Two related aspects of nano-droplet condensation and droplets coalescence are studied for droplets on self-supported thin water films. The experiments are conducted in the environmental scanning electron microscope using wet scanning transmission electron microscopy. Favorable condensation sites are examined and in-situ position-controlled condensation experiments are conducted. The interaction among condensed multi-droplets as well as between a single droplet and the underneath nano-thick water film are dynamically examined with 10nm lateral resolution. The droplet round shape is reshaped to flat-like facets in-between droplets of 30-230 nm separation. Dynamic imaging of a few minutes duration shows a delayed coalescence effect, being explained by increased droplet-droplet electrostatic interaction relative to van der Waals interaction.

The use of analytical spectroscopies during scanning/transmission electron microscope (S/TEM) investigations of micro- and nano-scale structures has become a routine technique in the arsenal of tools available to today’s materials researchers. Essential to implementation and successful application of spectroscopy to characterization is the integration of numerous technologies, which include electron optics, specimen holders, and associated detectors. While this combination has been achieved in many instrument configurations, the integration of X-ray energy-dispersive spectroscopy and in situ liquid environmental cells in the S/TEM has to date been elusive. In this work we present the successful incorporation/modifications to a system that achieves this functionality for analytical electron microscopy.

The details of ice interface dynamics in complex systems are critical to a variety of natural and commercial processes. A platform for low temperature environmental transmission electron microscopy is developed and applied to characterization of ice crystallization in colloidal solutions. The platform is utilized for studying the phase evolution in ice during crystallization and the dynamic interactions of Au nanoparticles at the crystallization front. The results indicate that models developed to treat ice–particle interactions at the micron scale extend well to the nanoscale.

Understanding the fundamental properties of macromolecules has enhanced the development of emerging technologies used to improve biomedical research. Currently, there is a critical need for innovative platforms that can illuminate the function of biomedical reagents in a native environment. To address this need, we have developed an in situ approach to visualize the dynamic behavior of biomedically relevant macromolecules at the nanoscale. Newly designed silicon nitride devices containing integrated “microwells” were used to enclose active macromolecular specimens in liquid for transmission electron microscopy imaging purposes.We were able to successfully examine novel magnetic resonance imaging contrast reagents, micelle suspensions, liposome carrier vehicles, and transcribing viral assemblies. With each specimen tested, the integrated microwells adequately maintained macromolecules in discrete local environments while enabling thin liquid layers to be produced.

Scanning transmission electron microscopy (STEM) of specimens in liquid, so-called Liquid STEM, is capable of imaging the individual subunits of macromolecular complexes in whole eukaryotic cells in liquid. This paper discusses this new microscopy modality within the context of state-of-the-art microscopy of cells. The principle of operation and equations for the resolution are described. The obtained images are different from those acquired with standard transmission electron microscopy showing the cellular ultrastructure. Instead, contrast is obtained on specific labels. Images can be recorded in two ways, either via STEM at 200 keV electron beam energy using a microfluidic chamber enclosing the cells, or via environmental scanning electron microscopy at 30 keV of cells in a wet environment. The first series of experiments involved the epidermal growth factor receptor labeled with gold nanoparticles. The labels were imaged in whole fixed cells with nanometer resolution. Since the cells can be kept alive in the microfluidic chamber, it is also feasible to detect the labels in unfixed, live cells. The rapid sample preparation and imaging allows studies of multiple whole cells.

The characterization of biological and inorganic materials by determining their three-dimensional structure in conditions closer to their native state is a major challenge of technological research. Environmental scanning electron microscopy (ESEM) provides access to the observation of hydrated samples in water environments. Here, we present a specific device for ESEM in the scanning transmission electron microscopy mode, allowing the acquisition of tilt-series suitable for tomographic reconstructions. The resolution which can be obtained with this device is first determined. Then, we demonstrate the feasibility of tomography on wet materials. The example studied here is hydrophilic mesoporous silica (MCM-41). Finally, the minimum thickness of water which can be detected is calculated from Monte Carlo simulations and compared with the resolution expected in the tomograms.

The introduction of gases, such as water vapor, into an environmental scanning electron microscope is common practice to assist in the imaging of insulating or biological materials. However, this capability may also be exploited to introduce, or form, liquid phase precursors for electron-beam-induced deposition. In this work, the authors report the deposition of silver (Ag) and copper (Cu) structures using two different cell-less in situ deposition methods—the first involving the in situ hydration of solid precursors and the second involving the insertion of liquid droplets using a capillary style liquid injection system. Critically, the inclusion of surfactants is shown to drastically improve pattern replication without diminishing the purity of the metal deposits. Surfactants are estimated to reduce the droplet contact angle to below ~10°.

Direct in situ visualization of nanoparticles in a liquid is an important challenge of modern electron microscopy. The increasing significance of bottom-up methods in nanotechnology requires a direct method to observe nanoparticle interactions in a liquid as the counterpart to the ex situ electron microscopy and indirect scattering and spectroscopy methods. Especially, the self-assembly of anisometric nanoparticles represents a difficult task, and the requirement to trace the route and orientation of an individual nanoparticle is of highest importance. In our approach we utilize scanning transmission electron microscopy under environmental conditions to visualize the mobility and self-assembly of cetyltrimethylammonium bromide (CTAB)-capped gold nanorods (AuNRs) in an aqueous colloidal solution. We directly observed the drying-mediated AuNR self-assembly in situ during rapid evaporation of a colloidal droplet at 4°C and pressure of about 900 Pa. Several types of final AuNR packing were documented including side-by-side oriented chains, tip-to-tip loosely arranged nanorods, and domains of vertically aligned AuNR arrays. The effect of local heating by electron beam is used to qualitatively asses the visco-elastic properties of the formed AuNR/CTAB/water membrane. Local heating induces the dehydration and contraction of a formed membrane indicated either by its rupture and/or by movement of the embedded AuNRs.

Drug release from oral pharmaceutical formulations can be modified by applying a polymeric coating film with controlled mass transport properties. Interaction of the coating film with water may crucially influence its composition and permeability to both water and drug. Understanding this interaction between film microstructure, wetting, and mass transport is important for the development of new coatings. We present a novel method for controlled wetting of polymer coating films in an environmental scanning electron microscope, providing direct visual information about the processes occurring as the film goes from dry to wet. Free films made of phase-separated blends of water-insoluble ethyl cellulose (EC) and water-soluble hydroxypropyl cellulose (HPC) were used as a model system, and the blend ratio was varied to study the effect on the water transport properties. Local variations in water transport through the EC/HPC films were directly observed, enabling the immediate analysis of the structure–mass transport relationships. The leaching of HPC could be studied by evaporating water from the films in situ. Significant differences were observed between films of varying composition. The method provides a valuable complement to the current approach of making distinct diffusion and microscopy experiments for studying the dynamic interaction of polymer films with water.

The origin of the condensation of water begins at the nanoscale, a length-scale that is challenging to probe for liquids. In this work we directly image heterogeneous nucleation of water nanodroplets by in situ transmission electron microscopy. Using gold nanoparticles bound to a flat surface as heterogeneous nucleation sites, we observe nucleation and growth of water nanodroplets. The growth of nanodroplet radii follows the power law: R(t)~(t−t0)β, where β~0.2−0.3.

Coalescence is a significant pathway for the growth of nanostructures. Here we studied the coalescence of Bi nanoparticles in situ by liquid cell transmission electron microscopy (TEM). The growth of Bi nanoparticles was initiated from a bismuth neodecanoate precursor solution by electron beam irradiation inside a liquid cell under the TEM. A significant number of coalescence events occurred from the as-grown Bi nanodots. Both symmetric coalescence of two equal-sized nanoparticles and asymmetric coalescence of two or more unequal-sized nanoparticles were analyzed along their growth trajectories. Our observation suggests that two mass transport mechanisms, i.e., surface diffusion and grain boundary diffusion, are responsible for the shape evolution of nanoparticles after a coalescence event.

Recent ex situ observations of crystallization in both natural and synthetic systems indicate that the classical models of nucleation and growth are inaccurate. However, in situ observations that can provide direct evidence for alternative models have been lacking due to the limited temporal and spatial resolution of experimental techniques that can observe dynamic processes in a bulk solution. Here we report results from liquid cell transmission electron microscopy studies of nucleation and growth of Au, CaCO3, and iron oxide nanoparticles. We show how these in situ data can be used to obtain direct evidence for the mechanisms underlying nanoparticle crystallization as well as dynamic information that provide constraints on important energetic parameters not available through ex situ methods.

The drying effect associated with utilizing transmission electron microscopy to study deoxyribonucleic acid (DNA)-coated gold nanoparticles (AuNPs) remains largely uninvestigated, though this technique is frequently utilized to characterize nanoparticle–DNA interactions. Investigation of the drying effect is essential to the progress of the many fields that utilize AuNPs, including cancer research. In this study, we compare DNA hybridization-directed nanoparticle assemblies with control samples omitting the necessary complementary DNA, effectively blocking directed assembly, in both the liquid state and the dry state, within a scanning transmission electron microscope. We show that the dry samples contain AuNPs spaced at significantly smaller intervals than identical samples measured in situ, with no dependence on the DNA bound to the AuNPs in the dry samples. A partially wet sample, with distances measured along the drying edge, provided an intermediate binding distance, strengthening the conclusion that drastic differences observed between the dry and in situ samples are due to a pronounced drying effect. This drying effect will falsely indicate certain grouping arrangements and will change the impression of the size of the groups formed, providing misinformation for the development of these controlled assemblies that could impact applications such as targeted drug vehicles for cancer treatment.

Electron microscopy of enclosed liquid samples requires the thinnest possible membranes as enclosing windows as well as nanoscale liquid sample thickness to achieve the best possible resolution. Today liquid sample systems for transmission electron microscopy (TEM) are typically made from two sandwiched microchips with thin membranes. We report on a new microfabricated chip system based on a monolithic design that enables membrane geometry on the scale of a few micrometers. The design is intended to reduce membrane deflection when the system is under pressure, a microfluidic channel for improved flow geometry, and a better space angle for auxiliary detectors such as energy-dispersive X-ray spectroscopy. We explain the system design and fabrication and show the first successful TEM images of liquid samples in the chips.

Insight into dynamic electrochemical processes can be obtained with in situ electrochemical-scanning/transmission electron microscopy (ec-S/TEM), a technique that utilizes microfluidic electrochemical cells to characterize electrochemical processes with S/TEM imaging, diffraction, or spectroscopy. The microfluidic electrochemical cell is composed of microfabricated devices with glassy carbon and platinum microband electrodes in a three-electrode cell configuration. To establish the validity of this method for quantitative in situ electrochemistry research, cyclic voltammetry (CV), choronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) were performed using a standard one electron transfer redox couple [Fe(CN)6]3−/4−-based electrolyte. Established relationships of the electrode geometry and microfluidic conditions were fitted with CV and chronoamperometic measurements of analyte diffusion coefficients and were found to agree with well-accepted values that are on the order of 10−5 cm2/s. Influence of the electron beam on electrochemical measurements was found to be negligible during CV scans where the current profile varied only within a few nA with the electron beam on and off, which is well within the hysteresis between multiple CV scans. The combination of experimental results provides a validation that quantitative electrochemistry experiments can be performed with these small-scale microfluidic electrochemical cells provided that accurate geometrical electrode configurations, diffusion boundary layers, and microfluidic conditions are accounted for.

One of the fundamental challenges in understanding the early stages of corrosion pitting in metals protected with an oxide film is that there are relatively few techniques that can probe microstructure with sufficient resolution while maintaining a wet environment. Here, we demonstrate that microstructural changes in Al thin films caused by aqueous NaCl solutions of varying chloride concentrations can be directly observed using a liquid flow cell enclosed within a transmission electron microscope (TEM) holder. In the absence of chloride, Al thin films did not exhibit significant corrosion when immersed in de-ionized water for 2 days. However, introducing 0.01 M NaCl solutions led to extensive random formation of blisters over the sample surface, while 0.1 M NaCl solutions formed anomalous structures that were larger than the typical grain size. Immersion in 1.0 M NaCl solutions led to fractal corrosion consistent with previously reported studies of Al thin films using optical microscopy. These results show the potential of in situ liquid cell electron microscopy for probing the processes that take place before the onset of pitting and for correlating pit locations with the underlying microstructure of the material.

High-throughput immuno-electron microscopy is required to capture the protein–protein interactions realizing physiological functions. Atmospheric scanning electron microscopy (ASEM) allows in situ correlative light and electron microscopy of samples in liquid in an open atmospheric environment. Cells are cultured in a few milliliters of medium directly in the ASEM dish, which can be coated and transferred to an incubator as required. Here, cells were imaged by optical or fluorescence microscopy, and at high resolution by gold-labeled immuno-ASEM, sometimes with additional metal staining. Axonal partitioning of neurons was correlated with specific cytoskeletal structures, including microtubules, using primary-culture neurons from wild type Drosophila, and the involvement of ankyrin in the formation of the intra-axonal segmentation boundary was studied using neurons from an ankyrin-deficient mutant. Rubella virus replication producing anti-double-stranded RNA was captured at the host cell’s plasma membrane. Fas receptosome formation was associated with clathrin internalization near the surface of primitive endoderm cells. Positively charged Nanogold clearly revealed the cell outlines of primitive endoderm cells, and the cell division of lactic acid bacteria. Based on these experiments, ASEM promises to allow the study of protein interactions in various complexes in a natural environment of aqueous liquid in the near future.

The recent development of in-situ liquid stages for (scanning) transmission electron microscopes now makes it possible for us to study the details of electrochemical processes under operando conditions. As electrochemical processes are complex, care must be taken to calibrate the system before any in-situ/operando observations. In addition, as the electron beam can cause effects that look similar to electrochemical processes at the electrolyte/electrode interface, an understanding of the role of the electron beam in modifying the operando observations must also be understood. In this paper we describe the design, assembly, and operation of an in-situ electrochemical cell, paying particular attention to the method for controlling and quantifying the experimental parameters. The use of this system is then demonstrated for the lithiation/delithiation of silicon nanowires.

From a biological point of view, casting refers to filling of anatomical and/or pathological spaces with extraneous material that reproduces a three-dimensional replica of the space. Casting may be accompanied by additional procedures such as corrosion, in which the soft tissue is digested out, leaving a clean cast, or the material may be mixed with radiopaque substances to allow x-ray photography or micro computed topography (µCT) scanning. Alternatively, clearing of the surrounding soft tissue increases transparency and allows visualization of the casted cavities. Combination of casting with tissue fixation allows anatomical dissection and didactic surgical procedures on the tissue. Casting materials fall into three categories namely, aqueous substances (India ink, Prussian blue ink), pliable materials (gelatins, latex, and silicone rubber), or hard materials (methyl methacrylates, polyurethanes, polyesters, and epoxy resins). Casting has proved invaluable in both teaching and research and many phenomenal biological processes have been discovered through casting. The choice of a particular material depends inter alia on the targeted use and the intended subsequent investigative procedures, such as dissection, microscopy, or µCT. The casting material needs to be pliable where anatomical and surgical manipulations are intended, and capillary-passable for ultrastructural investigations.