Understanding the morphological structure of membranes is essential to improve performance of membrane-based applications. In this paper, macroporous membranes were investigated and two methods introduced as an alternative for characterization of stereo-structure of the membranes. We combined the use of synchrotron X-ray nanotomography and small-angle X-ray scattering to examine the internal structure of cellulose acetate membranes with studies of the capture of surface-modified gold nanoparticles within these membranes. Finally, the morphological structures of macroporous membranes were visualized and their relationships with penetration tendency of surface-modified gold nanoparticles were explained.

A new approach for measurement of local thickness and characterization of grain boundaries is presented. The method is embodied in a software tool that helps to find and set sample orientations useful for high-resolution transmission electron microscopic (HRTEM) examination of grain boundaries in polycrystalline thin films. The novelty is the simultaneous treatment of the two neighboring grains and orienting both grains and the boundary plane simultaneously. The same metric matrix-based formalism is used for all crystal systems. Input into the software tool includes orientation data for the grains in question, which is determined automatically for a large number of grains by the commercial ASTAR program. Grain boundaries suitable for HRTEM examination are automatically identified by our software tool. Individual boundaries are selected manually for detailed HRTEM examination from the automatically identified set. Goniometer settings needed to observe the selected boundary in HRTEM are advised by the software. Operation is demonstrated on examples from cubic and hexagonal crystal systems.

Borrelia burgdorferi sensu lato, the causative agent of Lyme disease, is transmitted to humans through the bite of infected Ixodes spp. ticks. Successful infection of vertebrate hosts necessitates sophisticated means of the pathogen to escape the vertebrates’ immune system. One strategy employed by Lyme disease spirochetes to evade adaptive immunity involves a highly coordinated regulation of the expression of outer surface proteins that is vital for infection, dissemination, and persistence. Here we characterized the expression pattern of bacterial surface antigens using different microscopy techniques, from fluorescent wide field to super-resolution and immunogold-scanning electron microscopy. A fluorescent strain of B. burgdorferi spirochetes was labeled with monoclonal antibodies directed against various bacterial surface antigens. Our results indicate that OspA is more evenly distributed over the surface than OspB and OspC that were present as punctate areas.

Short illumination wavelength allows an extension of the diffraction limit toward nanometer scale; thus, improving spatial resolution in optical systems. Soft X-ray (SXR) radiation, from “water window” spectral range, λ=2.3–4.4 nm wavelength, which is particularly suitable for biological imaging due to natural optical contrast provides better spatial resolution than one obtained with visible light microscopes. The high contrast in the “water window” is obtained because of selective radiation absorption by carbon and water, which are constituents of the biological samples. The development of SXR microscopes permits the visualization of features on the nanometer scale, but often with a tradeoff, which can be seen between the exposure time and the size and complexity of the microscopes. Thus, herein, we present a desk-top system, which overcomes the already mentioned limitations and is capable of resolving 60 nm features with very short exposure time. Even though the system is in its initial stage of development, we present different applications of the system for biology and nanotechnology. Construction of the microscope with recently acquired images of various samples will be presented and discussed. Such a high resolution imaging system represents an interesting solution for biomedical, material science, and nanotechnology applications.

In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling and investigated how the pattern type and density affect the embossed depth. The main factors that affect embossed pattern qualities of roll-to-roll hot embossing, such as roller temperature, roller speed, and applied force, were determined using the response surface methodology. Eight conditions were then added to determine the time-dependent effects of heat transfer with custom-designed preheating and cooling systems. An extended preheat time for the polymethylmethacrylate substrate contributed to the significant change in the embossed depth, whereas the substrate-cooling did not exhibit a clear increasing or decreasing trend. Larger embossed depths were achieved in the horizontal patterns with lower density than in the vertical patterns, and the lower pattern densities showed greater embossed depths in most embossing conditions. We expect that this result will help to understand the effects of the pre- and posttreatment of roll-to-roll hot embossing by employing time duration factors of heat transfer, depending on the mold pattern type and density.

This study evaluated the structural and morphological differences between human and bovine primary root canals. Primary human maxillary central incisors (H) (n=9) and primary bovine incisors (B) (n=9) were selected. The roots were sectioned in the vestibular-lingual direction, planed and delimited in cervical, middle, and apical thirds. Tubule density (number of tubules per mm2) and diameter were analyzed by scanning electron microscopy (1,000 and 5,000×) using Image J 1.47 software. Data were submitted to two-way repeated measures ANOVA and Tukey tests (α=0.05). The highest tubule density was observed for B (28.527±1.717 mm2) compared with H (15.931±0.170 mm2) (p<0.01). Regarding root thirds, the cervical third presented a greater tubule density (26.417±11.654 mm2) than the apical third (17.999±5.873 mm2). The diameter of the dentin tubules was not different for cervical (3.50±0.08 µm), middle (3.45±0.30 µm) and apical thirds (3.42±0.33 µm) and substrate (H—3.29±0.14 µm; B—3.63±0.06 µm). It could be concluded that: (1) the radicular dentin structure of human and bovine primary teeth and root thirds differ in terms of the tubule density; (2) the radicular dentin morphology of human and bovine primary teeth and root thirds are similar in terms of the diameter of the dentin tubules.

Atomic force microscopy (AFM) and other forms of scanning probe microscopy have been successfully used to assess biomechanical and bioelectrical characteristics of individual cells. When extending such approaches to heterogeneous tissue, there exists the added challenge of traversing the tissue while directing the probe to the exact location of the targeted biological components under study. Such maneuvers are extremely challenging owing to the relatively small field of view, limited availability of reliable visual cues, and lack of context. In this study we designed a system that leverages the visual topology of the serial tissue sections of interest to help guide robotic control of the AFM stage to provide the requisite navigational support. The process begins by mapping the whole-slide image of a stained specimen with a well-matched, consecutive section of unstained section of tissue in a piecewise fashion. The morphological characteristics and localization of any biomarkers in the stained section can be used to position the AFM probe in the unstained tissue at regions of interest where the AFM measurements are acquired. This general approach can be utilized in various forms of microscopy for navigation assistance in tissue specimens.

The discrete Fourier transform is among the most routine tools used in high-resolution scanning/transmission electron microscopy (S/TEM). However, when calculating a Fourier transform, periodic boundary conditions are imposed and sharp discontinuities between the edges of an image cause a cross patterned artifact along the reciprocal space axes. This artifact can interfere with the analysis of reciprocal lattice peaks of an atomic resolution image. Here we demonstrate that the recently developed Periodic Plus Smooth Decomposition technique provides a simple, efficient method for reliable removal of artifacts caused by edge discontinuities. In this method, edge artifacts are reduced by subtracting a smooth background that solves Poisson’s equation with boundary conditions set by the image’s edges. Unlike the traditional windowed Fourier transforms, Periodic Plus Smooth Decomposition maintains sharp reciprocal lattice peaks from the image’s entire field of view.

Shear bond strength (SBS) and the interfacial adaptation (IA) of self-adhesive resin (SAR) composites to dentin were evaluated. Two SARs [Vertise Flow (VTF) and Fusio Liquid Dentin (FLD)] were evaluated and compared with a conventional restorative system [adhesive: OptiBond FL and composite: Herculite Précis (OBF/HP)]. Human third molars were used for SBS testing and IA imaging (n=7) using optical coherence tomography (OCT). Flattened dentin disks were prepared and the composites were applied into molds (2.4 mm diameter) that were positioned on dentin. Samples were subjected to SBS testing and OCT analysis, which considered an increase in signal intensity at the bonded interface as evidence of internal gaps. SBS data were analyzed by one-way analysis of variance and Tukey’s test and IA data (% distribution of high brightness values) by Kruskal–Wallis and Dunn’s test (p≤0.05). No statistically significant difference in SBS was observed between VTF (13.9±3.6 MPa) and FLD (11.3±3.2 MPa), whereas OBF/HP showed higher average strength (27.3±6.1 MPa). However, there was a statistically significant difference in IA when VTF (33.3%) was compared with FLD (1.2%) and OBF/HP (1.5%). The conventional restorative system exhibited superior SBS performance compared with SARs. However, the IA of FLD to dentin had values that were not significantly different from OBF/HP.