In this paper, the definition of generalized symmetric Gough–Stewart parallel manipulators is presented. The concept of dynamic isotropy is proposed and the singular values of the bandwidth matrix are introduced to evaluate dynamic isotropy and solved analytically. Considering the payload's mass-geometry characteristics, the formulations for completely dynamic isotropy are derived in close form. It is proven that a generalized symmetric Gough–Stewart parallel manipulator is easer to achieve dynamic isotropy and applicable in engineering applications. An optimization procedure based on particle swarm optimization is proposed to obtain better dexterity and large singularity-free workspace, which guarantees the optimal solution and gives mechanically feasible realization.

This paper presents an investigation into the development of parametric and non-parametric approaches for dynamic modelling of a flexible manipulator system. The least mean squares, recursive least squares and genetic algorithms are used to obtain linear parametric models of the system. Moreover, non-parametric models of the system are developed using a non-linear AutoRegressive process with eXogeneous input model structure with multi-layered perceptron and radial basis function neural networks. The system is in each case modelled from the input torque to hub-angle, hub-velocity and end-point acceleration outputs. The models are validated using several validation tests. Finally, a comparative assessment of the approaches used is presented and discussed in terms of accuracy, efficiency and estimation of the vibration modes of the system.

In the field of multifingered mechanisms the control/command problem is mainly a problem o1 coordination. The problem is not only to coordinate joints of a chains but also to coordinate the different chains together.

This paper presents a general and efficient method for implementing the control/command of such systems, taking into account the force distribution problem. To solve this problem it is necessary to pay great attention to dynamic effects. To do this, we broke down the Inverse Dynamic Model (I.D.M.) problem into two main levels; One level is devoted to I.D.M. computation; it can be called the Finger Level (F.L.). As we wanted to divide up the work to be done as much as possible, we subdivided the Finger Level according to the number o1 kinematic chains. In addition, we considered a second level, the Coordinator. This level has to control all the chains using the Fingers-to-Object-Interaction Model (F.O.LM.).

Next, we will also introduce new grasping systems: Polyvalent Gripper Systems (P.G.S). There are a new solution to multicomponent assembly problems. As they can be equipped with several multifingered mechanisms, they can also use the control/command scheme.

A collision-free trajectory control for multiple robots is proposed. The proposed method is based on the concept of neural optimization network. The positions or configurations of robots are taken as the variables of the neural circuit, and the energy of network is determined by combining various functions, in which one function is to make each robot approach to its goal and another helps each robot from colliding with other robots or obstacles. Also a differential equation of the circuit which tends to minimize the energy is derived. A new method for describing collision between articulated arms is presented and some heuristic method to improve the feasibility and the safety of the trajectory is proposed. Also illustrative simulation results for mobile robots and articulated robot arms are presented.

We present a miniature magnetic climbing robot with dimensions 96 × 46 × 64 mm3. With two degrees of freedom it is able to climb ferromagnetic surfaces and to make inner plane to plane transitions whatever their inclination is. This robot, named TRIPILLAR, combines triangular-shaped magnetic caterpillars and frame magnets. This particular configuration allows, for example, to move from ground to wall and ceiling and back. This achievement opens new avenues to use mobile robotics for industrial inspection with stringent size restrictions, such as the ones encountered in power plants.

Stroke is a common condition resulting in 30,000 people per annum left with significant disability. In patients with severe arm paresis after stroke, functional recovery in the affected arm is poor. Inadequate intensity of treatment is cited as one factor accounting for the lack of arm recovery found in some studies. Given that physical therapy resource is limited, strategies to enhance the physiotherapists' efforts are needed. One approach is to use robotic techniques to augment movement therapy.

A three degree-of-freedom pneumatic robot has been developed to apply physiotherapy to the upper limb. The robot has been designed with a workspace encompassing the reach-retrieve range of the average male. Control experiments have applied force and then position only controllers to the pneumatic robot. These controllers are combined to form a position-based impedance control strategy on all degrees of freedom of the robot. The impedance controller performance was found to be dependent upon the specified impedance parameters. Initial experiments attaching the device to human subjects have indicated great potential for the device.

This paper first presents a method of motion planning and implementation for the self-recovery of an overturned six-legged robot. Previous studies aimed at the static and dynamic stabilization of robots for preventing them from overturning. However, no one can guarantee that an overturn accident will not occur during various applications of robots. Therefore, the problems involving overturning should be considered and solved during robot design and control. The design inspirations of multi-legged robots come from nature, especially insects and mammals. In addition, the self-recovery approach of an insect could also be imitated by robots. In this paper, such a self-recovery mechanism is reported. The inertial forces of the dangling legs are used to bias some legs to touch the ground, and the ground reaction forces exerted on the feet of landing legs are achieved to support and push the body to enable recovery without additional help. By employing the mechanism, a self-recovery approach named SSR (Sidewise-Self-Recovery) is presented and applied to multi-legged robots. Experiments of NOROS are performed to validate the effectiveness of the self-recovery motions. The results show that the SSR is a suitable method for multi-legged robots and that the hemisphere shell of robots can help them to perform self-recovery.

Null space velocity control is essential for achieving good behaviour of a redundant manipulator. Using the dynamically consistent pseudo-inverse, the task and null space motion and forces are decoupled. The paper presents a globally stable null space velocity controller and the gradient projection technique in conjunction with the dynamically consistent pseudo-inverse. The physical meaning and influence of the compensation terms in null the space velocity controller are explained. The performance of the proposed null space controller is tested on 4. d.o.f planar redundant manipulator interacting with the environment.

This article synthezises the most important results on the kinematics of cuspidal manipulators i.e. nonredundant manipulators that can change posture without meeting a singularity. The characteristic surfaces, the uniqueness domains and the regions of feasible paths in the workspace are defined. Then, several sufficient geometric conditions for a manipulator to be noncuspidal are enumerated and a general necessary and sufficient condition for a manipulator to be cuspidal is provided. An explicit DH-parameter-based condition for an orthogonal manipulator to be cuspidal is derived. The full classification of 3R orthogonal manipulators is provided and all types of cuspidal and noncuspidal orthogonal manipulators are enumerated. Finally, some facts about cuspidal and noncuspidal 6R manipulators are reported.

This paper describes the design of a small-scale three degree-of-freedom compliant-mechanism-based manipulator with an approximately 2 cm×2 cm×2 cm cubic workspace. The manipulator exhibits a significantly larger range of motion and better spatial structural properties than a conventional compliant mechanism, due primarily to a unique flexure joint developed by the authors. A brief description of the mechanics of the flexure joint is followed by a description of the design of the manipulator. Following the mechanical description, the design of the low-level manipulator controller is discussed. Finally, data is presented that demonstrates manipulator performance.

This paper presents a hybrid approach to optimize the counterweight balancing of a robot arm. A new technique that combines an artificial intelligence technique called the genetic algorithm (GA) and the weighted min-max multiobjective optimization method is proposed. These techniques are included in a system developed by the authors, called MOSES, which is intended to be used as a tool for engineering design optimization. The results presented here show how the new proposed technique can get better trade-off solutions and a more accurate Pareto front for this highly non-convex problem using an ad-hoc floating point representation and traditional genetic operators. Finally, a methodology to compute the ideal vector using a genetic algorithm is presented. It is shown how with a very simple dynamic approach to adjust the parameters of the GA, it is possible to obtain better results than those previously reported in the literature for this problem.

Two types of computer boards incorporating recently developed VLSI fuzzy inferencing chips have been developed to support the addition of qualitative reasoning capabilities to the real-time control of robotic systems. The design and operation of these boards are first reviewed and their use, in conjunction with our proposed Fuzzy Behaviorist approach, is discussed. This approach uses superposition of elemental sensor-based behaviors expressed in the Fuzzy Sets theoretic framework, to emulate "human-like" reasoning inrobotic systems.

This paper reports the design, analysis, and control of a miniature vibration-driven planar locomotion robot called Shell. A vibration-driven system is able to achieve locomotion based on internal oscillations and anisotropic friction forces. In this robot design, two parallel oscillators are employed to provide propelling forces, and a blade-like support is designed to generate anisotropic frictional contact with the ground. If the two parallel oscillators are of different frequencies and amplitudes, two-dimensional locomotion of the robot can be achieved. To predict the robot's planar locomotion, a dynamic model is developed. Controlling the robot's locomotion and especially, the locomotion modes can be achieved by adjusting the vibration frequencies of the two internal oscillators. Experimental results show that Shell can be controlled to move rectilinearly and along circles with certain curvatures. In addition, by combining these basic trajectories, Shell can move freely on a horizontal plane.

One of the main challenges in robotics is navigating autonomously through large, unknown, and unstructured environments. Simultaneous localization and mapping (SLAM) is currently regarded as a viable solution for this problem. As the traditional metric approach to SLAM is experiencing computational difficulties when exploring large areas, increasing attention is being paid to topological SLAM, which is bound to provide sufficiently accurate location estimates, while being significantly less computationally demanding. This paper intends to provide an introductory overview of the most prominent techniques that have been applied to topological SLAM in terms of feature detection, map matching, and map fusion.

This paper describes and evaluates the use of a head-mounted display (HMD) for the teleoperation of a field robot. The HMD presents a pair of video streams to the operator (one to each eye) originating from a pair of stereo cameras located on the front of the robot, thus providing him/her with a sense of depth (stereopsis). A tracker on the HMD captures 3-DOF head orientation data which is then used for adjusting the camera orientation by moving the robot and/or the camera position accordingly, and rotating the displayed images to compensate for the operator's head rotation. This approach was implemented in a search and rescue robot (RAPOSA), and it was empirically validated in a series of short user studies. This evaluation involved four experiments covering two-dimensional perception, depth perception, scene perception, and performing a search and rescue task in a controlled scenario. The stereoscopic display and head tracking are shown to afford a number of performance benefits. However, one experiment also revealed that controlling robot orientation with yaw input from the head tracker negatively influenced task completion time. A possible explanation is a mismatch between the abilities of the robot and the human operator. This aside, the studies indicated that the use of an HMD to create a stereoscopic visualization of the camera feeds from a mobile robot enhanced the perception of cues in a static three-dimensional environment and also that such benefits transferred to simulated field scenarios in the form of enhanced task completion times.

We designed a quadruped robot with a one-degree-of-freedom (1-DOF)-pitch head, a 1-DOF-roll tail, and 14 active DOFs in total, which are controlled via a central pattern generator (CPG) based on a Hopf oscillator. Head and tail movements are coupled to the leg movements with fixed phase differences. Experiments show that tail swinging in roll can equilibrate feet–ground reaction forces (GRF), reducing yaw errors and enabling the robot to maintain its direction when trotting. Head swing in pitch has the potential to increase flight time and stride length of the swinging legs and increase the robot's forward velocity when running in bounds.

We present a model of construction using iterative amorphous depositions and give a distributed algorithm to reliably build ramps in unstructured environments. The relatively simple local strategy for interacting with irregularly shaped, partially built structures gives rise to robust adaptive global properties. We illustrate the algorithm in both single robot and multi-robot cases via simulations and describe how to solve key technical challenges to implementing this algorithm via a robotic prototype.

A CCC limb and a new 3CCC parallel mechanism have been designed in this paper based on geometry analysis. Their mobility and geometrical constraints are discussed by using screw theory and geometrical equations separately. Following that both the inverse and forward kinematics of the 3CCC parallel mechanism are proposed, in which Dixon's resultant is used to get the forward solutions for the orientation and a eighth-order polynomial equation in one unknown is obtained, leading to the results for the position analysis, numerical examples confirm these theoretical results. A short comparison with the traditional Stewart platforms is presented in terms of kinematics, workspace and trajectory planning.

A novel ostraciiform swimming, vision-based autonomous robotic fish is developed in this paper. Its feasibility and capability are shown by implementing a dynamic target following task in a swimming pool. Inspired by boxfish that is highly stable and fairly maneuverable, the robotic fish is designed and constructed by locating multiple propulsors peripherally around a rigid body. Swimming locomotion of the robotic fish is achieved through harmonic oscillations of the tail and pectoral fins. The forces and moments acting on the fins and body are analyzed and the governing motion equations are derived. Through coordinating the movements of the propulsors, several typical swimming patters are empirical designed and realized. A digital camera is integrated in the robotic fish, and the visual information is processed with the embedded microcontroller. To treat the degradation of underwater image, a continuously adaptive mean shift (Camshift) algorithm is modified to keep visual lock on the moving target. A fuzzy logic controller is designed for motion regulation of a hybrid swimming pattern, which employs synchronized pectoral fins for thrust generation and tail fin for steering. A simple target following task is designed via an autonomous robotic fish swimming after a manually controlled robotic fish with fixed distance. The swimming performance of the robotic fish is tested and the effectiveness of the proposed target following method is verified experimentally.

Many research works on the control of nonholonomic wheeled mobile robots (WMRs) do not consider the actuator saturation problem and the absence of velocity sensors in practice. The actuator saturation deteriorates the tracking performance of the controller, and the use of velocity sensors increases the cost and weight of WMR systems. This paper simultaneously addresses these problems by designing a saturated output feedback controller for uncertain nonholonomic WMRs. First, a second-order input–output model of nonholonomic WMRs is developed by defining a suitable set of output equations. Then a saturated adaptive robust tracking controller is proposed without velocity measurements. For this purpose, a nonlinear saturated observer is used to estimate robot velocities. The risk of actuator saturation is effectively reduced by utilizing saturation functions in the design of the observer–controller scheme. Semi-global uniform ultimate boundedness of error signals is guarantied by the Lyapunov stability analyses. Finally, simulation results are provided to show the effectiveness of the proposed controller. Compared with one recent work of the author, a comparative study is also presented to illustrate that the proposed saturated controller is more effective when WMR actuators are subjected to saturation.