Bentonite is an abundant natural resource in the Maghnia region of Algeria that may have potential value in catalysis, but heretofore has been considered of low value for this purpose due to its low acidity and low catalytic activity. Low cost is one of the main criteria for choosing a suitable material for catalysis. Because bentonite is abundant and low-cost, its use as a starting material for the preparation of catalysts deserves reconsideration. The present study was undertaken, therefore, to optimize the performance of bentonite as a catalyst in one of the most promising reactions in organic synthesis, namely, cyclohexene epoxidation. The bentonite was subjected to adjustment of its structure by means of a number of laboratory treatments based on its large cation exchange capacity. These modifications aimed to achieve an environmentally friendly catalytic process by incorporating transition metals, specifically titanium and vanadium, into the modified bentonite structure through acid activation. Redox properties were enhanced and Lewis and Brønsted acidities were introduced. The vanadium oxide, supported on titania-pillared, acid-activated bentonite (5V/Ti-AAC), was characterized comprehensively using various techniques, including diffuse-reflectance UV-visible spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FTIR) for surface acidity analysis, X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, and scanning electron microscopy (SEM) coupled with energy-dispersive X-ray elemental analysis (EDX). The catalytic activity was investigated in response to certain variables, such as catalyst mass, nature of the solvent, amount of oxidant, and reaction temperature. A kinetic study was conducted to understand the reaction behavior. The experimental results demonstrated intriguing catalytic activity, achieving a 42% conversion rate with ~68% selectivity toward the epoxide product when employing tert-butyl hydroperoxide (TBHP) as the oxidant and heptane as the solvent. This study highlights the potential of 5V/Ti-AAC as an environmentally friendly catalyst applied in the epoxidation of cyclohexene.

A unique vanadium-titanium-bearing mixed-layered clay is currently being mined as an ore of vanadium at Potash Sulphur Springs, AR. The clay contains 80% expandable portion and has both a 14.22 and 18.24 Å hydration state in addition to the 9.49 Å dehydrated state; ethylene glycol expands this material to 16.69 Å. The 060 reflection for all hydration states is between 1.50 and 1.51 Å indicating the material is dioctahedral. The “mean chemical formula” calculates as(Ca0.08 K0.02 Na0.03)0.13 (Al0.11 V0.90 Ti0.19 Fe0.64 Mg0.14)1.98 (Si3.79 Al0.21)4 O10 (OH)2·nH2O.

The electron spin resonance (ESR) spectra of varying quantities of vanadyl ion (VO2+) adsorbed on hydrated hectorite indicated that hydrolysis of VO2+ was promoted at low levels of adsorption. The hydrolyzed product was adsorbed on the clay surfaces, with a ligand environment that was partially aqueous and partially hydroxide in nature. Greater amounts of VO2+ adsorbed on wetted hectorite obscured the ESR spectrum of the strongly adsorbed hydrolysis product with a solutionlike spectrum. An approximately 50% reduction in rotational mobility of VO2+ relative to solution was indicated by the linewidth of this spectrum. Loss in mobility occurred with reduction of the interlamellar spacing until, under strongly dehydrating conditions, the VO(H2O)52+ ions became aligned with the V=O bond axis normal to the plane of the clay platelets.

An unusual vanadium chlorite precipitated during the formation of a vanadium-uranium ore deposit in the Henry Basin, southeastern Utah. The ore deposit formed by reduction and precipitation of U and V in the presence of organic matter at the interface between a stagnant brine and overlying, circulating meteoric water. Some samples of the vanadium chlorite (heated before analysis) contain ≥ 10% V2O5. In fresh samples, most of the vanadium is in the trivalent oxidation state. X-ray powder diffraction data suggest that Fe and V are concentrated preferentially in the interlayer hydroxide sheets of the chlorite. A d(060) value of 1.52 Å indicates that the chlorite probably has a dioctahedral structure which is distended by the presence of octahedral Fe and V. The vanadium ore zone is flanked by peripheral zones containing perfectly ordered chlorite/smectite. This chlorite/smectite contains much less V than the pure chlorite. This chlorite may have formed by the progressive precipitation of vanadium-rich interlayer hydroxide sheets in the mixed-layer chlorite/smectite in the most reducing portion of the ore zone. The pure chlorite is a IIb polytype, which, for nonvanadiferous analogs, is ordinarily found in high-temperature environments; however, no evidence exists to show that these rocks have ever been exposed to elevated temperatures. In fact, the presence of unreacted smectite in a potassium-rich setting and the low vitrinite reflectance of coalified plant debris indicate a low-temperature history for these sediments.

A combined application of electron paramagnetic resonance (EPR) and Fourier-transform infrared (FTIR) spectroscopies with thermal methods was used to determine the chemical form of V(IV) in a Georgia kaolinite (KGa-I). Precise values of the EPR spectroscopic g-values and hyperfine coupling constants were obtained for an untreated sample (g∥ = 1.940, A∦ = 18.71 mT; g⊥ = 1.966, A⊥ = 7.63 mT). Heating the sample to 1000°C in steps while monitoring phase changes with EPR and FTIR spectra led to the following structural interpretations: 1) Vanadium (IV) occurs almost entirely as an isomorphically substituted species in the octahedral sheet of KGa-1 kaolinite; 2) during the dehydroxylation of kaolinite at about 500°C and the subsequent formation of metakaolinite, V(IV)-substituted octahedral sites are readily converted into truncated octahedra exhibiting fourfold coordination; and 3) in these highly distorted four-coordinated sites, V(IV) is metastable, being completely oxidized at about 800°C.

The composition and origin of vanadium-bearing clay minerals in the Jurassic (Morrison and Entrada Formations) sandstones of the Colorado Plateau are reassessed using microanalyses (microprobe and scanning electron microscope). The main V-clays are authigenic illite and chlorite of various petrologic habits: clay casts and matrix, pore lining, replacement of detrital grains. The chemical composition of the V-clays is similar in three different localities in the Morrison Formation separated by about 50 km, suggesting that the V-clays are the result of a large regional event. In both illite and chlorite, Al and V are inversely correlated, showing that V replaces Al in the octahedral position. The chlorite contains a complex mixture of divalent and trivalent cations that cannot fit within a sudoite structure. A classification of V-micas is proposed that employs V3+/sum of the octahedral cations vs. the sum of the interlayer charges. V-illite and roscoelite from the Colorado Plateau are characteristic of diagenetic/hydrothermal environments. For a given locality the composition of the V-clays does not vary with habit, showing that these minerals formed at thermodynamic equilibrium.

The Mecca Quarry Shale Member from Velpen, Indiana contains abundant vanadium which occurs in solid solution within illite-rich illite-smectite (I-S) having an average content of 1.65 wt. % V, and an overall composition of K0.8(Al2.8Mg0.5Fe0.4V0.3)(Si7.2Al0.8 g)O20(OH)4, analogous to the V-rich dioctahedral mica, roscoelite. The illite contains more than twice as much V as the associated kerogen. Detrital mica has a composition typical of 2M1, muscovite and contains no vanadium. The V-rich illite has a structure and composition typical of formation during normal prograde diagenesis and probably is widespread in the Mecca Quarry Shale because the bed is enriched in V throughout the Midwest. The smectite-to-illite reaction can not be a result of passive burial metamorphism because the host strata were buried no deeper than ~0.5 km at Velpen. The formation of illite occurred in unlithified sediments at shallow depths under the influence of pervasive 80–110°C basinal brines, possibly the same fluids that were responsible for the Mississippi Valley-type lead-zinc mineralization common in the Midwest. The presence of two types of K-rich phyllosilicates may be part of the reason for the lack of correlation between bulk V concentrations and the intensities of X-ray diffraction peaks of illite reported by others.

Vanadium is the dominant trace element and chromophore in tanzanite, the most valued gemmological variety of zoisite. The structure of zoisite–tanzanite was obtained by structural refinement to assess the vanadium location in the zoisite structure. However, the small V content in tanzanite evidenced by electron microprobe and laser ablation inductively coupled plasma mass spectrometry limits the exact determination of the V position in the zoisite structure. Structural refinement revealed that the average bond length of the less distorted M1,2O6 octahedron is below 1.90 Å, and M3O6 has slightly longer bonds with an average of ca. 1.96 Å. The M1,2 site is slightly overbonded with a bond-valence sum (BVS) of 3.03 vu, whereas M3 is slightly underbonded (BVS = 2.78 vu). Optical absorption spectra revealed that most V is trivalent, but a small portion is probably in a four-valent state. Therefore, crystal field Superposition Model and Bond-Valence Model calculations were applied based on several necessary assumptions: (1) V occupies octahedral sites; and (2) it can occur in two oxidation states, V3+ or V4+. Crystal field Superposition Model calculations from the optical spectra indicated that V3+ prefers occupying the M1,2 site; the preference of V4+ from the present data was impossible to determine. Bond-Valence Model calculations revealed no unambiguous preference for V3+, although simple bond-length calculation suggests the preference of the M3 site. However, it is quite straightforward that the M1,2 site is better suitable for V4+. If the possible octahedral distortion is considered, the M1,2O6 octahedron is subject to a smaller change in distortion if occupied by V3+ than the M3O6 octahedron. Consequently, considering the results of both the crystal field Superposition Model and Bond-Valence Model calculations, we assume that both V3+ and V4+ prefer the M1,2 site.

The new mineral bianchiniite, Ba2(Ti4+V3+)(As2O5)2OF, has been discovered in the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy. It occurs as brown {001} tabular crystals, up to 1 mm across, with a vitreous lustre. It is brittle, with a perfect {001} cleavage. Streak is brownish. In reflected light, bianchiniite is grey, with orange–yellow internal reflections. It is weakly bireflectant, with a very weak anisotropy in shades of grey. Minimum and maximum reflectance data for COM wavelengths [Rmin/Rmax (%), (λ, nm)] are: 5.0/5.8 (470), 5.7/6.5 (546), 5.7/7.0 (589) and 5.2/6.3 (650). Electron microprobe analyses gave (wt.% – average of 10 spot analyses): TiO2 10.34, V2O3 3.77, Fe2O3 3.76, As2O3 44.36, Sb2O3 0.22, SrO 0.45, BaO 34.79, PbO 0.28, F 1.77, sum 99.74, –O = F –0.75, total 98.99. On the basis of 12 anions per formula unit, the empirical formula of bianchiniite is (Ba2.00Sr0.04Pb0.02)Σ2.06(Ti4+1.14V3+0.44Fe3+0.42)Σ2.00[(As3.96Sb0.02)Σ3.98O10](O1.18F0.82)Σ2.00. Bianchiniite is tetragonal, space group I4/mcm, with unit-cell parameters a = 8.7266(4), c = 15.6777(7) Å, V = 1193.91(12) Å3 and Z = 8. Its crystal structure was refined from single-crystal X-ray diffraction data to R1 = 0.0134 on the basis of 555 unique reflections with Fo > 4σ(Fo) and 34 refined parameters. The crystal structure shows columns of corner-sharing [Ti/(V,Fe)]-centred octahedra running along c, connected along a and b through (As2O5) dimers. A {001} layer of Ba-centred [10+2]-coordinated polyhedra is intercalated between (As2O5) dimers. Bianchiniite has structural relations with fresnoite- and melilite-group minerals. The name honours the two mineral collectors Andrea Bianchini (b. 1959) and Mario Bianchini (b. 1962) for their contribution to the knowledge of the mineralogy of pyrite ± baryte ± iron-oxide ore deposits from the Apuan Alps.

Biogenic nanoscale vanadium magnetite is produced by converting V(V)-bearing ferrihydrites through reductive transformation using the metal-reducing bacterium Geobacter sulfurreducens. With increasing vanadium in the ferrihydrite, the amount of V-doped magnetite produced decreased due to V-toxicity which interrupted the reduction pathway ferrihydrite–magnetite, resulting in siderite or goethite formation. Fe L2,3 and V L2,3 X-ray absorption spectra and data from X-ray magnetic circular dichroism analysis revealed the magnetite to contain the V in the Fe(III) Oh site, predominately as V(III) but always with a component of V(VI), present a consistent V(IV)/V(III) ratio in the range 0.28 to 0.33. The bacteriogenic production of V-doped magnetite nanoparticles from V-doped ferrihydrite is confirmed and the work reveals that microbial reduction of contaminant V(V) to V(III)/V(IV) in the environment will occur below the Fe-redox boundary where it will be immobilised in biomagnetite nanoparticles.

Several generations of chamosite, including a red variety, occur in the Ordovician hydrothermalized oolitic ironstone from Saint-Aubin-des-Châteaux (Armorican Massif, France). Their chemical re-examination indicates a low Mg content (0.925 < Fe/(Fe + Mg) < 0.954), but a significant variation in IVAl. Minor vanadium is present at up to 1.1 wt.% oxide. Variations in IVAl, the vanadium content and the colour of chamosite are related to the hydrothermal reworking of the ironstone. Taking into account other published data, the ideal composition of chamosite is (Fe5–xAl1+x)(Si3–xAl1+x)O10(OH)8, with 0.2 < x < 0.8 (0.2: equilibrium with quartz; 0.8: SiO2 deficit). The red chamosite (IIb polytype) has a mean composition of (Fe3.87Mg0.23Mn0.01□0.07Al1.74V0.07)(Si2.33Al1.67)O10(OH)8. This chamosite is strongly pleochroic, from pale yellow (E || (001)) to deep orange red (E ⊥ (001)). Visible–near-infrared absorbance spectra show a specific absorption band centred at ~550 nm for E ⊥ (001), due to a proposed new variety of Fe/V intervalence charge-transfer mechanism in the octahedral sheet, possibly Fe2+ – V4+ → Fe3+ – V3+. While the formation of green chamosite varieties is controlled by reducing conditions due to the presence of organic matter as a buffer, that of red chamosite would indicate locally a weak increase of fO2 related to oxidizing hydrothermal solutions.

Electron paramagnetic resonance (EPR) spectra of different particle size fractions of four kaolins from diverse sources in North America, Europe and Asia have been investigated in order to characterize their paramagnetic properties and heterogeneity. There were major differences in the sources of the EPR signals from transition metals; V and Mn were structural, Fe was both structural and as associated oxides, and Cu was in the form of an adsorbed ion. The radiation-induced free radical signals commonly known as the A- and B-centres were observed in three of the deposits; however, in addition to the previously reported 27Al hyperfine structure associated with the B-centre, we also observed much smaller 27Al hyperfine structure on the g┴ feature of the A-centre. The other kaolin sample produced four free radical signals that have not previously been reported in kaolins. Each had substantial 1H hyperfine splitting; three are interpreted as corresponding to defect centres associated with Si-OH groups, and the other to a Si hole surrounded by protonated O atoms. The EPR spectra changed progressively with particle size, and measurements on the Asian specimens after grinding showed major differences in the Fe3+ signals from the same particle size fractions separated from the natural samples, thus supporting previous reports that grinding results in major structural changes in the minerals.

Goldmanite, the vanadium analogue of grossular and andradite, was found as subrounded green porphyroblasts ranging from 0.1 to 1.7 mm in size in the carbonaceous black slates from the Deokpyeong area of the Ogcheon belt in Korea. A radiating aggregate of slightly curved blades of goldmanite crystals displays birefringence and replaces the fine-grained black matrix. The V2O3 content ranges from 21.9 to 26.6 wt.% (24.0 wt.% average), higher than previously reported values. The calculated mole % of the goldmanite end-member ranges from 72 to 91. Its cell dimension was calculated to be 12.04 Å from X-ray diffraction. The black slate in the Deokpyeong area is the richest known accessible source of relatively pure goldmanite.

The new mineral, vanadoallanite-(La), found in the stratiform ferromanganese deposit from the Shobu area, Ise City, Mie Prefecture, Japan, was studied using electron microprobe analysis and single-crystal X-ray diffraction methods. Vanadoallanite-(La) is a rare-earth element-rich monoclinic epidote-supergroup mineral with simplified formula CaLaV3+AlFe2+(SiO4)(Si2O7)O(OH) (Z = 2, space group P21/m) characterized by predominantly V3+ at one of three octahedral sites, M1. The crystal studied shows large V (∼8.4 V2O3 wt.%), Fe (∼13.8 Fe2O3 wt.%; Fe2+/total Fe = 0.58) and Mn (∼8.8 MnO wt.%) contents. A small amount of Ti is also present (∼1.3 TiO2 wt.%). Structural refinement converged to R1 = 2.96%. The unit-cell parameters are a = 8.8985(2), b = 5.7650(1), c = 10.1185(2) Å, β = 114.120(1)° and V = 473.76(2) Å3. The cation distributions determined at A1,A2 and M3 are Ca0.61Mn0.39, (La0.46Ce0.14Pr0.07Nd0.18)Σ0.85Ca0.15 and Fe2+0.56Mn2+0.30Mg0.06V3+0.05Fe3+0.03, respectively. On the other hand, depending on Ti assignment, two different schemes of the cation distribution at M1 and M2 can be considered: (1) M1(V3+0.58Fe3+0.34Ti4+0.08) M2(Al0.92Fe3+0.08), and (2) M1(V3+0.58Fe3+0.42)M2(Al0.92Ti4+0.08). In both cases, the dominant cations at A1, A2, M1, M2 and M3 are Ca, La, V3+, Al and Fe2+ , respectively. According to ionic radius, Ti4+ possibly prefers M2 rather than Fe3+. A large Mn2+ content at A1 also characterizes our vanadoallanite-(La). The structural change of Mn2+-rich allanite-group minerals is considered to be controlled by two main factors. One is the large Mn2+ content at A1 in vanadoallanite-(La), which modifies the topology of the A1O9 polyhedron. The other is the expansion of M3O6 and M1O6 octahedra caused by large octahedral cations, such as Fe2+ and Mn2+, at M3 and the trivalent transition elements, V3+ and Fe3+, at M1.

The hydroxy-sulphide yushkinite from the type deposit has been re-examined by electron probe microanalysis and reflectance measurement. The EPMA indicates minor Cu (up to 1.5 wt.%) and confirms an excess of V. Taking into account its composite structure (brucite-like hydroxide layer alternating with a berndtite-type sulphide layer) the proposed structural formula is, with the addition of minor intercalated Cu: [(Mg0.71Al0.36V0.03)Σ1.10(OH)2.18O0.02]Cu0.02 [VS2]. At the crystal scale, some crystal edges give a variable excess of Si and Al (in the 1/1 ratio), indicating a late topotactic intergrowth with a layered alumino-silicate (or a composite silicate-sulphide). New specular reflectance data are given in air and oil from 400 to 800 nm, with the polarization plane parallel or perpendicular to the elongation. The refractive index n and absorption coefficient k are given; no absorption band exists in the perpendicular position, with constant n close to 1.9, and k to 0.3. In a parallel position, a pseudo-transparency window is centred around 500–520 nm (∼2.4 eV). The main absorption band, centred around 730 nm (∼1.7 eV), corresponds probably to a transition t2g → eg related to intra-layer V-V bonding. Charge transfer from the brucite-type layer to the VS2 one, strictly controlled through H-bonding, induces a mean formal valency of V close to 3.6. Yushkinite is compared with other synthetic layered hydroxy-sulphides, as well as brucite-type intercalated compounds.

The crystal structure of kyzylkumite, ideally Ti2V3+O5 (OH), from the Sludyanka complex in South Baikal, Russia was solved and refined (including the hydrogen atom position) to an agreement index, R1, of 2.34% using X-ray diffraction data collected on a twinned crystal. Kyzylkumite crystallizes in space group P21/c, with a = 8.4787(1), b = 4.5624(1), c = 10.0330(1) Å , β = 93.174(1)º, V = 387.51(1) Å3 and Z = 4. Tivanite, TiV3+O3OH, and kyzylkumite have modular structures based on hexagonal close packing of oxygen, which are made up of rutile [TiO2] and montroseite [V3+O(OH)] slices. In tivanite the rutile:montroseite ratio is 1:1, in kyzylkumite the ratio is 2:1. The montroseite module may be replaced by the isotypic paramontroseite V4+O2 module, which produces a phase with the formula Ti2V4+O6. In the metamorphic rocks of the Sludyanka complex, vanadium can be present as V4+ and V3+ within the same mineral (e.g.in batisivite, schreyerite and berdesinskiite). Kyzylkumite has a flexible composition with respect to the M4+/M3+ ratio. The relationship between kyzylkumite and a closely related Be-bearing kyzylkumite-like mineral with an orthorhombic norbergite-type structure from Byrud mine, Norway is discussed. Both minerals have similar X-ray powder diffraction patterns.

Karpovite, ideally Tl2VO(SO4)2(H2O), was found in a fumarole of the 1st cinder cone of the North Breach of the Great Fissure Tolbachik volcano eruption (1975–1976), Kamchatka Peninsula, Russia. Karpovite occurs as bundles of white, needle-like crystals associated with shcherbinaite, pauflerite, bobjonesite, markhininite, evdokimovite and microcrystalline Mg, Al, Fe and Na sulfates. Karpovite is monoclinic, P21, a = 4.6524(4), b = 11.0757(9), c = 9.3876(7) Å , β = 98.353(2)º, V = 478.60(7) Å3, Z = 2 (from single-crystal diffraction data). The eight strongest lines of the X-ray powder diffraction pattern are (I/d/hkl): 64/4.289/012, 81/4.253/110, 38/3.683/111, 47/3.557/022, 100/3.438/21, 52/2.982/013, 59/2.945/112, 54/2.354/132. The chemical composition determined by the electron microprobe analysis is (wt.%) Tl2O 61.43, VO2 11.53, SO3 23.55, H2O 2.61, total 99.12. The empirical formula (calculated on the basis of 10 O a.p.f.u.) is Tl2.00V0.96S2.03O9(H2O). The simplified formula of karpovite is Tl2VO(SO4)2(H2O), which requires Tl2O 61.93, VO2 12.09, SO3 23.34, H2O 2.62 total 100.00 wt.%. The crystal structure was solved by direct methods and refined to R1 = 0.026 for 4196 independent observed reflections. The structure contains two symmetrically independent Tl+ sites, one V4+ site and two S6+ sites. VO5H2O octahedra and SO4 tetrahedra link together by sharing corners to form kröhnkite-type stripes parallel to the a axis with their planes oriented parallel to (021) and (02). Tl+ cations are located between the chains, linked into a three-dimensional structure. The new mineral is named in honour of Professor Gennadii Alexandrovich Karpov (b. 1938), volcanologist at the Institute of Volcanology, Russian Academy of Sciences, Petropavlovsk-Kamchatskii, Kamchatka Peninsula, Russia.