Rigid ryegrass is a problematic weed species in winter crops and winter fallow; however, recently, this weed species has been observed in summer crops and fallow. These observations warrant the evaluation of different postemergence herbicides for its control. Outdoor pot studies were conducted during the spring and summer of 2021 to 2022 to determine the performance of POST herbicides on two summer-emerging (S3 and S6) and two winter-emerging (W3 and W8) accessions of rigid ryegrass. Across all accessions, butroxydim, clethodim, paraquat, and paraquat + amitrole at the field rate provided complete control of rigid ryegrass. Both summer-emerging accessions were found to be resistant to the field rates of glufosinate (750 g ai ha−1), glyphosate (454 g ae ha−1), haloxyfop (52 g ai ha−1), and pinoxaden (30 g ai ha−1). The S6 accession had the highest dose required for a 50% reduction in biomass for these herbicides (glufosinate 1,120 g ai ha−1, glyphosate 1,210 g ae ha−1, haloxyfop 140 g ai ha−1, and pinoxaden 55 g ai ha−1). This summer-emerging accession (S6) was also resistant to iodosulfuron. All four accessions were found susceptible to imazamox + imazapyr (a commercial mixture) and mesosulfuron. The study provides the first evidence of poor control of summer-emerging accessions of rigid ryegrass with different herbicides. Multiple-herbicide-resistant summer-emerging rigid ryegrass accessions would be a challenge to the production of summer crops (e.g., cotton and sorghum) as well as winter crops that rely on weed-free summer fallows for soil moisture retention; therefore these accessions warrant diversified management strategies.

Although an increasing number of investigations have been made into the evolution of alien species once introduced, few studies have identified the invasion routes of these introduced species. Because multiple introductions are common in invasive species, failing to take into account the introduced lineages can be misleading when studying evolutionary change in alien species after they begin to extend their ranges. In Japan, diverse lineages of ryegrasses (Lolium spp.) were introduced as forage crops and contaminants in trading grain and have expanded to sandy coasts. We studied the expansion route of populations established along the coasts of three geographic regions within Japan by comparing variations in morphology and nuclear microsatellite and chloroplast DNA in the two habitats where ryegrasses were first introduced: croplands and international seaports. Chloroplast DNA haplotypes did not differ significantly among habitats and regions, but the coastal and seaport populations displayed similar microsatellite genetic compositions and morphological characteristics. Our results revealed that coastal populations originated from seaport populations derived from contaminants. Selective forces from the past, including domestication and naturalization, may have assisted the introduced lineages in colonizing new habitats.

Italian ryegrass is a major weed problem in wheat production worldwide. Field studies were conducted at Fayetteville, AR, to assess morphological characteristics of ryegrass accessions from Arkansas and differences among other Lolium spp.: Italian, rigid, poison, and perennial ryegrass. Plant height, plant growth habit, plant stem color, and node color were recorded every 2 wk until maturity. The number of tillers per plant, spikes per plant, and seeds per plant were recorded at maturity. All ryegrass accessions from Arkansas were identified as Italian ryegrass, which had erect to prostrate growth habit, green to red stem color, green to red nodes, glume (10 mm) shorter than spikelet (19 mm), and medium seed size (5 to 7 mm) with 1 to 3 mm awns. However, significant variability in morphological characteristics was found among Arkansas ryegrass accessions. When Lolium species at the seedling stage (1- to 2-wk-old plants) were compared, poison ryegrass was characterized as having a large main-stem diameter and wide droopy leaves, whereas perennial ryegrass exhibited a short and a very narrow leaf blade. These two can be distinguished from Italian and rigid ryegrass, which have leaf blades wider than perennial ryegrass but narrower than poison ryegrass. Italian and rigid ryegrass are difficult to distinguish at the seedling stage but are distinct at the reproductive stage. At maturity, Italian ryegrass and poison ryegrass seeds are awned, but perennial and rigid ryegrass seeds are awnless. Poison ryegrass awns were at least 4-fold longer than Italian ryegrass awns. Perennial ryegrass flowered 3 wk later than the other species. Poison ryegrass glumes were longer than the spikelets, whereas Italian ryegrass glumes were shorter than the spikelets. Morphological traits indicate that some Italian ryegrass populations are potentially more competitive and more fecund than others.

Glyphosate-resistance evolution in weeds is evident globally, especially in areas where transgenic glyphosate-resistant crops dominate. Resistance to glyphosate is currently known in 16 weed species, including rigid ryegrass in Australia. Following the first report of glyphosate resistance in 1998, there are now 78 documented glyphosate-resistant populations of rigid ryegrass in grain-growing regions of southern Australia. In some regions where glyphosate-resistance evolution has already occurred in rigid ryegrass, transgenic glyphosate-resistant canola was introduced in 2008, further highlighting the need to monitor glyphosate-resistance evolution in weeds. A rigid ryegrass population (WALR70) was collected in 2005 from a crop field in Esperance, Western Australia, after it had survived applications of glyphosate. Dose–response experiments confirmed resistance in the population, with the glyphosate rate resulting in 50% mortality (LD50) for WALR70 being 11 times greater than that for a susceptible biotype. The WALR70 population also had low levels of resistance to some acetyl coenzyme A carboxylase (ACCase)- and acetolactate synthase (ALS)-inhibiting herbicides (diclofop, fluazifop, clodinafop, tralkoxydim, chlorsulfuron, and imazethapyr), but was susceptible to other herbicide modes of action, such as atrazine, trifluralin, and paraquat. Two other rigid ryegrass populations assessed in this study were also confirmed to be resistant to glyphosate. The increasing number of glyphosate-resistant rigid ryegrass populations in Australia is of concern to growers because of the importance of glyphosate in intensive cropping systems and the introduction of glyphosate-resistant canola to this region.

Rigid ryegrass is the most-troublesome, herbicide-resistant weed in cropping systems of southern Australia. Field experiments were undertaken at Roseworthy, South Australia, in 2013 and 2014, to identify effective herbicide options for the control of clethodim-resistant rigid ryegrass in Clearfield canola. PPI trifluralin + triallate followed by (fb) POST imazamox + imazapyr + clethodim + butroxydim had the lowest plant density of rigid ryegrass in 2014 and provided superior control compared with the standard grower practice of PPI trifluralin + triallate fb POST imazamox + imazapyr + clethodim in 1 of 2 yr. Propyzamide either alone or as a split application (PPI fb POST) or in combination with clethodim provided similar rigid ryegrass control to that of the standard grower practice (38 to 553 plants m−2). Rigid ryegrass treated with PPI dimethenamid-P, pethoxamid, pethoxamid + triallate, and PPI trifluralin fb carbetamide POST produced significantly more seeds than the standard grower practice, which would lead to reinfestation of subsequent crops. Canola yield responded positively to effective herbicide treatments, especially in 2014, when rigid ryegrass density was greater. PPI dimethenamid-P and pethoxamid alone or in combination with triallate and propyzamide were ineffective in reducing rigid ryegrass density and seed production to levels acceptable for continuous cropping systems.

Rigid ryegrass, an important annual weed species in cropping regions of southern Australia, has evolved resistance to 11 major groups of herbicides. Dose–response studies were conducted to determine response of three clethodim-resistant populations and one clethodim-susceptible population of rigid ryegrass to three different frost treatments (−2 C). Clethodim-resistant and -susceptible plants were exposed to frost in a frost chamber from 4:00 P.M. to 8:00 A.M. for three nights before or after clethodim application and were compared with plants not exposed to frost. A reduction in the level of clethodim efficacy was observed in resistant populations when plants were exposed to frost for three nights before or after clethodim application. In the highly resistant populations, the survival percentage and LD50 were higher when plants were exposed to frost before clethodim application compared with frost after clethodim application. However, frost treatment did not influence clethodim efficacy of the susceptible population. Sequencing of the acetyl coenzyme A carboxylase (ACCase) gene of the three resistant populations identified three known mutations at positions 1781, 2041, and 2078. However, most individuals in the highly resistant populations did not contain any known mutation in ACCase, suggesting the resistance mechanism was a nontarget site. The effect of frost on clethodim efficacy in resistant plants may be an outcome of the interaction between frost and the clethodim resistance mechanism(s) present.

Herbicide resistance in rigid ryegrass is an escalating problem in grain-cropping fields of southeastern Australia due to increased reliance on herbicides as the main method for weed control. Weed surveys were conducted between 1998 and 2009 to identify the extent of herbicide-resistant rigid ryegrass across this region to dinitroaniline, and acetolactate synthase- and acetyl coenzyme A (CoA) carboxylase-inhibiting herbicides. Rigid ryegrass was collected from cropped fields chosen at random. Outdoor pot studies were conducted during the normal winter growing season for rigid ryegrass with PRE-applied trifluralin and POST-applied diclofop-methyl, chlorsulfuron, tralkoxydim, pinoxaden, and clethodim. Herbicide resistance to trifluralin in rigid ryegrass was identified in one-third of the fields surveyed from South Australia, whereas less than 5% of fields in Victoria exhibited resistance. In contrast, resistance to chlorsulfuron was detected in at least half of the cropped fields across southeastern Australia. Resistance to the cereal-selective aryloxyphenoxypropionate-inhibiting herbicides diclofop-methyl, tralkoxydim, and pinoxaden ranged between 30 and 60% in most regions, whereas in marginal cropping areas less than 12% of fields exhibited resistance. Resistance to clethodim varied between 0 and 61%. Higher levels of resistance to clethodim were identified in the more intensively cropped, higher-rainfall districts where pulse and canola crops are common. These weed surveys demonstrated that a high incidence of resistance to most tested herbicides was present in rigid ryegrass from cropped fields in southeastern Australia, which presents a major challenge for crop producers.

Two field experiments were conducted during 2012 and 2013 at Roseworthy, South Australia to identify effective herbicide options for the management of clethodim-resistant rigid ryegrass in faba bean. Dose–response experiments confirmed resistance in both field populations (B3, 2012 and E2, 2013) to clethodim and butroxydim. Sequencing of the target site of acetyl coenzyme A carboxylase gene in both populations identified an aspartate-2078-glycine mutation. Although resistance of B3 and E2 populations to clethodim was similar (16.5- and 21.4-fold more resistant than the susceptible control SLR4), the B3 population was much more resistant to butroxydim (7.13-fold) than E2 (2.24-fold). Addition of butroxydim to clethodim reduced rigid ryegrass plant density 60 to 80% and seed production 71 to 88% compared with the standard grower practice of simazine PPI plus clethodim POST. Clethodim + butroxydim combination had the highest grain yield of faba bean (980 to 2,400 kg ha−1). Although propyzamide and pyroxasulfone plus triallate PPI provided the next highest levels of rigid ryegrass control (< 60%), these treatments were more variable and unable to reduce seed production (6,354 to 13,570 seeds m−2) to levels acceptable for continuous cropping systems.

Preventing the introduction of weeds into the farming system through sowing of clean seeds is an essential component of weed management. The weed seed contamination of cleaned grain and herbicide resistance levels of the recovered weed seeds were examined in a study conducted across 74 farms in the Western Australian grainbelt. Most farmers grew and conserved their own crop seed. The majority of cleaned samples had some level of seed contamination from 11 foreign weed and volunteer crop species, with an average of 62 seeds 10 kg−1 grain, substantially higher than the 28 seeds 10 kg−1 grain expected by farmers. The most common weed contaminants across all samples were rigid ryegrass, wild radish, brome, and wild oat. When categorized by crop type, rigid ryegrass was the most frequent contaminant of cereal crops (barley and wheat), however wild radish was the most frequent contaminant of lupin crops. Uncleaned crop seed samples had almost 25 times more contamination than cleaned crop seed. Herbicide resistance was highly prevalent within rigid ryegrass populations recovered from cleaned grain except for glyphosate, which controlled all populations tested. Some resistance was also found in wild radish and wild oat populations; however, brome was susceptible to fluazifop. This study has shown that farmers are unknowingly introducing weed seeds into their farming systems during crop seeding, many of which have herbicide resistance.

Field surveys were conducted on 319 sites of the Western Australian grain belt in 2006 to determine the occurrence and distribution of summer fallow weed species. Sites were located across five growing season regions (north, north central, central, south central, and south) and three annual rainfall zones (high, medium, and low). A total of 51 species (or species groups) from 18 families were identified, with the large majority of species (35%) belonging to the Poaceae family. The most prevalent species found, being present at more than 10% of all sites, were wheat, “melons” (weedy watermelon and paddymelon), rigid ryegrass, capeweed, clover, mintweed, wild radish, fleabane, windmill grass, and rolypoly. Correspondence analysis revealed that the north, central, and southern regions of the grain belt could be predominately segregated according to dominant weed species occurrence; however, no segregation by rainfall zone was apparent. This study has given an overview of summer fallow weed occurrence in the Western Australian grain belt and highlights those weed species that are common and yet lack sufficient research into their ecology and management.

PRE herbicides are generally less effective in conservation farming systems because of high levels of crop residue. However, performance can be improved if the herbicides are applied with a high carrier volume. This research investigated the interaction of carrier volume and row spacing or height of crop residue on the control of rigid ryegrass with trifluralin, at Cunderdin and Wongan Hills Western Australia. To create plots with varying residue row spacing in 2011, wheat was seeded in 2010 using a narrow row spacing (25 or 22 cm at Cunderdin and Wongan Hills), wide spacing (50 or 44 cm), or not planted to wheat. Narrow or wide row spacing or no crop plots had an average residue biomass of 4480, 3560, and 2430 kg ha−1 at Cunderdin and 1690, 1910, and 1030 kg ha−1 at Wongan Hills. To vary residue height, the wheat was harvested to produce tall, medium, or short crop residue (22, 13, and 5 cm at Cunderdin and 27, 22, and 17 cm at Wongan Hills). Rigid ryegrass seeds were broadcast onto each site in 2011 and trifluralin was sprayed using 50, 75, or 100 L ha−1 carrier volume (directly prior to seeding). Increased carrier volume increased spray coverage at both sites (average cover of 9, 15, and 26% at 50, 75, and 100 L ha−1), leading to improved control of rigid ryegrass (68, 75, and 82% control at Cunderdin and 23, 41, and 68% control at Wongan Hills). Reduced crop residue height or increased row spacing led to reduced rigid ryegrass density at Cunderdin but had no impact at Wongan Hills. Therefore, carrier volume has a more consistent impact on the performance of trifluralin than crop residue row spacing or height.