Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

Extended abstract of a paper presented at Microscopy and Microanalysis 2005 in Honolulu, Hawaii, USA, July 31--August 4, 2005

Plasmodium falciparum causes the most severe/lethal form of malaria, a parasitic infection that affects 500 million people worldwide and leads to the death of nearly one million/year, about 91% being due to P. falciparum. The malaria pigment or hemozoin crystals (HZ) are formed in an enzyme-independent polymerization of heme released during haemoglobin digestion by the parasite during the intra-erythrocytic life cycle. The quinoline and artemisinin based antimalarials (the only available treatment options) appear to act by disrupting the formation of HZ. Therefore, the development of antimalarial agents based on the physicochemical process of heme crystallization appears a good option to drug design.

We have produced β-haematin following an assay adapted from the method described by Basilico et al, with modifications. Briefly, hemin (ferriprotoporphyrin IX chloride; Sigma-Aldrich) was dissolved NaOH and polymerized by the addition of acetic acid and incubation at 37°C. Resulting pellet washed with dimethyl sulfoxide (DMSO) to remove unpolymerized hemin and resuspended in H2O. To extract native HZ (nHZ) from P. falciparum (clone Dd2)-infected erythrocytes, when parasitemia reached >10%, parasites were harvested by saponin lysis, washed with phosphate-buffered saline (PBS) and sonicated in 2% sodium dodecyl sulfate (SDS), further washed in 2% SDS and pellet was resuspended (10 mM Tris-HCl (pH 8.0); 0.5% SDS; 2mg/ml of proteinase K) and incubated at 37°C overnight. The nHZ pellet was washed in 2% SDS and in distilled H2O, then resuspended in distilled H2O water and sonicated again prior to use to minimize aggregation and maintain the nHZ in suspension. β-haematin and native nHZ crystals were analysed by Scanning Electron Microscopy (JEOL 7001FSEM) (Fig.1; A, B.1 and C.1) and Transmission Electron Microscopy (Hitachi H8100) (Fig.1; B.2 and C.2).

Here we report the crystal morphology of nHZ produced by the Plasmodium falciparum clone Dd2 and of β-haematin produced with the above protocol. Chemically, HZ is a stable dimer of iron(III)(protoporphyrin[PP]-IX), also known as β-hematin and consists of heme units dimerized through reciprocal iron-carboxylate bonds. Even though the parasite nHZ and synthetic β-hematin are isostructural, there are large differences in the crystal morphologies of nHZ (Dd2) and β-hematin as evidenced by SEM and TEM images (Fig.1). nHZ crystals are remarkably uniform in size and shape, adopting a parallelipede morphology with high aspect ratio of about 800x200x200 nm (Fig. 1 C1 and C2). Different protocols to prepare β-haematin yield diverse material, which can be poorly crystalline and heterogeneous within the same sample. The present results show that β-haematin is rather homogeneous and constituted by needle-like particles of sizes similar to those presented by nHZ ones (compare B1 with C1). Higher resolution observations evidence differences between the β-haematin and nHZ materials, since the latter seems constituted by uniform flat layers and the former shows flaked ones (Fig. B2).

Morphology seems to be of biological relevance, since structure-function studies revealed that the size and shape of the synthetic crystals influence their ability to activate, for instance, the inflammatory responses in vitro and in vivo. Several protocols have been developed to measure drug inhibition of heme crystallization in vitro although it has been difficult to standardize these assays. In the present study, we report a new method for β-haematin preparation that renders homogenous crystals, both in shape and size, favourable for reproducible drug inhibition of heme crystallization assays.

This work was supported by CMDT through PEst-OE/SAU/LA0018/2011 grant and FCT through PTDC/SAU-FAR/114864/2009 and PEst-OE/CTM-UI0084/2011 grants.

The dehydrogenated microstructure of the lithium borohydride-yttrium hydride (LiBH4-YH3) composite obtained at 350°C under 0.3 MPa of hydrogen and static vacuum was investigated by transmission electron microscopy combined with a focused ion beam technique. The dehydrogenation reaction between LiBH4 and YH3 into LiH and YB4 takes place under 0.3 MPa of hydrogen, which produces YB4 nano-crystallites that are uniformly distributed in the LiH matrix. This microstructural feature seems to be beneficial for rehydrogenation of the dehydrogenation products. On the other hand, the dehydrogenation process is incomplete under static vacuum, leading to the unreacted microstructure, where YH3 and YH2 crystallites are embedded in LiBH4 matrix. High resolution imaging confirmed the presence of crystalline B resulting from the self-decomposition of LiBH4. However, Li2B12H12, which is assumed to be present in the LiBH4 matrix, was not clearly observed.

Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2006

Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2006

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.