This article describes the electrical and physical properties of polysilicon doped with novel N+ and P+ screen printed inks using a thermally activated process. Unique ink formulations for N and P type doping of silicon are evaluated in volume production in order to enable a low cost, high throughput process. Inks can be used with multiple substrate types and form factors. The concentrated doping source combined with thermal drive in and activation results in degenerately doped layers of polysilicon. Inks are semiconductor grade which is demonstrated by their use in fabricating high mobility, low leakage Thin Film Transistor (TFT) devices on 300 mm stainless steel substrates. Reproducible sheet resistance values (700 A polysilicon) can be engineered from levels typically ranging from 200 - 2000 ohm/sq. The additive approach substitutes the use of high capital cost ion implantation and lithography processes. The ink formulation results in screen printed widths capable of ranging from 100-300 um. As both N and P type layers can be printed adjacent to each other, it is critical to prevent cross doping using surface preparation techniques. Post doping cleaning of surfaces can be achieved in-situ or by plasma removal depending on process integration and product considerations. Reproducibility and uniformity data to demonstrate manufacturability in a production environment is shown. In summary, a simple, low cost, high throughput additive process based on proprietary inks that can be used in multiple product flows (CMOS TFT, Solar etc.) is demonstrated.

Over the last decade, the explosion in research and Development associated with nanoscalar materials has continued apace. In parallel with this has been the rapid rise of both sustainable materials and, as a consequence, Natural, Cellular and Responsive material systems. Many of these originate from inorganic, inorganic-organic hybrid composites and polymeric and bio-nano polymeric systems which exhibit intrinsic physico-chemical properties that can be classed as ‘soft’. That is flexible, malleable, lightweight, transparent or semi-transparent and stretchable in character and which can also offer both biocompatible and bioresorbable characteristics essential to useable and sustainable material systems.

This paper describes some of the ways in which we are beginning to understand, explain and exploit ‘soft’ technology. In particular the interactive role of creative design and innovative material science linked through new fabrication methodologies that have, as their common purpose, a focus on compelling Human centred needs. Examples are health, wellness, ambient assistance and urgent improvements in cleanliness, hygiene and nutrition.

The Polymer Electrolyte Membrane Fuel Cells (PEMFCs) platinum catalyst’s susceptibility to poisoning by carbon monoxide (CO) reduces its output power. In an effort to diminish poisoning, gold and platinum nanoparticles were incorporated onto partially reduced graphene oxide (Au/Pt-prGO) sheets to reduce both nanoparticle aggregation and the amount of precious metal needed. Applying this material onto the electrodes and Nafion membrane of a PEMFC was hypothesized to increase CO tolerance as well as power output.

Aliquots of graphene oxide (GO) were functionalized with platinum and/or gold nanoparticles using a simple desktop synthesis at room temperature. Partial reduction with NaBH4 maintained hydrophilic solubility. Test solutions applied to electrodes and to electrodes + Nafion membrane were first tested in a PEM fuel cell with a pure H2 gas feed and then repeated with a H2 gas feed containing 1000 ppm of CO. Test arrangements averaged doubling the output power of the poisoned control, with the most effective yielding an output power ∼250% that of the poisoned control. Additionally, each system’s poisoned output power (PP) was compared to its highest possible output power (PM), with the most effective setup showing no reduction in output power, even with a H2 gas feed containing 1000 ppm of CO. Thus, this offers promise of a simple, cost-effective method of both improving PEMFC power output while reducing or even eliminating CO poisoning at room temperature.

A trend in the operation of nuclear power reactors is the increase in discharge burnup of the fuel. Intrusion of groundwater in a failed canister of a future deep repository is expected to occur in the presence of hydrogen, produced by the anoxic corrosion of iron and by radiolysis of water. Compelling evidence now exists that hydrogen inhibits oxidative dissolution of irradiated nuclear fuel or alpha doped UO2, however the number of studies involving high burnup fuel are limited. In the experiment PWR UO2 fuel with a burnup of ∼75 MWd/kgU was leached in simulated groundwater (10 mM NaCl, 2 mM NaHCO3) at room temperature under 5 MPa of hydrogen. Since the main objective was to investigate the fuel matrix dissolution, a fuel fraction that had previously been leached for over one year was reused. The U-238 and Tc-99 concentration was found to vary in the samples taken over 1100 days of leaching, depending on the degree of centrifugation. The erratic behavior of this autoclave experiment is tentatively attributed to a high surface area, with sub-micrometer sized fuel particles adhering to larger fuel fragments (evidenced by electron microscopy), caused by the fuel milling at the start of the experiment. This likely promoted an increased amount of pre-oxidation of the fuel as well as the potential for reductive precipitation and subsequent release of colloids from the autoclave. As a comparison, initial results from an ongoing autoclave experiment with coarser fuel fragments are also given.

EURO-GANEX aims to recycle both major and minor actinides. As the final waste composition is free from actinides, adapted immobilization matrices should be developed. Synroc is a potential wasteform that has proven itself to be efficient in immobilizing high-level wastes (HLW). In this study, a new composition of Synroc, Synroc-Z, is designed and characterized. The key modification is in decreasing the amount of zirconolite phase, which is the main host phase for actinides and increasing the amount of other phases (hollandite and perovskite). As designed the obtained amount of zirconolite is lower than in Synroc-C compositions. Synroc-Z samples were synthesized with a waste loading of 20 wt.% at various temperatures and pressures via hot-pressing to determine the optimum process parameters, which were determined to be 1150-1200°C and 20 MPa, respectively.

Given their low toxicity and natural presence in the human diet, selenium nanoparticles have been established as potential candidates for the treatment of numerous cancers. In this study, red-allotrope selenium nanoparticles (rSeNPs) were synthesized and characterized. Head and neck squamous cell carcinoma (HNSCC) and human dermal fibroblast (HDF) cell lines were cultured and exposed to rSeNPs at concentrations ranging from 0.01 to 100μg rSeNP/mL media for one to three days. The cytotoxicity of rSeNP towards HNSCC and HDF was analyzed. Results indicated that the particles were approximately four times as cytotoxic toward HNSCC compared to HDF, with their respective IC50 values at 19.22 and 59.61μg rSeNP/mL media. Using statistical analysis, an effective dosage range for killing HNSCC cells while simultaneously minimizing damage to HDF over a three-day incubation was established as 20 to 55μg rSeNP/mL media. Such results indicate that rSeNPs are a potential option for treating HNSCC. Due to its ability to minimize nanoparticle agglomeration, making a it a candidate with which to functionalize selenium, similar assays were performed using poly(ethylene glycol) with a molecular weight of 200g/mol (PEG200), with results indicating that only a slight cytotoxic effect exists for HNSCC and almost no effect for HDF.

We studied TAGzT theoretically using density functional perturbation theory within the plane-wave-pseudo-potential formalism and experimentally by Raman and IR spectroscopy at ambient and high pressure. The modeled spectra predict reasonably well the experimental spectra at ambient pressure and the Raman vibrational modes at pressures up to 25 GPa. We report the effects of pressure on volume, Raman and IR vibrational modes, and charge distribution of TAGzT.

Macroscopic and microscopic photovoltage characteristics of detonation nanodiamonds (DNDs) with distinct surface terminations are presented. Organic photodiodes are fabricated based on P3HT+DNDs mixture (50 wt%). We compare effect of hydrogen and oxygen termination of DNDs. Compared to photodiodes without DNDs the current-voltage characteristics of photodiodes with O-DNDs in dark and under AM 1.5 illumination show reduced dark current, and higher photocurrent and open circuit voltage. H-DNDs shunt the photodiodes, which is attributed to their surface conductivity. Kelvin probe force microscopy detects a reproducible photovoltage of around 5 mV generated by a green laser (532 nm) on both types of pristine DNDs. Thus although conductivity of H-DNDs may represent a problem for photodiodes, both types of DNDs alone can function as miniature energy conversion devices.

The structural and electronic properties of lead chalcogenides PbX (X=S, Se, and Te) are investigated by first-principles calculations based on the range-separated hybrid functionals and semilocal generalized gradient approximation. It is found that an accurate band structure description requires the hybrid functional with the spin-orbit coupling included. Using this approach, the band structure of lead telluride and doped lead selenide are calculated, and its influences on the transport properties are discussed.

Mg, the only effective p-type dopant for nitrides, is well-studied in thin films due to the important role the impurity plays in light emitting diodes and high power electronics. However, there are few reports of Mg in thick free-standing GaN substrates. Here we evaluate the material quality and point defects in GaN grown by hydride vapor phase epitaxy (HVPE) using metallic Mg as the doping source. The crystal quality is typical of commercially grown HVPE substrates, and the photoluminescence measurements reveal distinctively sharp excitonic and shallow-donor shallow-acceptor features. Secondary ion mass spectroscopy indicates total Mg concentrations between 7x1016 and 6x1018 cm-3 in the four separate samples studied but, more significantly, photoluminescence and electron paramagnetic resonance spectroscopy show that the Mg is incorporated as a shallow acceptor.