Yakushima is a small, mountainous island off southern Kyushu, Japan. Its proximity to active volcanos and subduction zones leaves Yakushima vulnerable to large megathrust earthquakes and tsunamis, in addition to powerful typhoons and storm surges. These hazardous events deposit beach boulders: large rocks moved above sea-level by powerful waves. By radiocarbon dating the fossilized coral within these boulders, one can derive age estimates of the hazard events. Reliably estimating the magnitude and timing of geological events in the historical record is vital for future hazard prediction and mitigation. In this study, we estimated the deposition age of ten boulders on the north coast of Yakushima to infer potential paleo tsunamis and storm surges. We found that large wave events have occurred frequently throughout the Holocene. Based on the boulders’ ages, we identified four potential deposition events at 1986–2692 cal yr BP, 3522–4075 cal yr BP, 4773–5232 cal yr BP, and 6187–6638 cal yr BP. These deposits are likely a result of storm surges, or tsunamis from nearby volcanic activity or subduction earthquakes. Another set of boulders dated to 5125–5738 cal yr BP were likely exposed due to a decline in sea-level following the Holocene high sea-level stand. Further modelling could determine the wave height necessary to move the boulders and distinguish between storm and tsunami deposits. This is especially pertinent given the high frequency of coastal geohazards, and the likelihood of similar hazards impacting southeast Japan in the future.

Mollusk shells are often found in archeological sites, given their great preservation potential and high value as a multipurpose resource, and they can often be the only available materials useful for radiocarbon (14C) dating. However, dates obtained from shells are often regarded as less reliable compared to those from bones, wood, or charcoals due to different factors (e.g., Isotope fractionation, reservoir effects etc.). The standard acid etching pretreatment for mollusk shells is the most used in many 14C laboratories, although another protocol known as CarDS (Carbonate Density Separation) was introduced just over a decade ago. We compare these two methods with two newly proposed methods for intracellular organic matrix extraction. We applied all four methods to samples selected from different archeological layers of the well-known Upper Paleolithic site of Vale Boi, rich in mollusk specimens throughout the stratigraphic sequence. Here we compare our results to previous dates to determine which of these pretreatment methods results in the most reliable 14C dates. Based on the results of this study, all four methods gave inconsistent ages compared to previous dates and the stratigraphic attribution.

The shift towards cultivating domesticated crops was a pivotal development in ecological, economic, and human behavioural systems. As agriculture expanded beyond its origins, it faced diverse environments, often unsuitable for the originally cultivated domesticates. Farmers in Central Europe had to adjust and transform their farming systems, typically cultivating only five domesticated crop species. Here, we present new archaeobotanical data comprising 7955 determined charred remains and 22 radiocarbon dates from South Bohemia. This region, with higher altitudes, colder climates, and less fertile soils, lies on the periphery of Early Neolithic settlement. Our results reveal increased crop diversity as a form of adaptation to the harsher environment that bolstered resilience against crop failure. The earliest 14C-based evidence of deliberate cultivation of barley and Timopheev’s wheat in the region also provides new insights into the interplay between crop diffusion, landscapes, and food choices in the Neolithic Central Europe.

The automatic graphitization system (AGE3) by IonPlus is very popular among radiocarbon dating laboratories. Usually, solid samples are burnt in an elemental analyzer (EA), and the gaseous CO2 is transferred for graphitization. Our system is coupled also with an isotope ratio mass spectrometer (IRMS), which measures the δ13C and δ15N of that gas. Some less routine pretreatment protocols require the production of gaseous samples and prevent the possibility of using the EA-AGE3 system, as the EA is used for solid samples only. In order to use that system, including the measurements of stable isotopes, we developed a glass tube cracker that connects to the EA. The device is routinely used in our laboratory and is mainly built from Swaglok catalog parts. We show that the background (blank) levels of a marble standard are indistinguishable between using the cracker and burning solid marble using the EA. We further demonstrate that the δ13C values are consistent and that the extraction efficiency when using the device is above 93%. Full descriptions, drawings, and working protocol are supplied.

The floating dendrochronological sequence of pine wood from Józefowo, N. Poland was expected to cover the ∼660 BC radiocarbon (14C) excursion. The sequence was radiocarbon dated using the OxCal wiggle matching procedure and the IntCal20 calibration curve. 14C concentrations were measured in one-year α-cellulose samples from around 660 BC. The published data on the ∼660 BC 14C excursion from Grabie, Poland were used to absolute date the Józefowo chronology with 1-year accuracy. The results confirm the occurrence of a rapid increase in Δ14C in 664/663 BC and its potential to be used as a fixing point for floating dendrochronological sequences.

The AMS Golden Valley radiocarbon analysis laboratory is equipped with two accelerator mass spectrometers: AMS facility from Budker Institute of Nuclear Physics (BINP AMS) and MIni CArbon DAting System (MICADAS-28) from Ionplus AG and two graphitization systems: Automated Graphitization Equipment (AGE-3) from Ionplus AG and Absorption-catalytic setup developed in Boreskov Institute of Catalysis (ACS BIC). The laboratory provides routine 14C analyses of various samples: collagen, cellulose, humic acids, carbonates from sediments, etc. The main focus of the laboratory is to determine the age of archaeological artifacts by radiocarbon dating. This work presents a comprehensive description of the BINP AMS facility, with its operation compared with that of MICADAS in the same laboratory. In 2022, the AMS Golden Valley laboratory participated for the first time in the Glasgow International Radiocarbon Inter-comparison (GIRI). The samples were graphitized on the AGE-3 and subsequently measured in both AMS facilities. A comparison of the results of the two series of experiments, namely AGE-3 + MICADAS-28 and AGE-3 + BINP AMS, is given.

At the Intertropical Convergence Zone (ITCZ), the northern and southern Tradewinds converge, and this region is characterized by low atmospheric pressure and high precipitation. The climate in the Timor Sea is characterized by seasonal precipitation changes driven by meridional migrations of the ITCZ and the monsoonal front. The ITCZ shifts in response to changes in the thermal balance between the northern and southern hemispheres. Thus, reconstruction of paleo-precipitation in the Timor Sea is expected to reveal past changes in both regional and global climate, the latter through inference of the ITCZ position. To reconstruct paleo-precipitation in the Timor Sea, we performed extensive radiocarbon analysis on both planktonic foraminifera and total organic carbon (TOC), which is derived from terrestrial and marine sources. Increased precipitation enhances the fraction of relatively old, terrestrial carbon to the core site, which in turn increases the difference between the ages of TOC and planktonic foraminifera. Variations in radiocarbon ages reveal that during northern hemisphere cooling intervals such as Heinrich Stadial 1 and the Younger Dryas, the ITCZ was in a southern position, thus increasing precipitation in the Timor Sea. However, the Timor Sea was dryer during the Bølling–Allerød warming as the ITCZ shifted northward.

Accurate radiocarbon (14C) analysis depends on a successful carbon separation relevant to the studied object. The process of 14C dating involves the following steps: characterization and sample choice, sample treatment, measurements, and evaluation of the results. Here, we provide an overview of conventional approaches to macromolecular samples and address specific issues such as detecting and removing contamination with roots, dolomite, and conservation products. We discuss the application of elemental analysis (%N, %C) in the preparation of bones and the infrared analysis in monitoring the contamination of samples. Our observations provide the basis for the discussions of the existing results and for planning the future sampling.

For several decades, many efforts have been dedicated to enhancing the accuracy of mortar radiocarbon dating and evaluating the reliability of the results concerning the typology of the examined specimens. Several assumptions that are fundamental for the application of the method may be in many cases not fulfilled, such as (a) complete primary limestone dissociation during calcination, (b) efficient separation of geogenic carbon contained in calcareous aggregates, (c) short carbonation time, and (d) absence of secondary calcite. Many laboratories all over the world have proposed different methods to select suitable fractions of mortar.

The first intercomparison attempt, involving eight international laboratories, was organized in 2016 aiming at comparing and statistically treating the results obtained on the same materials by different laboratories with their own characterization and pre-treatment methods (Hajdas et al. 2017; Hayen et al. 2017). Following this first step, a new intercomparison experiment was proposed and set up in 2018 during the Mortar Dating International Meeting (Bordeaux, FR). A new set of three mortar samples was chosen, taking care of the selection of standardized materials (homogeneity, known mineralogical composition, absence of exogenous inclusions, known expected age).

This work describes the results of two research teams involved in the intercomparison. The samples were characterized, selected, and dated depending on each laboratory strategy. The results stress the importance of the characterization of the raw material is to better understand the mineralogical and petrographical composition of the samples. Such information can support the choice of the most appropriate strategy for the extraction of CO2 and then for data interpretation.

Radiocarbon (14C) dating of sediment deposition around Antarctica is often challenging due to heterogeneity in sources and ages of organic carbon in the sediment. Chemical and thermochemical techniques have been used to separate organic carbon when microfossils are not present. These techniques generally improve on bulk sediment dates, but they necessitate assumptions about the age spectra of specific molecules or compound classes and about the chemical heterogeneity of thermochemical separations. To address this, the Rafter Radiocarbon Laboratory has established parallel ramped pyrolysis oxidation (RPO) and ramped pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) systems to thermochemically separate distinct carbon fractions, diagnose the chemical composition of each fraction, and target suitable RPO fractions for radiocarbon dating. Three case studies of sediment taken from locations around Antarctica are presented to demonstrate the implementation of combined RPO-AMS and Py-GC-MS to provide more robust age determination in detrital sediment stratigraphy. These three depositional environments are good examples of analytical and interpretive challenges related to oceanographic conditions, carbon sources, and other factors. Using parallel RPO-AMS and Py-GC-MS analyses, we reduce the number of radiocarbon measurements required, minimize run times, provide context for unexpected 14C ages, and better support interpretations of radiocarbon measurements in the context of environmental reconstruction.

This paper offers a temporal analysis of the megalithic group of La Lora in the context of northern Iberian Plateau megalithism. For this purpose, 67 accelerator mass spectrometry radiocarbon (AMS 14C) dates were obtained on human bone from the minimum number of individuals recovered from nine tombs. This is the first systematic dating project carried out in this dolmen group and has enabled the chronology of the main funerary series to be updated. The results reveal that the actual funerary use dates mainly to the 4th millennium BC, although, as deduced from the archaeological material, some tombs were reused in later periods. Additionally, the significant architectural polymorphism of the group, consisting mainly of simple dolmens and large corridor tombs, suggested a temporal evolution to monumentality. However, the dating shows a more complex reality, since it is likely that the large tombs functioned as funerary pantheons during the 4th millennium BC, characterized by a cyclical and recurrent use. In contrast, the simpler structures were preferred to be of shorter use and restricted to the first half of the 4th millennium.

The absolute dating of mortar by accelerator mass spectrometry (AMS) has been the subject of renewed interest for several years. International intercomparison campaigns, called MODIS (MOrtar Dating Intercomparison Study), have been carried out. The first MODIS-1 campaign highlighted limitations in mortar dating, due to the similarity between the primary material to be dated (binder) and the contaminant (exogenous CaCO3). Methods have since emerged to overcome this problem and the need for a good preliminary characterization has been proven. The Laboratoire de Mesure du Carbone 14 (LMC14) took part in the second intercomparison campaign, MODIS2, by applying thermal decomposition increments to distinguish the carbonated binder, the organic matter contaminants (late in formation pyrogenic carbonate, LDH) and limestone. The LMC14 results on MODIS2 are quite conclusive on “pure” re-carbonated lime mortar binders containing little contaminant geological limestone but show their weaknesses for mortars heavily contaminated in Dolomites, which are difficult to discern from the binder. Recommendations for users of radiocarbon (14C) dating on mortar-based materials are made in the conclusion.

Analysis of the chronological data and observation of a lagoonal sediment core reveal sand washover events between around 2.4 to 2.5 cal. ky BP in the Isumi River lowland. We conducted radiocarbon dating with AMS and constructed an age-depth model using the latest calibration curve and appropriate model routine. In the middle to lower part of the core, dark-gray sand layers are repeatedly deposited. Sand layers may exhibit an erosional surface at the base with fining upward grading. The overwash layers are composed of well-rounded sand with occasional gravel, indicative of transportation. overwash sediment characteristics are consistent with proximal marine deposits, suggesting an ocean origin (though riverine sediment is also similar in character). The age-depth model indicates very high sediment accumulation rates associated with overwash deposits. Based on the amount of accumulated sediment, relatively large-scale redeposition events occurred during this period but more information is needed to constrain the mechanism(s) causing the events. We also present a local reservoir age correction compatible with the Marine20 calibration curve.

A newly developed compact AMS, LEA (Low Energy Accelerator), is tested and compared with a state-of-the-art AMS system MICADAS (Mini Carbon Dating System), which has a precision performance of better than 1‰ for modern 14C. The main difference between these two systems is the acceleration voltage, which has been reduced from 200 kV with the MICADAS system to 50 kV with the LEA system. In order to execute the final performance tests, exactly same samples (2 sets consisting of 7 standards, 4 blanks, 26 wood samples) are measured on both systems successively. The results show that the LEA system is fully operational, and the performance is entirely comparable with that of the MICADAS system.

Known as lead white, lead carbonates were used as white pigment or cosmetics from the 4th century BC to the 20th century AD. Lead white was produced by the corrosion of metallic lead by vinegar and horse manure up to the 19th c. In order to document the incorporation of carbon in the corrosion mechanism, lead carbonates were produced in the laboratory under monitored experimental conditions using materials with different isotope signatures in 14C and 13C. Six experimental setups were defined combining vinegar, acetic acid, horse manure and fossil CO2 gas. The corrosion products were characterized by X-ray diffraction. 14C content and δ13C values of the initial reactants and the final products were measured by accelerator and isotopic ratio mass spectrometry (AMS and IRSM). The reaction between lead and vinegar or acetic acid resulted in lead acetates with a carbon isotopic signature close to that of the corrosive reagent. In the presence of CO2, the carbonatation reaction occurred and the cerussite produced had a predominant 14C signature of the carbon dioxide source. These experiments demonstrate that the CO2 produced by horse manure fermentation is incorporated into the corrosion products, allowing the absolute dating of lead white by the radiocarbon method.

Atmospheric CO2 samples have been collected by the Trondheim Radiocarbon Laboratory since the 1960s. The remaining material from the measurements has been precipitated as CaCO3 and stored in glass containers. We investigated some of the stored samples to assess whether the material could still be used for remeasurements of atmospheric radiocarbon (14C) content, or if it has been contaminated during the years of storage. We attempted different methods to clean the carbonate and release the CO2 for new measurements. The results indicate that the older samples before 1970 show a significant change in 14C content compared to the original measurements, and that our cleaning methods have only little effect. Later samples from the 1970s, which were archived in glass containers with a different lid, show a lower contamination that, however, still leads to an added uncertainty of several pMC and makes these samples unreliable.

Dating organic inclusions in mortars such as charcoals is a useful alternative or complementary method to dating mortars themselves, helping to estimate the building age. To assess the limitations of this dating approach, organic inclusions were searched for in surface mortar layers of six early to late medieval buildings in the Czech Republic with relatively well-known age. Altogether, 123 samples were found. About 80% were successfully radiocarbon (14C) dated. However, only 66% originated from wood relatively young when used in lime burning. To judge which samples are relevant to the actual building date, sufficient statistics is crucial. We recommend dating at least 5–10 samples, i.e., collecting 6–12 samples, for a site with uncomplicated building history, or per building phase. Otherwise, unrealistically old or young dates might be obtained. With the recommended statistics, inclusion-based dating provides building ages with uncertainty of 50–100 years.

In 2001, five French public organizations (CNRS, CEA, IRD, IRSN, and the Ministère de la Culture) signed an agreement to purchase a new accelerator mass spectrometer to provide radiocarbon dating services at the national level. The Laboratoire de Mesure du Carbone 14 (LMC14) was set up in Saclay (France) around ARTEMIS, an AMS system based on a 3MV Pelletron from NEC and installed in early 2003. In 2015, the LMC14 joined the Laboratoire des Sciences du Climat et de l’Environnement, making it possible to develop research projects in addition to the service activity and since 2021, the LMC14 has been a member of the IAEA Collaborating Centre “Atoms for Heritage” at the Université Paris-Saclay. Since 2003, 70,000 samples have been measured. Two-thirds of the samples have been prepared on site and one-third in two associated laboratories in Paris and Lyon. Over the past years, the LMC14 has participated in several international inter-comparisons and has continuously improved its capabilities by developing new protocols for preparation and measurement. In this paper, the radiocarbon dating services of the last 20 years for research institutions, museums and environmental monitoring are reviewed and recent results from environmental and archaeological research programs are highlighted.

Absolute dating of plasters and mortars clearly represents a key information to study important structures and buildings that may have undergone a difficult story starting from their construction. This is for instance the case of the architectures in the archaeological site of Hierapolis (Denizli, Turkey). However, when discussing about the possibility to apply radiocarbon (14C) dating, in this site the presence of different sources of contaminants, due to the geological and geochemical conditions and to the used raw materials, prevents the binder dating. As an alternative, we thus decided to focus on the small fragments of straw that had been used as additives in the mortar/plaster matrices. The fragments were identified, selected and dated using a 14C experimental set-up specifically optimized for microgram-sized samples. The obtained results were satisfying, even though the measured 14C ages also pointed out some possible criticalities in dating such small samples collected from a carbonaceous matrix.

Rýzmburk Castle is one of the largest and most important medieval castles in Bohemia, documented since 1250 AD. Its North tower is assumed to be built in 1260–1300 AD. To test this assumption, the surface layers of mortar were inspected for the presence of charcoals suitable for radiocarbon dating, and 10 charcoals were found. The charcoals probably originated from wood used for lime burning. The results of radiocarbon dating using accelerator mass spectrometry agree with the historical estimation. Single post-1287 sample indicates that the building date might be refined to 1287–1300 AD.