(6),(02); 3.383,(4),(131); 2.876,(3),(51, 11); 2.199,(3),(12); 4.030,(2),(111) and 3.795,(2),(31). Analysis by a combination of electron microprobe and crystal-structure refinement gives SiO2 59.81, Al2O3 12.66, TiO2 0.09, FeO 10.32, MgO 5.56, MnO 0.73, ZnO 0.17, CaO 0.20, Na2O 2.81, Li2O 4.80, F 2.43, H2Ocalc 1.10, sum = 99.65 wt.%. The formula unit, calculated on the basis of 24(O,OH,F) is A(Na0.68)B(Li1.92Na0.05Ca0.03)C() T(Si7.98Al0.02)O22W(F1.03OH0.97). Crystal-structure refinement shows Li to be completely ordered at the M(3) and M(4) sites. Fluoro-sodic-ferropedrizite, ideally ANaBLi2C()TSi8O22WF2, is related to the theoretical end-member ‘sodic-pedrizite’, ANaBLi2C(Mg2Al2Li)TSi8O22W(OH)2, by the substitutions CFe2+ → CMg and WF → W(OH).