The washing of synthetic materials has been named as the largest contributor of microplastic pollution to our oceans. With the consumption of petrochemical-based synthetic materials expected to grow, due to an increased demand, the release of microplastic fibres to our environments is expected to also accelerate. To combat microplastic fibre release, this study explores source-directed interventions within the design and manufacturing process of textiles to reduce the amount of pollution released from the surface and the edges of the fabric structure. Using standardised wash tests and polyester fabric swatches that were created in-house with systematic structural adjustments, single jersey knit fabrics were shown to release over three times more microplastic pollution than twill woven fabric. This illustrates that increasing the tightness of a fabric could be implemented within the design of fabrics for environmental benefits. Additionally, the laser cutting technique reduced microplastic fibres released by over a third compared to scissor cutting and overlock serging, showing that the edge of the fabric is a significant source of microplastic pollution released during laundering. This research highlights the adaptable and innovative eco-design approaches to clothing production which is necessary to help the sector reach international sustainability targets and regulations.

This study assessed the effects of diet supplementation with industrial processing by-products of acerola (Malpighia emarginata D.C.), cashew (Anacardium occidentale L.) and guava (Psidium guajava L.) fruit on the intestinal health and lipid metabolism of female Wistar rats with diet-induced dyslipidaemia. Female rats were randomly divided into five groups: healthy control, dyslipidaemic control and dyslipidaemic experimental receiving acerola, cashew or guava processing by-products. Fruit processing by-products were administered (400 mg/kg body weight) via orogastric administration for 28 consecutive days. Acerola, cashew and guava by-products caused body weight reduction (3·42, 3·08 and 5·20 %, respectively) in dyslipidaemic female rats. Dyslipidaemic female rats receiving fruit by-products, especially from acerola, presented decreased faecal pH, visceral fat, liver fat and serum lipid levels, as well as increased faecal moisture, faecal fat excretion, faecal Bifidobacterium spp. and Lactobacillus spp. counts and amounts of organic acids in faeces. Administration of the tested fruit processing by-products protected colon and liver from tissue damage (e.g. destruction of liver and colon cells and increased fat deposition in hepatocytes) induced by dyslipidaemic diet. Dietary fibres and phenolic compounds in tested fruit by-products may be associated with these positive effects. The industrial fruit processing by-products studied, mainly from acerola, exert functional properties that could enable their use to protect the harmful effects on intestinal health and lipid metabolism caused by dyslipidaemic diet.

The diet–microbiota–metabolism relationships during pregnancy are mostly unknown. We explored the effect of the habitual diet and adherence to the dietary reference values on gut microbiota composition and diversity. Further, the association of gut microbiota with serum lipidomics and low-grade inflammation was evaluated. Overweight and obese women (BMI 30·7 (sd 4·4) kg/m2, n 100) were studied at early pregnancy (≤17 weeks). Intakes of nutrients were calculated from 3-d food diaries. Faecal microbiota composition was analysed using 16S rRNA gene sequencing. Fasting serum lipidomic profiles were determined by NMR. High-sensitivity C-reactive protein, glycoprotein acetylation (GlycA) and lipopolysaccharide activity were used as markers for low-grade inflammation. The recommended dietary intake of fibre and fat was related to higher gut microbiota richness and lower abundance of Bacteroidaceae. Correlations were observed between gut microbiota richness and GlycA and between a few microbiota genera and serum lipoprotein particles. As a conclusion, adherence to the dietary reference intake of fat and fibre was associated with beneficial gut microbiota composition, which again contributed to lipidomic profile. Higher gut microbiota richness and nutrient intakes were linked to a lower level of low-grade inflammation marker GlycA. This finding offers novel insights and opportunities for dietary modification during pregnancy with potential of improving the health of the mother and the child.

We aimed to examine the relationship between dietary glycaemic index (GI) and glycaemic load of foods consumed, intakes of carbohydrates, sugars and fibre, and the prevalence of depressive symptoms in older adults. Data collected from 2334 participants aged 55+ years and 1952 participants aged 60+ years were analysed. Dietary information was collected using a semi-quantitative FFQ. Depressive symptoms were based on antidepressant use or either the 36-Item Short-Form Survey, which included the Mental Health Index (MHI), or the Center for Epidemiologic Studies Depression-10 Scale. Participants in the highest v. lowest tertile of dietary GI intake had increased odds of depressive symptoms (assessed by the MHI scale), multivariable-adjusted OR 1·55 (95 % CI 1·12, 2·14). Participants in the highest compared with lowest tertile of fruit consumption had reduced odds of prevalent depressive symptoms, multivariable-adjusted OR 0·66 (95 % CI 0·46, 0·95). Total fibre, vegetable fibre and breads/cereal fibre intakes were all inversely associated with the prevalence of depressive symptoms, with global P values of 0·03, 0·01 and 0·03, respectively. Participants in the second v. first tertile of vegetable consumption had 41 % reduced odds of prevalent depressive symptoms, multivariable-adjusted OR 0·59 (95 % CI 0·40, 0·88). We show that dietary GI and fibre intakes as well as consumption of fruits and vegetables are associated with the prevalence of depressive symptoms.

Argentina's annual camelid fibre production is estimated at 60 000 kg for llama (Lama glama), somewhat more than 2 000 kg for guanaco (Lama guanicoe) and about 845 kg for vicuña (Vicugna vicugna). The potential for increasing these amounts is huge considering that barely 30 percent of llamas are shorn and considering the size of the wild camelid population in the country. A compilation of published and unpublished work confirms that almost 50 percent of the llamas are single-coated, about 40 percent have white fleeces and that average fibre diameter is about 22 µm in the main llama production area. In general, there is a wide variation in fleece weights and fibre quality between and within herds. However, a llama fleece classing and pricing system is not yet in place to motivate implementation of breeding programmes. Guanaco and vicuña fleeces are double-coated but the fine undercoat represents more than 80 percent of the fleece weight. The proportion of down fibre remaining after mechanical dehairing is only 50 percent in guanacos and 70 percent in vicuñas. The guanaco undercoat fibre diameter is about 16 µm and vicuña fibre diameter is typically between 13 and 14 µm. Both fibres are relatively short. Research is needed to establish optimum shearing season and shearing frequency that results in fibre quality demanded for handcraft and industry in each of the three species.

In northern Patagonia (Argentina), local goats are reared under extensive production system with low inputs. Approximately 700,000 goats of local breeds (Criolla Neuquina, Colorado Pampeana and others) and 550,000 Angora, which produce cashmere and mohair are being raised by about 6000 small holders. Cashmere has a potential development of 15 tons. Due to considering the high variability in fibre traits, good response to selection is expected. Based on participatory processes, development of handicraft and industrial products are promoted. Mohair production is being improved. Argentina is the world's fourth largest producer of fibre (825 tons). Its current development is promoted by the “Mohair Program”, that based on organisation, use of appropriate technologies for shearing, fibre classification and breeding. The “Program” as a whole sells 10% of total country's production, with fair criteria to determine quality and trade values. Solutions to productive problems have been facilitated by strengthening the organisations and by the participation of producers. Extension and technology transfer contributed to improve quantity and quality of the traditional products. Moreover they focus positively on the traditional productive processes. In the cases: cashmere and mohair producers are strongly connected to land and goats, on which they are dependent. They perceive themselves as valued thus overcoming the restrictions of the system.

The composite fiber materials of polymers (FRP) have physical properties, which are exploited recently for the reinforcement and rehabilitation of the structures, in mechanical, civil engineering and biomedical field, subjected to degradation or default risks. Since a beam without any form of reinforcement will fail when subjected to a relatively small tensile load. Therefore the use of the FRP to strengthen the structures is an effective solution to increase the overall strength technique. In this paper, a new theoretical approach model to estimate shear and peel-off stresses is proposed. Axial stresses and bending moment coupled with shear deformation and thermal effect in an FRP-strengthened beam are considered, including the variation in FRP plate fiber orientation.

Visible (Vis) and near infrared (NIR) reflectance spectroscopy is a rapid and non-destructive technique that has found many applications in assessing the quality of agricultural commodities, including wool. In this study, Vis and NIR spectroscopy combined with multivariate data analysis was investigated regarding its feasibility in predicting a range of fibre characteristics in raw alpaca wool samples. Mid-side samples (n = 149) were taken from alpacas from a range of colours and ages at shearing time over 4 years (2000 to 2004) and subsequently analysed for fibre characteristics such as mean fibre diameter (MFD) and standard deviation (and coefficient of variation), spin fineness, curvature degree (and standard deviation), comfort factor, medullation percentage (by weight and number in white samples only) using traditional reference laboratory testing methods. Samples were scanned in a large cuvette using a FOSS NIRSystems 6500 monochromator instrument in reflectance mode in the Vis and NIR regions (400 to 2500 nm). Partial least squares (PLS) regression was used to develop a number of calibration models between the spectral and reference data. Mathematical pre-treatment of the spectra (second derivative) as well as various combinations of wavelength range were used in model development. The best calibration model was found when using the NIR region (1100 to 2500 nm) for the prediction of MFD, which had a coefficient of determination in cross-validation (R2) of 0.88 with a root mean square standard error of cross validation (RMSECV) of 2.62 μm. The results show the NIR technique to have promise as a semi-quantitative method for screening purposes. The lack of grease in alpaca wool samples suggests that the technique might find ready application as a rapid measurement technique for preliminary classing of shorn fleeces or, if used directly on the animal, the technology might offer an objective tool to assist in the selection of animals in breeding programmes or shows.

Abstract Visible (VIS) and near infrared (NIR) reflectance spectroscopy combined with multivariate data analysis were explored to predict fibre diameter in both clean and greasy Merino wool samples. Fifty clean and 400 greasy wool samples were analysed. Samples were scanned in a large cuvette using a NIRSystems 6500 monochromator instrument by reflectance in the VIS and NIR regions (400 to 2500 nm). Partial least square (PLS) regression was used to develop a number of calibration models between the spectral and reference data. Different mathematical treatments were used during model development. Cross validation was used to assess the performance and avoid overfitting of the models. The NIR calibration models gave a coefficient of determination in calibration (R2) > 0·90 for clean wool samples and a R2 < 0·50 for greasy wool samples. The values for the residual predictive value, RPD (ratio of standard deviation (s. d.) to the root mean square of the standard error of cross validation (RMSECV)) were 3 for clean and 0·6 for greasy wool samples, respectively. The results indicated that fibre diameter in greasy wool samples was poorly predicted with NIR, while clean wool showed good relationships.

More research is required to improve the calibration on greasy wool samples if the technology is to be used for rapid analysis to assist in the selection of animals in breeding programmes.

Dans un premier temps, les phénomènes à l'origine des contraintes résiduelles en injection de thermoplastique sont décrits, avec les spécificités liées aux polymères renforcés de fibres. Le refroidissement hétérogène associé à une variation de comportement mécanique conduit aux contraintes d'origine thermique, auxquelles il faut ajouter les contraintes dues à la pression dans la phase fluide figée par la solidification. Les fibres de renfort introduisent une hétérogénéité et une anisotropie de comportement mécanique et de retrait. Dans un deuxième temps, une méthode de mesure des contraintes résiduelles basée sur l'enlèvement de couches et la mesure des moments de flexion est présentée. Elle permet la mesure des contraintes résiduelles pour des matériaux anisotropes comme les thermoplastiques renforcés de fibres. En général, on obtient des contraintes de traction en cœur, et de compression en peau. L'effet du fraisage pour enlever les couches est évalué. La pression et le temps de maintien, la température de régulation du moule, le taux de fibres influencent les profils de contraintes.

The term microfibril angle (MFA) in wood science refers to the angle between the direction of the helical windings of cellulose microfibrils in the secondary cell wall of fibres and tracheids and the long axis of cell. Technologically, it is usually applied to the orientation of cellulose microfibrils in the S2 layer that makes up the greatest proportion of the wall thickness, since it is this which most affects the physical properties of wood. This review describes the organisation of the cellulose component of the secondary wall of fibres and tracheids and the various methods that have been used for the measurement of MFA. It considers the variation of MFA within the tree and the biological reason for the large differences found between juvenile (or core) wood and mature (or outer) wood. The ability of the tree to vary MFA in response to environmental stress, particularly in reaction wood, is also described.

Differences in MFA have a profound effect on the properties of wood, in particular its stiffness. The large MFA in juvenile wood confers low stiffness and gives the sapling the flexibility it needs to survive high winds without breaking. It also means, however, that timber containing a high proportion of juvenile wood is unsuitable for use as high-grade structural timber. This fact has taken on increasing importance in view of the trend in forestry towards short rotation cropping of fast grown species. These trees at harvest may contain 50% or more of timber with low stiffness and therefore, low economic value. Although they are presently grown mainly for pulp, pressure for increased timber production means that ways will be sought to improve the quality of their timber by reducing juvenile wood MFA.

The mechanism by which the orientation of microfibril deposition is controlled is still a matter of debate. However, the application of molecular techniques is likely to enable modification of this process. The extent to which these techniques should be used to improve timber quality by reducing MFA in juvenile wood is, however, uncertain, since care must be taken to avoid compromising the safety of the tree.

The aim of this experiment was to determine the mechanisms involved in changes in the production of cashmere as a consequence of genetic selection. Skin follicle parameters and pattern of cashmere growth were compared in two selected lines of Scottish cashmere goats and a randomly bred control line. One line, the fine line, had been selected for low fibre diameter, and this had resulted in lower fibre diameter, but the weight of cashmere produced had also been reduced. Selection for fibre quantity and quality to give maximum financial return (the value line) had increased cashmere weight without a significant increase in cashmere diameter.

Skin follicle density and the ratio of secondary to primary follicles (S/P ratio) were measured at 5 months of age in 25 female kids from each line. The density of follicles in the value line was greater (P · 0.05) than that in the fine or control lines (means were 21·8, 19·8 and 20·1 follicles per mm2 respectively, s.e.d. 0.73). S/P ratio increased (P · 0.001) from control to fine to value lines (means were 6.5, 7.7 and 8.4 respectively, s.e.d. = 0.30).

The rate of cashmere growth (length), peak cashmere length, the duration of the cashmere growing period and dates of initiation and cessation of growth were measured in the same 25 goats from each line between 2 and 3 years of age. These traits were estimated from the regression of measurements of staple length taken at approximately 6-weekly intervals from the start of the growing period until peak staple length was reached. Measurements were made on the shoulder, mid side and hip. There was no difference in cashmere growth rate between the selection lines (average 0·29 (s.e. 0.006) mm/day). Cashmere growth started earliest in the value line and latest in the fine line but the date of cessation of growth was not different. This affected the duration of the growing period which was 183, 163 and 214 days (s.e.d. 9.6, P · 0.001) for the control, fine and value lines respectively. Peak staple length of cashmere was longest in the value line.

Increased weight of cashmere in the value line was brought about through an increase in the number of secondary follicles and by an increase in the length of cashmere due to an increase in the duration of the growing period.

Laryngeal transplantation is receiving increased attention. Re-innervation of the transplanted larynx is critical for a successful functional outcome. Different anatomical models (dog, cat, rat, pig) have been employed for experimental purposes. Interspecies similarities and differences are important for extrapolating the experimental results to humans. We present a review of the anatomical course and regional branching patterns of the laryngeal nerves in both humans and animals currently being employed in laryngeal transplantation. The clinical and surgical implications are also discussed.

Merino yearling records from 1988 to 1992 birth years in ultrafine wool selection and random control flocks at Tara Hills High Country Station, New Zealand were analysed for live weight, fleece weight and wool characteristics. Estimates of heritability, genetic and phenotypic correlations among traits using REML methods are presented. Heritabilities (h2) of birth, weaning, autumn, spring and summer live weights and greasy and clean fleece weights were estimated as being 0·35, 0·34, 0·44, 0·43, 0·49, 0·24 and 0·28 respectively; while h2 of yield, fibre diameter, coefficient of variation in fibre diameter, staple crimp, staple length, staple strength, position of break, resistance to compression, bulk, CIE Y and CIE Y-Z were estimated to be 0·58, 0·59, 0·60, 0·45, 0·71, 0·13, 0·18, 0·46, 0·38, 0·38 and 0·42 respectively. Genetic correlations were found to be high among the live weights but low to moderate among fleece weight and wool characteristics. Heritability estimates of fibre diameter, fibre diameter variation and staple length were found to be higher in New Zealand fine wool Merinos than most of those reported in the literature. The results indicate that selection for reduced fibre diameter will have little effect on other major production traits such as live weight and fleece weight.

Wood degradation by the white-rot basidiomycete Meripilus giganteus (Pers.: Pers.) Karst. was studied in naturally infected and artificially inoculated wood of beech (Fagus sylvatica L.) and large-leaved lime (Tilia platyphyllos Scop.). Semi-thin sections revealed that the secondary walls of most fibres contained internal cavities. Three distinct types of cavity formation, which differed not only between hosts, but also between cell type and location in the annual ring, were identified.

Within discoloured wood of naturally infected beech, the structure of the cavities and their formation by the associated hyphae were reminiscent of a soft-rot. By contrast, cavity formation in artificially inoculated beech and large-leaved lime wood differed from a soft-rot mode of attack as extensive delignification always preceded cavity formation, and neither T-branching, L-bending, nor hyphal growth were found within cell walls. The formation of half-moon shaped cavities in beech wood was present only in tension-wood fibres. From large diameter hyphae, growing within the fibre lumen, numerous fine perforation hyphae extended transversely via helical cracks into the cell wall. Subsequent degradation of cellulose within concentric layers of the tension-wood fibres commenced from the apices of perforation hyphae.

Sections stained with ruthenium red and hydroxlamine-ferric chloride, revealed that M. giganteus preferentially degrades pectin-rich regions of the middle lamellae in xylary ray cells. In large-leaved lime, such regions were uniformly located in the middle lamellae of axial and ray parenchyma. In beech wood, degradation of pectin-rich middle lamellae regions commenced after the delignification of secondary walls and resulted in a conspicuous hollowing of multiseriate xylem rays. Plasticity in wood degradation modes by M. giganteus in large-leaved lime and beech wood reflects variations in cell wall structure and/or prevailing wood conditions.