Annexin A2 (ANXA2) is reported to be associated with cancer development. To investigate the roles ANXA2 plays during the development of cancer, the RNAi method was used to inhibit the ANXA2 expression in caco2 (human colorectal cancer cell line) and SMMC7721 (human hepatocarcinoma cell line) cells. The results showed that when the expression of ANXA2 was efficiently inhibited, the growth and motility of both cell lines were significantly decreased, and the development of the motility relevant microstructures, such as pseudopodia, filopodia, and the polymerization of microfilaments and microtubules were obviously inhibited. The cancer cell apoptosis was enhanced without obvious significance. The possible regulating pathway in the process was also predicted and discussed. Our results suggested that ANXA2 plays important roles in maintaining the malignancy of colorectal and hepatic cancer by enhancing the cell proliferation, motility, and development of the motility associated microstructures of cancer cells based on a possible complicated signal pathway.

Enzyme histochemistry is a valuable histological method which provides a connection between morphology, activity, and spatial localization of investigated enzymes. Even though the method relies purely on arbitrary evaluations performed by the human eye, it is still wildly accepted and used in histo(patho)logy. Texture analysis emerged as an excellent tool for image quantification of subtle differences reflected in both spatial discrepancies and gray level values of pixels. The current study of texture analysis utilizes the gray-level co-occurrence matrix as a method for quantification of differences between ecto-5′-nucleotidase activities in healthy hippocampal tissue and tissue with marked neurodegeneration. We used the angular second moment, contrast (CON), correlation, inverse difference moment (INV), and entropy for texture analysis and receiver operating characteristic analysis with immunoblot and qualitative assessment of enzyme histochemistry as a validation. Our results strongly argue that co-occurrence matrix analysis could be used for the determination of fine differences in the enzyme activities with the possibility to ascribe those differences to regions or specific cell types. In addition, it emerged that INV and CON are especially useful parameters for this type of enzyme histochemistry analysis. We concluded that texture analysis is a reliable method for quantification of this descriptive technique, thus removing biases and adding it a quantitative dimension.

There are many sources of random and systematic error in composition quantification by atom probe microscopy, often, however, only statistical error is reported. Significantly larger errors can occur from the misidentification of ions and overlaps or interferences of peaks in the mass spectrum. These overlaps can be solved using maximum likelihood estimation (MLE), improving the accuracy of the result, but with an unknown effect on the precision. An analytical expression for the uncertainty of the MLE solution is presented and it is demonstrated to be much more accurate than the existing methods. In one example, the commonly used error estimate was five times too small.

Literature results containing overlaps most likely underestimate composition uncertainty because of the complexity of correctly dealing with stochastic effects and error propagation. The uncertainty depends on the amount of overlapped intensity, for example being ten times worse for the CO/Fe overlap than the Cr/Fe overlap. Using the methods described here, accurate estimation of error, and the minimization of this could be achieved, providing a key milestone in quantitative atom probe. Accurate estimation of the composition uncertainty in the presence of overlaps is crucial for planning experiments and scientific interpretation of the measurements.

The drive to replace scarce and expensive Pt-based electrocatalysts for oxygen reduction reaction (ORR) has led to the development of a group of electrocatalysts composed of transition-metal ion centers coordinated with four nitrogen groups (M-N4). Among these, metal phthalocyanines (MPcs), due to low cost of preparation, highly conjugated structure as well as high thermal and chemical stability, have received a great interest. The catalytic activity of MPcs can be improved by employing conducting supports. Here, in this report, we have solvothermally synthesized graphene-supported zinc phthalocyanine nanostructures, and their ORR kinetics and mechanism have been investigated in neutral solution (pH = 7) by using the rotating disk electrode technique. The as-synthesized nanocomposite followed a 4e− reduction pathway. The onset potential (−0.04 V versus Ag/AgCl) found in this work can be comparable with other state-of-the-art material, demonstrating good performance in neutral solution. The fascinating performance leads the nanocomposite material toward future energy applications.

Routine system checks are essential for supervising the performance of an advanced light microscope. Recording and evaluating the point spread function (PSF) of a given system provides information about the resolution and imaging. We compared the performance of fluorescent and gold beads for PSF recordings. We then combined the open-source evaluation software PSFj with a newly developed KNIME pipeline named PSFtracker to create a standardized workflow to track a system's performance over several measurements and thus over long time periods. PSFtracker produces example images of recorded PSFs, plots full-width-half-maximum (FWHM) measurements over time and creates an html file which embeds the images and plots, together with a table of results. Changes of the PSF over time are thus easily spotted, either in FWHM plots or in the time series of bead images which allows recognition of aberrations in the shape of the PSF. The html file, viewed in a local browser or uploaded on the web, therefore provides intuitive visualization of the state of the PSF over time. In addition, uploading of the html file on the web allows other microscopists to compare such data with their own.

Vasodilation occurs as a result of the relaxation of the smooth muscle cells present in the walls of blood vessels. Various suitable models are available for the analysis of the vasoactive properties of drugs with therapeutic applications. But all these models have limitations, such as ethical issues and high cost. The purpose of this study is to develop an alternative model for studying the vasoactive properties of drugs using an in-ovo chicken embryo model. In the preliminary experiment, we used a well-known vasoconstrictor (adrenaline) and a vasodilator (spermine NoNoate) in the chick embryo area vasculosa and evaluated their concentration-response curve. Adrenaline (10 µM) and spermine NoNoate (10 µM) were administered in different arteries and veins and different positions of the right vitelline artery of the chick embryo. Results showed the middle of the vessel bed of the right vitelline artery having the best vasoactive effect compared to others. Finally, anti-hypertensive drugs, calcium channel blockers, and NOS agonists were administered in the chick embryo area vasculosa to validate the model. Results demonstrate that the chick embryo area vasculosa can be an alternative, robust, and unique in-ovo model for screening of anti-hypertensive drugs in real time.

We introduce an efficient, automated computational approach for analyzing interfaces within atom probe tomography datasets, enabling quantitative mapping of their thickness, composition, as well as the Gibbsian interfacial excess of each solute. Detailed evaluation of an experimental dataset indicates that compared with the composition map, the interfacial excess map is more robust and exhibits a relatively higher resolution to reveal compositional variations. By field evaporation simulations with a predefined emitter mimicking the experimental dataset, the impact of trajectory aberrations on the measurement of the thickness, composition, and interfacial excess of the decorated interface are systematically analyzed and discussed.

In this study, we characterized secretory granules in somatotroph (STCs) and corticotroph (CTCs) cells from the anterior pituitary of rats, in conjunction with different experimental treatments with bee venom (BV). In the rats injected for 30 days with daily BV doses equivalent to one sting, we found significant changes in secretory granules' diameter: reduced by 48.15% in STCs and increased by 5.09% in CTCs, and especially a shift to gray into their intensity profile: increased by 237.04% in STCs and by 212.38% in CTCs. In the rats injected with a single high BV dose, the granules' diameter was reduced in both STCs (by 7.14%) and CTCs (by 4.67%—significant) and their gray intensity profile increased by 200% in STCs and by 51.71% in CTCs (both are significant). The changes in the gray profile reflected a reduced content of granules in the cells, consistent with an increase of the plasma levels of GH and ACTH in all cases. We concluded that the reduced hormone cargo of granules in STCs and CTCs resulted from an accelerated cell secretion. The results obtained for the two types of cells correlated, indicating a similar reaction of these secretory cells to the prolonged and acute presence of BV in the organism.

Through a correlative analytical approach encompassing backscattered electron scanning electron microscopy (BSE-SEM), energy dispersive X-ray spectroscopy (EDX), and micro-Raman spectroscopy, the composition of the mineralized biofilm around a dental implant, retrieved due to peri-implantitis, was investigated. The mineralized biofilm contains two morphologically distinct regions: (i) bacteria-containing zones (Bact+), characterized by aggregations of unmineralized and mineralized bacteria, and intermicrobial mineralization, and (ii) bacteria-free zones (Bact−), comprised mainly of randomly oriented mineral platelets. Intramicrobial mineralization, within Bact+, appears as smooth, solid mineral deposits resembling the morphologies of dental plaque bacteria. Bact− is associated with micrometer-sized Mg-rich mineral nodules. The Ca/P ratio of Bact+ is higher than Bact−. The inorganic phase of Bact+ is carbonated apatite (CHAp), while that of Bact− is predominantly octacalcium phosphate (OCP) and whitlockite (WL) inclusions. Compared with native bone, the inorganic phase of Bact+ (i.e., CHAp) exhibits higher mineral crystallinity, lower carbonate content, and lower Ca/P, C/Ca, Mg/Ca, and Mg/P ratios. The various CaPs found within the mineralized dental biofilm (CHAp, OCP, and WL) are related to the local presence/absence of bacteria. In combination with BSE-SEM and EDX, micro-Raman spectroscopy is a valuable analytical tool for nondestructive investigation of mineralized dental biofilm composition and development.

Collagen microstructure is closely related to the mechanical properties of tissues and affects cell migration through the extracellular matrix. To study these structures, three-dimensional (3D) in vitro collagen-based gels are often used, attempting to mimic the natural environment of cells. Some key parameters of the microstructure of these gels are fiber orientation, fiber length, or pore size, which define the mechanical properties of the network and therefore condition cell behavior. In the present study, an automated tool to reconstruct 3D collagen networks is used to extract the aforementioned parameters of gels of different collagen concentration and determine how their microstructure is affected by the presence of cells. Two different experiments are presented to test the functionality of the method: first, collagen gels are embedded within a microfluidic device and collagen fibers are imaged by using confocal fluorescence microscopy; second, collagen gels are directly polymerized in a cell culture dish and collagen fibers are imaged by confocal reflection microscopy. Finally, we investigate and compare the collagen microstructure far from and in the vicinities of MDA-MB 23 cells, finding that cell activity during migration was able to strongly modify the orientation of the collagen fibers and the porosity-related values.

Possible multidrug-resistant (MDR) mechanisms of four resistant strains of Escherichia coli to a model β-lactam, ampicillin, were investigated using contact angle measurements of wettability, crystal violet assays of permeability, biofilm formation, fluorescence imaging, and nanoscale analyses of dimensions, adherence, and roughness. Upon exposure to ampicillin, one of the resistant strains, E. coli A5, changed its phenotype from elliptical to spherical, maintained its roughness and biofilm formation abilities, decreased its length and surface area, maintained its cell wall integrity, increased its hydrophobicity, and decreased its nanoscale adhesion to a model surface of silicon nitride. Such modifications are suggested to allow these cells to conserve energy during metabolic dormancy. In comparison, resistant strains E. coli D4, A9, and H5 elongated their cells, increased their roughness, increased their nanoscale adhesion forces, became more hydrophilic, and increased their biofilm formation upon exposure to ampicillin. These results suggest that these strains resisted ampicillin through biofilm formation that possibly introduces diffusion limitations to antibiotics. Investigations of how MDR bacterial cells modify their surfaces in response to antibiotics can guide research efforts aimed at designing more effective antibiotics and new treatment strategies for MDR bacterial infections.

Highly-directional image artifacts such as ion mill curtaining, mechanical scratches, or image striping from beam instability degrade the interpretability of micrographs. These unwanted, aperiodic features extend the image along a primary direction and occupy a small wedge of information in Fourier space. Deleting this wedge of data replaces stripes, scratches, or curtaining, with more complex streaking and blurring artifacts—known within the tomography community as “missing wedge” artifacts. Here, we overcome this problem by recovering the missing region using total variation minimization, which leverages image sparsity-based reconstruction techniques—colloquially referred to as compressed sensing (CS)—to reliably restore images corrupted by stripe-like features. Our approach removes beam instability, ion mill curtaining, mechanical scratches, or any stripe features and remains robust at low signal-to-noise. The success of this approach is achieved by exploiting CS's inability to recover directional structures that are highly localized and missing in Fourier Space.

In recent years, nanoscale phosphors have become vital in optoelectronic applications and to understand the improved performance of nanophosphors over bulk material, detailed investigation is essential. Herein, trivalent europium-activated Y4Al2O9 phosphors were developed by solid-state reaction and solvothermal reaction methods and their performance as a function of their dimension was studied for various applications. Under 394 nm optical excitation, the photoluminescence (PL) emission, excited state lifetime of the nanophosphor, exhibits greater performance than its bulk counterpart. The homogeneous spherical structure of the nanophosphors as compared with solid lumps of bulk phosphors is the basis for almost 40% of the enhancement in nanophosphors' intense red emission compared to the bulk. Moreover, the thermal stability of the nanophosphor is much better than the bulk phosphor, which clearly indicates a key advantage of nanophosphor. The superior performance of Eu3+-doped Y4Al2O9 nanophosphors over their bulk counterparts has been demonstrated for industrial phosphor-converted light-emitting diodes and visualization of latent fingerprint.

CD34, vimentin, and vascular endothelial growth factor immunohistochemical analysis and electron microscopic tools were employed to record the initial appearance of telocytes (TCs) and stage-by-stage variations in TC localizations in the developing rabbit lung. TCs could not be identified in the primitive embryonic lung until day 18 of gestation. In the pseudoglandular lung, CD34+ TCs had been recorded under the cartilage of the main bronchus, in the wall of large-sized pulmonary vessels and large epithelial tubes. In the canalicular phase, TCs could be demonstrated in the smooth muscle layer of the bronchioles including the terminal ones. The strength of CD34 immunoreactive signals had been amplified by age until the day of parturition. Ultrastructurally, TCs consisted of a tiny body and exceptionally long telopodes (Tps). The Tp consisted of alternating thin segments (podomers) and dilated ones (podoms). The Tp sometimes branched with a dichotomous pattern. TCs interconnected in a network either by homocellular junctions with neighboring TCs or by heterocellular junctions with smooth muscle cells and alveolar cells. Collectively, early detection of TCs in pulmonary vessels suggests a potential role for TCs in their angiogenesis. For the lung tissue, TCs seem to be involved in the regulation of lung histogenesis.

Isoconcentration surfaces are commonly used to delineate phases in atom probe datasets. These surfaces then provide the spatial and compositional reference for proximity histograms, the number density of particles, and the volume fraction of particles within a multiphase system. This paper discusses the influence of the isoconcentration surface selection value on these quantitative outputs, using a simple oxide dispersive strengthened alloy, Fe91Ni8Zr1, as the case system. Zirconium reacted with intrinsic oxygen impurities in a consolidated ball-milled powder to precipitate nanoscale zirconia particles. The zirconia particles were identified by varying the Zr-isoconcentration values as well as by the maximum separation data mining method. The associated outputs mentioned above are elaborated upon in reference to the variation in this Zr isosurface value. Considering the dataset as a whole, a 10.5 at.% Zr isosurface provided a compositional inflection point for Zr between the particles and matrix on the proximity histogram; however, this value was unable to delineate all of the secondary oxide particles identified using the maximum separation method. Consequently, variations in the number density and volume fraction were observed as the Zr isovalue was changed to capture these particles resulting in a loss of the compositional accuracy. This highlighted the need for particle-by-particle analysis.