Er:CaF2 crystals are crucial gain media for producing 3 μm mid-infrared (MIR) lasers pumped by 976 nm continuous-wave (CW) lasers owing to their low phonon energy and high conversion efficiency. This study investigated the damage characteristics and mechanism of Er:CaF2 crystals irradiated with a 976 nm CW laser. The laser-induced damage threshold of Er:CaF2 crystals with different Er3+ doping levels was tested; the damage morphology consists of a series of regular 70° cracks related to the angle of the crystal slip system on the surface. A finite-element model was used to calculate the temperature and stress fields of the crystals. The results indicated that the damage can be attributed to surface tensile stresses caused by the temperature gradient, and crystals with higher doping concentrations were more susceptible to damage owing to stronger light absorption. These findings provide valuable insights into the development of high-power MIR lasers.

The Permian–Triassic climate crisis can provide key insights into the potential impact of horizon threats to modern-day biodiversity. This crisis coincides with the same extensive environmental changes that threaten modern marine ecosystems (i.e., thermal stress, deoxygenation and ocean acidification), but the primary drivers of extinction are currently unknown. To understand which factors caused extinctions, we conducted a data analysis to quantify the relationship (anomalies, state-shifts and trends) between geochemical proxies and the fossil record at the most intensively studied locality for this event, the Meishan section, China. We found that δ18Oapatite (paleotemperature proxy) and δ114/110Cd (primary productivity proxy) best explain changes in species diversity and species composition in Meishan’s paleoequatorial setting. These findings suggest that the physiological stresses induced by ocean warming and nutrient availability played a predominant role in driving equatorial marine extinctions during the Permian–Triassic event. This research enhances our understanding of the interplay between environmental changes and extinction dynamics during a past climate crisis, presenting an outlook for extinction threats in the worst-case “Shared Socioeconomic Pathways (SSP5–8.5)” scenario.

The success of agriculture relies on healthy bees to pollinate crops. Commercially managed pollinators are often kept under temperature-controlled conditions to better control development and optimize field performance. One such pollinator, the alfalfa leafcutting bee, Megachile rotundata, is the most widely used solitary bee in agriculture. Problematically, very little is known about the thermal physiology of M. rotundata or the consequences of artificial thermal regimes used in commercial management practices. Therefore, we took a broad look at the thermal performance of M. rotundata across development and the effects of commonly used commercial thermal regimes on adult bee physiology. After the termination of diapause, we hypothesized thermal sensitivity would vary across pupal metamorphosis. Our data show that bees in the post-diapause quiescent stage were more tolerant of low temperatures compared to bees in active development. We found that commercial practices applied during development decrease the likelihood of a bee recovering from another bout of thermal stress in adulthood, thereby decreasing their resilience. Lastly, commercial regimes applied during development affected the number of days to adult emergence, but the time of day that adults emerged was unaffected. Our data demonstrate the complex interactions between bee development and thermal regimes used in management. This knowledge can help improve the commercial management of these bees by optimizing the thermal regimes used and the timing of their application to alleviate negative downstream effects on adult performance.

The aims of this study were to determine the effects of long distance transport on shrink and mortality rate in cattle, and to understand the relationships between environmental temperature, bodyweight, shrink and dressing percentage. This survey was conducted on 121 transfers of bulls (Bos taurus) from commercial finishing units in Bugyi, Hungary to a public slaughterhouse in Ankara, Turkey between July and December 2010. A total of 3,874 bulls were transported and the journeys took approximately 30 h, including a 2-h rest period with water and feed available. In order to investigate the effect of thermal stress, the deviation of the average monthly ambient temperature from average six-monthly temperature was determined (d-value). Weight loss during transport and dressing percentage were determined monthly. The effect of month on shrink during transport was significant and average transport shrink was 5.57% during the six months. In general, the highest shrink rate was observed in the summer (August: 8.39%) and winter months (December: 7.27%), both of which are outside the thermoneutral zone for beef cattle. The lowest shrink rate was observed in the autumn months (October: 2.99%, November: 1.77%), which is within the thermoneutral zone. The mortality rate was 0.464% during transportations. Mortality rate was high but the effect of month on mortality rate was not significant. There was a moderate positive correlation between transport shrink and d-value. In conclusion, transportations within thermal comfort zone range and good quality animal handling are recommended in order to prevent the adverse effects of long distance transportation, such as shrink and mortality.

Gene expression variation can be partitioned into different components (regulatory, genetic and acclimatory effects) but for lichen-forming fungi, the relative importance of each of these effects is unclear. Here, we studied gene expression in the lichen-forming fungus Lobaria pulmonaria in response to thermal stress and parasitism by the lichenicolous fungus Plectocarpon lichenum. Our experimental procedure was to acclimate lichen thalli to 4 °C over three weeks and then expose them to 15 °C and 25 °C for 2 hours each, sampling infected and visually asymptomatic thalli at each temperature. Quantitative Real-Time PCR was utilized to quantify gene expression of six candidate genes, normalizing expression values with two reference genes. We found that two genes encoding heat shock proteins (hsp88 and hsp98), two polyketide synthase genes (rPKS1, nrPKS3) and elongation factor 1-1-α (efa) were upregulated at higher temperatures. Moreover, we observed higher expression of hsp98 at 25 °C in samples infected by P. lichenum than in uninfected samples. Finally, in partial redundancy analyses, most of the explained variation in gene expression was related to temperature treatment; genetic variation and long-term acclimatization to sites contributed far less. Hence, regulatory effects (i.e. direct adjustments of gene expression in response to the temperature change) dominated over genetic and acclimatory effects in the gene expression variability of L. pulmonaria. This study suggests that L. pulmonaria could become a valuable lichen model for studying heat shock protein responses in vivo.

Global human activities, such as greenhouse emissions and pollution, are promoting global warming, environmental changes and biodiversity reduction. Pristine environments such as those of Antarctica are not immune to these phenomena, as is noticeable from the increasing pace of the temperature shift registered within the continent in recent decades. In this study, we describe the first de novo transcriptome analysis of the endemic Antarctic springtail (= collembolan) Cryptopygus terranovus and we evaluate its global gene expression response following a mid-term exposure of 20 days to 18°C. Expression data are compared with wild specimens sampled from their native environment to outline the molecular mechanisms triggered by the thermal exposure. Although individual plasticity in transcript modulation is assessed, several pathways appear to be differentially modulated in springtails subjected to the heat treatment vs wild specimens. Through enrichment analysis, we show that protein catabolism, fatty acid metabolism and a sexual response characterized by spermatid development are induced, while carbohydrate consumption, lipid catabolism and tissue development are downregulated in treated samples compared to controls.

Fluorescent proteins (FPs) are reported to play an important role as photoprotectants and antioxidants in corals subjected to stressful conditions. Identifying the various FP genes expressed and FP gene expression patterns under stress in diverse coral species can provide insight into FP function. In this study, we identified 16 putative FP homologues from the transcriptomes of corals with varying susceptibility to elevated temperature, including Acropora digitifera, Favites colemani, Montipora digitata and Seriatopora caliendrum. Each coral expressed a different complement of FP transcripts, which were predicted to have distinct spectral properties. The most diverse and abundant repertoire of FP transcripts, including at least 6 green FPs, were expressed in the temperature-tolerant coral, F. colemani. In comparison, the other corals expressed fewer FP types. Specific FP transcripts exhibited variable expression profiles in coral fragments subjected to 32 ± 1 °C (treatment) or 28 ± 1 °C (control) for up to 72 h, suggesting that distinct FPs may have different roles. Further studies on the expression of the proteins encoded by these FP transcripts, their fluorescence activity, tissue localization, and possible antioxidant properties, are needed to reveal their contribution to thermal stress tolerance in certain species of corals.

Remarkable increases in the production of dairy animals have negatively impacted their tolerance to heat stress (HS). The evaluation of the effect of HS on milk yield is based on the direct impact of HS on performance. However, in practical terms, HS also exerts its influence during gestation (indirect effect). The main purpose of this study was to identify and characterize the genotype by environment interaction (G × E) due to HS during the last 60 days of gestation (THI_g) and also the HS postpartum (THI_m) over first lactation milk production of Brazilian Holstein cattle. A total of 389 127 test day milk yield (TD) records from 1572 first lactation Holstein cows born in Brazil (daughters of 1248 dams and 70 sires) and the corresponding temperature–humidity index (THI) obtained between December 2007 and January 2013 were analyzed using different random regression models. Cows in the cold environment (THI_g = 64 to 73) during the last 60 days of gestation produced more milk than those cows in a hot environment (THI_g = 74 to 84), particularly during the first 150 days of lactation (DIM). The heritabilities (h2) of TD were similar throughout DIM for cows in THI_g hot (0.11 to 0.20) or (0.10 to 0.22), while the genetic correlations (rg) for TD between these two environments ranged from 0.11 to 0.52 along the first 250 DIM. The h2 estimates for TD across THI_m were similar for cows in THI_g hot (0.07 to 0.25) and THI_g cold (0.08 to 0.19). The rg estimates ranged from 0.17 to 0.42 along THI_m between TD of cows in cold and hot THI_g. The results were consistent in demonstrating the existence of an additional source of G × E for TD due to THI_g and THI_m. The present study is probably the first to provide evidence of this source of G × E; further research is needed because of its importance when the breeding objective is to select animals that are more tolerant to HS.

In this study, cast tungsten carbide particle/steel matrix surface composites were fabricated using a vacuum evaporative pattern casting (V-EPC) infiltration process. Through thermal shock tests at 500 °C, the initiation and propagation of cracks at the interface of the composites were investigated. Owing to the mismatch in the coefficients of thermal expansion (CTE), cracks tended to appear at the interface reaction zone (IRZ) between the particles and the matrix. Because there was also a difference in the CTE between the composite and the substrate, the cracks propagated rapidly along the transition layer (TL) between the composite and the substrate, and finally connected to form macro-cracks. Based on the stress analysis and calculation, the maximum thermal stress at the TL was 63.4 MPa, while the maximum thermal stress at the IRZ was 38 MPa. It could thus be inferred that the TL is the weak link under thermal fatigue. In addition, the experimental results were verified and found to be in good agreement with the calculations.

With international demand for production systems aimed at thermal comfort and animal welfare, milk producers have become increasingly interested in compost barns. However, doubts about the behavioral aspects of cows in tropical and subtropical climates remain, because the compost barn system offers a larger bed area per animal at a lower stocking rate. The objective of this study was to evaluate whether the diurnal behaviors, hygiene and lameness of crossbred dairy cows are influenced by different number of lactations when housed in a compost-bedded pack barn system under hot and humid conditions. Crossbred cows (Holstein and Jersey), which were divided into two treatments based on number of lactations (primiparous and multiparous cows), were evaluated during lactation (n=12). The study was conducted from September 2015 to February 2016 in a compost barn in the southwest region of the state of Paraná, Brazil. Daytime behavior was observed between milking schedules using focal observations with 0/1 sampling. Cow hygiene and lameness were evaluated using subjective scores ranging from 1 to 4 and 1 to 5, respectively. Animal behavior and welfare was analyzed using Bayesian inference with a mixed effects model. The probabilities of dyspnea and pushing behaviors were higher (P<0.05) in multiparous cows, and the probability increased during the hottest hours of the day. For both multiparous and primiparous cows, the agonistic behaviors of pushing, butting and chasing peaked during the afternoon. Eating behaviors had the highest likelihood values (0.8 at 0800 h). The cows preferred to remain lying down in the morning, while rest and standing rumination were preferred in the afternoon. Primiparous cows were cleaner than multiparous cows, and the hygiene score for this group was significantly lower (P<0.05). The hygiene and lameness scores for all animals were low, and the highest scores were 1 and 2. In conclusion, multiparous cows exhibited more frequent agonistic behaviors during the hottest hours of the day. Regarding hygiene and lameness scores, multiparous cows exhibited a higher degree of dirtiness compared with the primiparous cows.

Heat shock proteins (HSPs) participate in diverse physiological processes in insects, and HSP70 is one of the most highly conserved proteins in the HSP family. In this study, full-length cDNAs of three HSP70 genes (Lthsc70, Lthsp701, and Lthsp702) were cloned and characterized from Liriomyza trifolii, an important invasive pest of vegetable crops and horticultural crops worldwide. These three HSP70s exhibited signature sequences and motifs that are typical of the HSP70 family. The expression patterns of the three Lthsp70s during temperature stress and in different insect development stages were studied by real-time quantitative PCR. Lthsp701 was strongly induced by high- and low-temperature stress, but Lthsc70 and Lthsp702 were not very sensitive to temperature changes. All three Lthsp70s were expressed during insect development stages, but the expression patterns were quite different. The expression of Lthsc70 and Lthsp702 showed significant differences in expression during leafminer development; Lthsc70 was most highly expressed in female adults, whereas Lthsp702 was abundantly expressed in larvae and prepupae. Lthsp701 expression was not significantly different among leafminer stages. These results suggest that functional differentiation within the LtHSP70 subfamily has occurred in response to thermal stress and insect development.

The oriental army worm Mythimna separata (Lepidoptera: Noctuidae) is a migratory pest in Eastern Asia and China. Seasonal high temperatures in Southern China and low temperatures in Northern China are pressures favouring the annual migration of this species, while cold tolerance determines the northern limit of its overwintering range. A number of physiological stress responses occur in insects as a result of variations in temperature. One reaction to thermal stress is the generation of reactive oxygen species (ROS), which can be harmful by causing oxidative damage. The time-related effects (durations of 1, 4 and 7 h) of thermal stress treatments of M. separata at comparatively low (5, 10, 15 and 20°C) and high (30, 35, 40 and 45°C) temperatures on the activities of antioxidant enzymes, including superoxide dismutase (SOD), catalase (CAT), peroxidase (POX) and glutathione S-transferases (GSTs), and total antioxidant capacity (T-AOC) were determined. Thermal stress resulted in significant elevation of the activities of SOD, CAT and GSTs, indicating that these enzymes contribute to defence mechanisms counteracting oxidative damage caused by an increase in ROS. However, at high-temperatures, POX and T-AOC were also found to contribute to scavenging ROS. Our results also indicate that extreme temperatures lead to elevated ROS production in M. separata. The present study confirms that thermal stress can be responsible for oxidative damage. To overcome such stress, antioxidant enzymes play key roles in diminishing oxidative damage in M. separata.

Through silicon via (TSV) is the critical structure for three dimensional (3D) integration, which provides vertical interconnection between stacking dies. In TSV structure, large coefficient differences of thermal expansion exist between silicon substrate, dielectric material, and filled metal. Due to the large thermal mismatch, the high thermal stress occurring at the interface of different materials would result in delamination. Therefore, thermal-mechanical reliability is a key issue for 3D integration. In this study, we investigated the thermal-mechanical stress distribution of TSV under the condition of the accelerated thermal cycling loading by finite element analysis based on a 3D model of TSV structure. Due to the thermal expansion, that the TSV structure squeezed the surface area between TSVs at a high temperature resulted in compressive stresses at the surface area between TSVs. Therefore, a proper distance between the stress-sensitive device and the TSV should be kept. The stress analysis shows that the maximum thermal stress occurs in the outside region of TSV interface and in the annular region of TSV at a high temperature and at a low temperature, respectively. This study helps to obtain a clear thermal stress distribution of TSV and possible failure regions can be determined.

Immunity of parasites has been studied amazingly little, in spite of the fact that parasitic organisms, especially the arthropod parasites, need immunity to survive their own infections to successfully complete life cycles. Long-term effects of challenging environmental temperatures on immunity have remained unstudied in insects and parasites. Our study species, the deer ked (Lipoptena cervi; Linnaeus 1758), is an invasive, blood-feeding parasitic fly of cervids. Here, it was studied whether thermal stress during the pupal diapause stage could modify adult immunity (encapsulation capacity) in L. cervi. The effect of either a low temperature or high temperature peak, experienced during winter dormancy, on encapsulation response of active adult was tested. It was found that low temperature exposure during diapause, as long as the temperature is not too harsh, had a favourable effect on adult immunity. An abnormal, high temperature peak during pupal winter diapause significantly deteriorated the encapsulation capacity of emerged adults. The frequency and intensity of extreme weather events such as high temperature fluctuations are likely to increase with climate change. Thus, the climate change might have previously unknown influence on host-ectoparasite interactions, by affecting ectoparasite's immune defence and survival.

A new method is introduced for the evaluation of experimental stress–strain dependence in thermally cycled thin films. The method is demonstrated on the analysis of an Al thin film on a Si(100) substrate characterized using in situ high-temperature X-ray diffraction 25–450 °C. Diffraction data are used to evaluate in-plane elastic strain in the film as a function of thermal strain originating from the mismatch of thermal expansion coefficients (TECs) between the film and the substrate. The magnitude of the thermal strain is calculated from experimental TECs of the film and the substrate at every measurement temperature. By relating in-plane stresses to thermal strains, an experimental stress–strain dependence for the Al thin film is obtained. The proposed method allows one to identify elastic behavior and to quantify plastic strain in the film. Finally, advantages of the method are discussed in particular its independence from using TECs reported in the literature.

This work introduces a new simple approach to determine experimental X-ray elastic constants (XECs) of thin films by coupling the sin2ψ method and the substrate curvature technique. The approach is demonstrated on polycrystalline Cu thin films with the thickness 200, 800, and 2400 nm deposited on Si(100) substrates. Applying synchrotron radiation, the elastic strains in the films are determined using sin2ψ method while the macroscopic stresses are assessed by measuring the substrate curvature. The stresses are calculated using the Stoney formula from the radius of substrate curvature determined by the rocking curve measurement of substrate 400 reflection at different sample positions. Results show that the magnitude of the macroscopic stress in the films is proportional to the magnitude of the slope in the sin2ψ plots. On the basis of this observation, XECs of the films were calculated showing no dependence on the film thickness. The characterization of the samples was performed at the synchrotron source Hasylab.

The composite fiber materials of polymers (FRP) have physical properties, which are exploited recently for the reinforcement and rehabilitation of the structures, in mechanical, civil engineering and biomedical field, subjected to degradation or default risks. Since a beam without any form of reinforcement will fail when subjected to a relatively small tensile load. Therefore the use of the FRP to strengthen the structures is an effective solution to increase the overall strength technique. In this paper, a new theoretical approach model to estimate shear and peel-off stresses is proposed. Axial stresses and bending moment coupled with shear deformation and thermal effect in an FRP-strengthened beam are considered, including the variation in FRP plate fiber orientation.

Functional graded materials are generally provided in discretely layered structures to reduce the abrupt mismatch and to improve failure performance. To investigate the thermal stress singularity occurring at the intersection of an interface and a free end, two-dimensional and three-dimensional finite element analyses are performed for titanium and aluminum layers with or without functional graded materials. The results indicate that once the functional graded material is added, the stress singularity around the intersection of an interface and a free end could be significantly relieved. If more FGM layers are used, the stress singularity could be further reduced to a very small value. If the longitudinal normal stresses and interlaminar shear stress are considered, two-dimensional finite element analysis may be enough, while three-dimensional analysis is necessary for the interlaminar normal stress. Otherwise, one may underestimate its stress singularity.

W–Si–N films were deposited by reactive sputtering in a Ar + N2 atmosphere from a W target encrusted with different number of Si pieces and followed by a thermal annealing at increasing temperatures up to 900 °C. Three iron-based substrates with different thermal expansion coefficients, in the range of 1.5 × 10−6 to 18 × 10−6 K−1 were used. The chemical composition, structure, residual stress, hardness (H), and Young’s modulus (E) were evaluated after all the annealing steps. The as-deposited film with low N and Si contents was crystalline whereas the one with higher contents was amorphous. After thermal annealing at 900 °C the amorphous film crystallized as body-centered cubic α–W. The crystalline as-deposited film presented the same phase even after annealing. There were no significant changes in the properties of both films up to 800 °C annealing. However, at 900 °C, a strong decrease and increase in the hardness were observed for the crystalline and amorphous films, respectively. It was possible to find a good correlation between the residual stress and the hardness of the films. In several cases, particularly for the amorphous coating, H/E higher than 0.1 was reached, which envisages good tribological behavior. The two methods (curvature and x-ray diffraction) used for calculation of the residual stress of the coatings showed fairly good agreement in the results.