We report on Lagrangian statistics of turbulent Rayleigh–Bénard convection under very different conditions. For this, we conducted particle tracking experiments in a $H=1.1$-m-high cylinder of aspect ratio $\varGamma =1$ filled with air (Pr = 0.7), as well as in two rectangular cells of heights $H=0.02$ m ($\varGamma =16$) and $H=0.04$ m ($\varGamma =8$) filled with water (Pr = 7.0), covering Rayleigh numbers in the range $10^6\le {\textit {Ra}}\le 1.6\times 10^9$. Using the Shake-The-Box algorithm, we have tracked up to 500 000 neutrally buoyant particles over several hundred free-fall times for each set of control parameters. We find the Reynolds number to scale at small Ra (large Pr) as $ {\textit{Re}} \propto {\textit{Ra}}^{0.6}$. Further, the averaged horizontal particle displacement is found to be universal and exhibits a ballistic regime at small times and a diffusive regime at larger times, for sufficiently large $\varGamma$. The diffusive regime occurs for time lags larger than $\tau _{co}$, which is the time scale related to the decay of the velocity autocorrelation. Compensated as $\tau _{co} {\textit {Pr}}^{-0.3}$, this time scale is universal and rather independent of $ {\textit {Ra}}$ and $\varGamma$. We have also investigated the Lagrangian velocity structure function $S^2_i(\tau )$, which is dominated by viscous effects for times smaller than the Kolmogorov time $\tau _\eta$ and hence $S^2_i\propto \tau ^2$. For larger times we find a novel scaling for the different components with exponents smaller than what is expected in the inertial range of homogeneous isotropic turbulence without buoyancy. Studying particle-pair dispersion, we find a Batchelor scaling (${\propto }\,t^2$) on small time scales, diffusive scaling (${\propto }\,t$) on large time scales and Richardson-like scaling (${\propto }\,t^3$) for intermediate time scales.

We report the existence of two new limiting turbulent regimes in horizontal convection (HC) using direct numerical simulations at intermediate to low Prandtl numbers. In our simulations, the flow is driven by a step-wise buoyancy profile imposed at the surface, with free-slip, no-flux conditions along all other boundaries, except along the spanwise direction, where periodicity is assumed. The flow is shown to transition to turbulence in the plume and the core, modifying the rate of heat and momentum transport. These transitions set a sequence of scaling laws that combine theoretical arguments from Shishkina, Grossmann and Lohse (SGL) and Hughes, Griffiths, Mullarney and Peterson (HGMP). The parameter range extends through Rayleigh numbers in the range [$6.4\times 10^5, 1.92\times 10^{15}$] and Prandtl numbers in the range [$2\times 10^{-3},2$]. At low Prandtl numbers and intermediate Rayleigh numbers, a core-driven regime is shown to follow a Nusselt-number scaling with $Ra^{1/6}Pr^{7/24}$. For Rayleigh numbers larger than $10^{14}$, the Nusselt number scales with $Ra^{0.225}Pr^{0.417}$. For these particular regimes, the Reynolds number is found to scale as $Ra^{2/5}Pr^{-3/5}$ for the low-Prandtl-number regime and $Ra^{1/3}Pr^{1}$ for Rayleigh numbers larger than $10^{14}$. These results embed the HGMP model in the SGL theory and extend the known regime diagram of HC at high Rayleigh numbers. In particular, we show that HC and Rayleigh–Bénard share similar turbulent characteristics at low Prandtl numbers, where HC is shown to be ruled by its core dynamics and turbulent boundary layers. This new scenario confirms that fully turbulent HC enhances the transport of heat and momentum with respect to previously reported regimes at high Rayleigh numbers. This work provides new insights into the applicability of HC for geophysical flows such as overturning circulations found in the atmosphere, the oceans, and flows near the Earth's inner core.

Horizontal convection at large Rayleigh and Prandtl numbers is studied experimentally in a regime up to seven orders of magnitude larger in terms of Rayleigh numbers than previously achieved. To reach Rayleigh numbers up to $10^{17}$, the horizontal density gradient is generated using differential solutal convection by a differential input of salt and fresh water controlled by diffusion in a novel experiment in which the zero-net mass flux of water is ensured through permeable membranes. This set-up allows us to accurately measure the Nusselt number in solutal convection by carefully controlling the amount of salt water exchanged through the membranes. Combined measurements of density and velocity across more than five orders of magnitude in Rayleigh numbers show that the flow transitions from the Beardsley & Festa (J. Phys. Oceanogr., vol. 2, issue 4, 1972, pp. 444–455), Shishkina & Wagner (Phys. Rev. Lett., vol. 116, issue 2, 2016, 024302) regime to the Chiu-Webster et al. (J. Fluid Mech., vol. 611, 2008, pp. 395–426) regime and frames the present results within the scope of Shishkina et al. (Geophys. Res. Lett., vol. 43, issue 3, 2016, pp. 1219–1225), and the theory of Part 1 (Passaggia & Scotti, vol. 997, 2024, J. Fluid Mech., A5). In particular, we show that, even for large Prandtl numbers, the circulation eventually clusters underneath the forcing horizontal boundary, leaving a stratified core without motion. Finally, the previous regime diagrams (Hughes & Griffiths, Annu. Rev. Fluid Mech., vol. 40, 2008, pp. 185–208; Shishkina et al., Geophys. Res. Lett., vol. 43, issue 3, 2016, pp. 1219–1225) are extended by combining the present results at high Prandtl numbers, the results at low Prandtl numbers of Part 1, together with previous results from the literature. This work sets a new picture of the transition landscape of horizontal convection over six orders of magnitude in Prandtl number and sixteen orders of magnitude in Rayleigh number.

Numerical simulations of thermoelectrohydrodynamic convection in a dielectric liquid inside a finite-length cylindrical annulus with a fixed temperature difference have been performed with increasing high-frequency electric tension under microgravity conditions. The electric field, coupled with the permittivity gradient, generates a dielectrophoretic buoyancy force whose non-conservative part can induce thermoelectric convection in the liquid. The liquid remains in a conductive state below a critical value of the applied electric voltage. At a critical value, a supercritical bifurcation occurs from the conductive state to a convective state made of stationary helicoidal vortices. A further increase of electric voltage leads to oscillatory helicoidal vortices and then to wavy patterns before spoke patterns dominate the convective flow. The dielectrophoretic force is shown to enhance the heat transfer from the hot to cold walls due to induced convective flows. Particularly, these results demonstrate that the dielectrophoretic buoyancy force holds promise to replace the gravitational force to induce efficient heat transfer in microgravity conditions, and they contribute to a better fundamental understanding of heat transfer in microgravity.

We report the unified constitutive law of vibroconvective turbulence in microgravity, i.e. $Nu \sim a^{-1} Re_{os}^\beta$ where the Nusselt number $Nu$ measures the global heat transport, $a$ is the dimensionless vibration amplitude, $Re_{os}$ is the oscillational Reynolds number and $\beta$ is the universal exponent. We find that the dynamics of boundary layers plays an essential role in vibroconvective heat transport and the $Nu$-scaling exponent $\beta$ is determined by the competition between the thermal boundary layer (TBL) and vibration-induced oscillating boundary layer (OBL). Then a physical model is proposed to explain the change of scaling exponent from $\beta =2$ in the TBL-dominant regime to $\beta = 4/3$ in the OBL-dominant regime. Our finding elucidates the emergence of universal constitutive laws in vibroconvective turbulence, and opens up a new avenue for generating a controllable effective heat transport under microgravity or even microfluidic environment in which the gravity effect is nearly absent.

Motivated by nuclear safety issues, we study the heat transfers in a thin cylindrical fluid layer with imposed fluxes at the bottom and top surfaces (not necessarily equal) and a fixed temperature on the sides. We combine direct numerical simulations and a theoretical approach to derive scaling laws for the mean temperature and for the temperature difference between the top and bottom of the system. We find two asymptotic scaling laws depending on the flux ratio between the upper and lower boundaries. The first one is controlled by heat transfer to the side, for which we recover scaling laws characteristic of natural convection (Batchelor, Q. Appl. Maths, vol. 12, 1954, pp. 209–233). The second one is driven by vertical heat transfers analogous to Rayleigh–Bénard convection (Grossmann & Lohse, J. Fluid Mech., vol. 407, 2000, pp. 27–56). We show that the system is inherently inhomogeneous, and that the heat transfer results from a superposition of both asymptotic regimes. Keeping in mind nuclear safety models, we also derive a one-dimensional model of the radial temperature profile based on a detailed analysis of the flow structure, hence providing a way to relate this profile to the imposed boundary conditions.

The importance of buoyancy relative to free-stream flow is described using an adapted Froude number $Fr' = U/f_0^{1/3}$, where $U$ is the flow speed and $f_0$ is the exhaust buoyancy flux per unit length. We varied $Fr'$ by changing the free-stream flow rate, the exhaust flow rate and the buoyancy of the exhaust. We have experimentally identified two flow regimes, depending on the value of $Fr'$. For high $Fr'$ (low buoyancy), dispersion is driven by inertial forces in the wake and the amount of a pollutant in the wake is independent of $Fr'$. For moderate $Fr'$, a wall plume develops up the back of the step, directly feeding the pollutant into the shear layer, but without altering the shape of the wake. This wall plume reduces the amount of pollutant trapped behind the step. We developed an analytic model to describe the quantity of pollutant trapped behind the step. The model predicts the transition from buoyancy being negligible to being the dominant transport mechanism within the wake. We have hypothesised and observed some evidence of a third regime at low $Fr'$, when the buoyancy is sufficient to distort the macrostructure of the shear layer and wake.

An analysis of laminar natural convection in inclined slots subjected to patterned heating has been performed. The imposed heating takes a simple form characterized by a single Fourier mode combined with uniform heating. It is shown that periodic heating applied at the lower plate produces no net flow when the slot is either horizontal or vertical, but a net upward flow is generated when the slot is tilted. Periodic heating applied at the upper plate produces net downward flow in the inclined situation. The addition of uniform heating promotes the upward flow while cooling has the opposite effect. There is a critical inclination angle at which the maximum net flow rate is greatest. Dynamic and thermal boundary layers are present when the wavenumber of the imposed heating is large. The use of heating at both plates, with the same wavenumber, leads to a flow dominated by the plate exposed to a more intense heating; when the two plates are heated equally no net flow is observed irrespective of the inclination angle. Changes of the relative positions of the two patterns can change the net flow rate by up to 50 %. The intensity of the flow increases with reduction of the Prandtl number. If the heating applied to the plates is of different wavelength, but of the same intensity, a wide range of behaviours of the flow system is possible. The details of this response are sensitive to the ratio of the two wavenumbers.

Laminar natural convection is investigated in an infinite vertical slot which has one wall with a corrugated profile, and which is subject to either a uniform or periodic heating profile. This configuration has the attractive feature that it enables a study of the effects that may be produced via the interaction of heating and topography patterns. It is found that the addition of the grooves to an isothermal plate leads to a reduction in the vertical fluid flow and an increase of the transverse heat flow. In contrast, imposing sinusoidal heating on a flat surface generates convection that appears as counter-rotating rolls but there is no net vertical flow. The combination of the two effects of corrugation together with periodic heating leads to a plethora of flow patterns involving a combination of rolls and stream tubes that carry the fluid along the slot. The details of this vertical flow are governed by a pattern interaction effect dictated by the relative positions of the heating and corrugation patterns; when hot spots of the imposed heating overlap the peaks in the grooves the net flow is upward; in contrast, when they lie over the troughs the resultant flow is downward. The interplay between the thermal and geometrical effects weakens as the wavelength of the structure is reduced. The inclusion of a sufficiently strong uniform heating also seems to wash away the pattern interaction effect.

Despite the important role mass loss in the red supergiant phase plays in controlling stellar evolution and massive stars’ final supernova fates, a theoretical explanation of the mechanism driving this mass loss has been elusive. In this contribution we present a recent breakthrough [Kee et∼al., 2021] showing that turbulent pressure alone is sufficient to markedly extend the atmospheres of red supergiants and allow a wind to be launched. The resulting theory provides a fully analytic prescription for red supergiant mass-loss rates. Moreover, the theoretical mass-loss rates computed from observationally inferred turbulent velocities are in overall good agreement with observationally inferred red supergiant mass loss. A particularly interesting aspect of this theory is that it is not sensitive to metallicity, providing important implications for stellar evolution and the so-called “red-supergiant problem” for supernova progenitors in various environments.

Our knowledge of massive star evolution is limited by uncertainties linked with multi-dimensional processes taking place in stellar interiors. Important examples are convective boundary mixing (CBM) and entrainment, which are implemented in 1D stellar evolution models assuming simplified prescriptions. 3D hydrodynamics models can improve these prescriptions by studying realistic multi-D processes for a short timerange (minutes or hours). In these proceedings, we present results coming from a new set of high-resolution hydrodynamics simulations of a neon-burning shell in a massive star, and discuss how the entrainment law can be calibrated from 3D models and then used to improve 1D stellar evolution prescriptions.

This paper studies numerically the convection of water vapour in snowpacks using an Eulerian–Eulerian two-phase approach. The convective water vapour transport in snow and its effects on snow density are often invoked to explain observed density profiles, e.g. of thin Arctic snow covers, but this process has never been numerically simulated and analysed in a systematic manner. Here, the impact of convection on the thermal and phase change regimes as a function of different snowpack depths, thermal boundary conditions and Rayleigh numbers is analysed. We find considerable impact of natural convection on the snow density distribution with a layer of significantly lower density at the bottom of the snowpack and a layer of higher density located higher in the snowpack or at the surface. We find that emergent heterogeneity in the snow porosity results in a feedback effect on the spatial organization of convection cells causing their horizontal displacement. Regions where the snowpack is most impacted by phase changes are found to be horizontally extended and vertically thin, ‘pancake’-like layers at the top and bottom of the snowpack. We further demonstrate that among the parameters important for natural convection, the snowpack depth has the strongest influence on the heat and mass transfer. Despite our simplifying assumptions, our study represents a significant improvement over the state of the art and a first step to accurately simulate snowpack dynamics in diverse regions of the cryosphere.

In this paper, we propose a series expansion of the baroclinic torque in low-Mach-number flows, so that the accuracy and universality of any buoyancy term could be examined analytically, and new types of buoyancy terms could be constructed and validated. We first demonstrate that the purpose of introducing a buoyancy term is to approximate the baroclinic torque, and straightforwardly the error of any buoyancy term could be defined with the deviation of its curl from the corresponding baroclinic torque. Then a regular perturbation method is introduced for the elliptic equation of the hydrodynamic pressure in low-Mach-number flows, resulting in a sequence of Poisson equations, whose solutions lead to the series representation of the baroclinic torque and the new types of buoyancy terms. It is found that the frame invariance of the momentum equation is maintained with one of the new types of buoyancy terms. With the error definition of buoyancy terms and the series representation of the baroclinic torque, the validity and accuracy of previous and new buoyancy terms are examined. Finally, numerical simulations confirm that, with a decreasing density variation or an increasing order of our new buoyancy term, the simplified equations can converge to the original low-Mach-number equations.

When a supernova shockwave launched deep inside the star exits the surface, it probes the circumstellar medium established by prior mass loss from the pre supernova star. The bright electromagnetic display accompanying the shock breakout is influenced by the properties of the star and scripts the history of the stellar mass loss. We investigate with MESA and STELLA codes the radiative display resulting from a set of progenitors that we evolved to core collapse. We simulate with different internal convective overshoot and compositional mixing and two sets of mass loss schema, one the standard “Dutch” scheme and another, an enhanced, episodic mass loss at a late stage. Shock breakout from the star shows double peaked bolometric light curves for the Dutch wind, as well as high velocity ejecta accelerated during shock breakout. We contrast the breakout flash from an optically thick CSM with that of the rarified medium.

Tomographic background oriented Schlieren (Tomo-BOS) imaging measures density or temperature fields in three dimensions using multiple camera BOS projections, and is particularly useful for instantaneous flow visualizations of complex fluid dynamics problems. We propose a new method based on physics-informed neural networks (PINNs) to infer the full continuous three-dimensional (3-D) velocity and pressure fields from snapshots of 3-D temperature fields obtained by Tomo-BOS imaging. The PINNs seamlessly integrate the underlying physics of the observed fluid flow and the visualization data, hence enabling the inference of latent quantities using limited experimental data. In this hidden fluid mechanics paradigm, we train the neural network by minimizing a loss function composed of a data mismatch term and residual terms associated with the coupled Navier–Stokes and heat transfer equations. We first quantify the accuracy of the proposed method based on a two-dimensional synthetic data set for buoyancy-driven flow, and subsequently apply it to the Tomo-BOS data set, where we are able to infer the instantaneous velocity and pressure fields of the flow over an espresso cup based only on the temperature field provided by the Tomo-BOS imaging. Moreover, we conduct an independent PIV experiment to validate the PINN inference for the unsteady velocity field at a centre plane. To explain the observed flow physics, we also perform systematic PINN simulations at different Reynolds and Richardson numbers and quantify the variations in velocity and pressure fields. The results in this paper indicate that the proposed deep learning technique can become a promising direction in experimental fluid mechanics.