The study of very short-period contact binaries provides an important laboratory in which the most important and problematic astrophysical processes of stellar evolution take place. Short-period contact systems, such as CC Com, are particularly important for binary evolution. Close binary systems, especially those with multiple system members, have significant period variations, angular momentum loss mechanisms predominance, and pre-merger stellar evolution, making them valuable astrophysical laboratories. In this study, observations of CC Com, previously reported as a binary system, and new observations from the TÜBİTAK National Observatory (TUG) and the space-based telescope TESS have revealed that there is a third object with a period of about eight years and a fourth object with a period of about a century orbiting the binary system. From simultaneous analysis of all available light curves and radial velocities, the sensitive orbital and physical parameters of the system components are derived. The orbital parameters of the components are P$_\mathrm{A}=0.2206868 \pm 0.0000002$ days, P$_\mathrm{B}=7.9\pm0.1$ yr, P$_\mathrm{C}=98\pm5$ yr, $e_3$ = 0.06, $e_4$ = 0.44 and the physical parameters as M$_\mathrm{A1}=0.712\pm0.009$ M$_{\odot}$, M$_\mathrm{ A2}=0.372\pm0.005$ M$_{\odot}$, $m_{B;i^{\prime}=90^\circ}=0.074$ M$_{\odot}$, $m_{C;i^{\prime}=90^\circ}=0.18$ M$_{\odot}$, R$_\mathrm{A1}=0.693\pm0.006$ R$_{\odot}$, R$_\mathrm{A2}=0.514\pm0.005$ R$_{\odot}$, L$_\mathrm{A1}$ = 0.103 L$_\odot$, L$_\mathrm{A2}$ = 0.081 L$_\odot$. Finally, the evolutionary status of the multiple system CC Com and its component stars is discussed.

NASA’s all-sky survey mission, the Transiting Exoplanet Survey Satellite (TESS), is specifically engineered to detect exoplanets that transit bright stars. Thus far, TESS has successfully identified approximately 400 transiting exoplanets, in addition to roughly 6 000 candidate exoplanets pending confirmation. In this study, we present the results of our ongoing project, the Validation of Transiting Exoplanets using Statistical Tools (VaTEST). Our dedicated effort is focused on the confirmation and characterisation of new exoplanets through the application of statistical validation tools. Through a combination of ground-based telescope data, high-resolution imaging, and the utilisation of the statistical validation tool known as TRICERATOPS, we have successfully discovered eight potential super-Earths. These planets bear the designations: TOI-238b (1.61$^{+0.09} _{-0.10}$ R$_\oplus$), TOI-771b (1.42$^{+0.11} _{-0.09}$ R$_\oplus$), TOI-871b (1.66$^{+0.11} _{-0.11}$ R$_\oplus$), TOI-1467b (1.83$^{+0.16} _{-0.15}$ R$_\oplus$), TOI-1739b (1.69$^{+0.10} _{-0.08}$ R$_\oplus$), TOI-2068b (1.82$^{+0.16} _{-0.15}$ R$_\oplus$), TOI-4559b (1.42$^{+0.13} _{-0.11}$ R$_\oplus$), and TOI-5799b (1.62$^{+0.19} _{-0.13}$ R$_\oplus$). Among all these planets, six of them fall within the region known as ‘keystone planets’, which makes them particularly interesting for study. Based on the location of TOI-771b and TOI-4559b below the radius valley we characterised them as likely super-Earths, though radial velocity mass measurements for these planets will provide more details about their characterisation. It is noteworthy that planets within the size range investigated herein are absent from our own solar system, making their study crucial for gaining insights into the evolutionary stages between Earth and Neptune.

We present a demonstration version of a commensal pipeline for Fast Radio Burst (FRB) searches using a real-time incoherent beam from the Murchison Widefield Array (MWA). The main science target of the pipeline are bright nearby FRBs from the local Universe (including Galactic FRBs like from SGR 1935+2154) which are the best candidates to probe FRB progenitors and understand physical mechanisms powering these extremely energetic events. Recent FRB detections by LOFAR (down to 110 MHz), the Green Bank Telescope (at 350 MHz), and Canadian Hydrogen Intensity Mapping Experiment (CHIME) detections extending down to 400 MHz, prove that there is a population of FRBs that can be detected below 350 MHz. The new MWA beamformer, known as the ‘MWAX multibeam beamformer’, can form multiple incoherent and coherent beams (with different parameters) commensally to any ongoing MWA observations. One of the beams is currently used for FRB searches (tested in 10 kHz frequency resolution and time resolutions between 0.1 and 100 ms). A second beam (in 1 Hz and 1 s frequency and time resolutions, respectively) is used for the Search for Extraterrestrial Intelligence (SETI) project. This paper focuses on the FRB search pipeline and its verification on selected known bright pulsars. The pipeline uses the FREDDA implementation of the Fast Dispersion Measure Transform algorithm (FDMT) for single pulse searches. Initially, it was tested during standard MWA observations, and more recently using dedicated observations of a sample of 11 bright pulsars. The pulsar PSR J0835-4510 (Vela) has been routinely used as the primary probe of the data quality because its folded profile was always detected in the frequency band 200 – 230 MHz with typical signal-to-noise ratio $>$10, which agrees with the expectations. Similarly, the low dispersion measure pulsar PSR B0950+08 was always detected in folded profile in the frequency band 140–170 MHz and so far has been the only object for which single pulses were detected. We present the estimated sensitivity of the search in the currently limited observing bandwidth of a single MWA coarse channel (1.28 MHz) and for the upgraded, future system with 12.8 MHz (10 channels) of bandwidth. Based on expected sensitivity and existing FRB rate measurements, we project an FRB detection rate between a few and a few tens per year with large uncertainty due to unknown FRB rates at low frequencies.

In Paper I, we presented an overview of the Southern-sky MWA Rapid Two-metre (SMART) survey, including the survey design and search pipeline. While the combination of MWA’s large field-of-view and the voltage capture system brings a survey speed of ${\sim} 450\, {\textrm{deg}}^{2}\,\textrm{h}^{-1}$, the progression of the survey relies on the availability of compact configuration of the Phase II array. Over the past few years, by taking advantage of multiple windows of opportunity when the compact configuration was available, we have advanced the survey to 75% of the planned sky coverage. To date, about 10% of the data collected thus far have been processed for a first-pass search, where 10 min of observation is processed for dispersion measures out to 250 ${\textrm{pc cm}}^{-3}$, to realise a shallow survey that is largely sensitive to long-period pulsars. The ongoing analysis has led to two new pulsar discoveries, as well as an independent discovery and a rediscovery of a previously incorrectly characterised pulsar, all from ${\sim} 3\% $ of the data for which candidate scrutiny is completed. In this sequel to Paper I, we describe the strategies for further detailed follow-up including improved sky localisation and convergence to timing solution, and illustrate them using example pulsar discoveries. The processing has also led to re-detection of 120 pulsars in the SMART observing band, bringing the total number of pulsars detected to date with the MWA to 180, and these are used to assess the search sensitivity of current processing pipelines. The planned second-pass (deep survey) processing is expected to yield a three-fold increase in sensitivity for long-period pulsars, and a substantial improvement to millisecond pulsars by adopting optimal de-dispersion plans. The SMART survey will complement the highly successful Parkes High Time Resolution Universe survey at 1.2–1.5 GHz, and inform future large survey efforts such as those planned with the low-frequency Square Kilometre Array (SKA-Low).

We present an overview of the Southern-sky MWA Rapid Two-metre (SMART) pulsar survey that exploits the Murchison Widefield Array’s large field of view and voltage-capture system to survey the sky south of 30$^{\circ}$ in declination for pulsars and fast transients in the 140–170 MHz band. The survey is enabled by the advent of the Phase II MWA’s compact configuration, which offers an enormous efficiency in beam-forming and processing costs, thereby making an all-sky survey of this magnitude tractable with the MWA. Even with the long dwell times employed for the survey (4800 s), data collection can be completed in $<$100 h of telescope time, while still retaining the ability to reach a limiting sensitivity of $\sim$2–3 mJy (at 150 MHz, near zenith), which is effectively 3–5 times deeper than the previous-generation low-frequency southern-sky pulsar survey, completed in the 1990s. Each observation is processed to generate $\sim$5000–8000 tied-array beams that tessellate the full $\sim 610\, {\textrm{deg}^{2}}$ field of view (at 155 MHz), which are then processed to search for pulsars. The voltage-capture recording of the survey also allows a multitude of post hoc processing options including the reprocessing of data for higher time resolution and even exploring image-based techniques for pulsar candidate identification. Due to the substantial computational cost in pulsar searches at low frequencies, the survey data processing is undertaken in multiple passes: in the first pass, a shallow survey is performed, where 10 min of each observation is processed, reaching about one-third of the full-search sensitivity. Here we present the system overview including details of ongoing processing and initial results. Further details including first pulsar discoveries and a census of low-frequency detections are presented in a companion paper. Future plans include deeper searches to reach the full sensitivity and acceleration searches to target binary and millisecond pulsars. Our simulation analysis forecasts $\sim$300 new pulsars upon the completion of full processing. The SMART survey will also generate a complete digital record of the low-frequency sky, which will serve as a valuable reference for future pulsar searches planned with the low-frequency Square Kilometre Array.

We present the first observational study of pulsars performed with the second-generation precursor stations to the low-frequency component of the Square Kilometre Array (SKA-Low): the Aperture Array Verification System 2 (AAVS2) and the Engineering Development Array 2 (EDA2). Using the SKA-Low stations, we have observed 100 southern-sky pulsars between 70–350 MHz, including follow-up observations at multiple frequencies for a selected sample of bright pulsars. These observations have yielded detections of 22 pulsars, including the lowest-frequency detections ever published for 6 pulsars, despite the modest sensitivity of initial system where the recording bandwidth is limited to ${\sim}{1}\,\mathrm{MHz}$ . By comparing simultaneous flux density measurements obtained with the SKA-Low stations and performing rigorous electromagnetic simulations, we verify the accuracy of the SKA-Low sensitivity simulation code presented in Sokolowski (2022, PASA, 39, e015). Furthermore, we perform model fits to the radio spectra of the detected pulsars using the method developed by Jankowski (2018, MNRAS, 473, 4436), including nine pulsars which were not fitted in the original work. We robustly classify the spectra into five morphological classes and find that all but one pulsar exhibit deviations from simple power-law behaviour. These findings suggest that pulsars with well-determined spectra are more likely to show spectral flattening or turnover than average. Our work demonstrates how SKA-Low stations can be meaningfully used for scientifically useful measurements and analysis of pulsar radio spectra, which are important inputs for informing pulsar surveys and science planned with the SKA-Low.

MeerTime is a five-year Large Survey Project to time pulsars with MeerKAT, the 64-dish South African precursor to the Square Kilometre Array. The science goals for the programme include timing millisecond pulsar (MSPs) to high precision ( ${<} 1 \unicode{x03BC} \mathrm{s}$ ) to study the Galactic MSP population and to contribute to global efforts to detect nanohertz gravitational waves with the International Pulsar Timing Array (IPTA). In order to plan for the remainder of the programme and to use the allocated time most efficiently, we have conducted an initial census with the MeerKAT ‘L-band’ receiver of 189 MSPs visible to MeerKAT and here present their dispersion measures, polarisation profiles, polarisation fractions, rotation measures, flux density measurements, spectral indices, and timing potential. As all of these observations are taken with the same instrument (which uses coherent dedispersion, interferometric polarisation calibration techniques, and a uniform flux scale), they present an excellent resource for population studies. We used wideband pulse portraits as timing standards for each MSP and demonstrated that the MeerTime Pulsar Timing Array (MPTA) can already contribute significantly to the IPTA as it currently achieves better than $1\,\unicode{x03BC}\mathrm{s}$ timing accuracy on 89 MSPs (observed with fortnightly cadence). By the conclusion of the initial five-year MeerTime programme in 2024 July, the MPTA will be extremely significant in global efforts to detect the gravitational wave background with a contribution to the detection statistic comparable to other long-standing timing programmes.

The Murchison Widefield Array (MWA) is a low-frequency aperture array capable of high-time and frequency resolution astronomy applications such as pulsar studies. The large field-of-view of the MWA (hundreds of square degrees) can also be exploited to attain fast survey speeds for all-sky pulsar search applications, but to maximise sensitivity requires forming thousands of tied-array beams from each voltage-capture observation. The necessity of using calibration solutions that are separated from the target observation both temporally and spatially makes pulsar observations vulnerable to uncorrected, frequency-dependent positional offsets due to the ionosphere. These offsets may be large enough to move the source away from the centre of the tied-array beam, incurring sensitivity drops of ${\sim}30{-}50\%$ in Phase II extended array configuration. We analyse these offsets in pulsar observations and develop a method for mitigating them, improving both the source position accuracy and the sensitivity. This analysis prompted the development of a multi-pixel beamforming functionality that can generate dozens of tied-array beams simultaneously, which runs a factor of ten times faster compared to the original single-pixel version. This enhancement makes it feasible to observe multiple pulsars within the vast field of view of the MWA and supports the ongoing large-scale pulsar survey efforts with the MWA. We explore the extent to which ionospheric offset correction will be necessary for the MWA Phase III and the low-frequency square kilometre array (SKA-low).

The FAST Ultra-Deep Survey (FUDS) is a blind survey that aims for the direct detection of H i in galaxies at redshifts $z<0.42$ . The survey uses the multibeam receiver on the Five-hundred-metre Aperture Spherical Telescope (FAST) to map six regions, each of size $0.72\ \textrm{deg}^2$ at high sensitivity ( ${\sim}50\,\mu \textrm{Jy}$ ) and high-frequency resolution (23 kHz). The survey will enable studies of the evolution of galaxies and their H i content with an eventual sample size of ${\sim}1\,000$ . We present the science goals, observing strategy, the effects of radio frequency interference at the FAST site, our mitigation strategies and the methods for calibration, data reduction and imaging as applied to initial data. The observations and reductions for the first field, FUDS0, are completed, with around 128 H i galaxies detected in a preliminary analysis. Example spectra are given in this paper, including a comparison with data from the overlapping GAL2577 field of Arecibo Ultra-Deep Survey.

We describe the scientific goals and survey design of the First Large Absorption Survey in H i (FLASH), a wide field survey for 21-cm line absorption in neutral atomic hydrogen (H i) at intermediate cosmological redshifts. FLASH will be carried out with the Australian Square Kilometre Array Pathfinder (ASKAP) radio telescope and is planned to cover the sky south of $\delta \approx +40\,\deg$ at frequencies between 711.5 and 999.5 MHz. At redshifts between $z = 0.4$ and $1.0$ (look-back times of 4 – 8 Gyr), the H i content of the Universe has been poorly explored due to the difficulty of carrying out radio surveys for faint 21-cm line emission and, at ultra-violet wavelengths, space-borne searches for Damped Lyman- $\alpha$ absorption in quasar spectra. The ASKAP wide field of view and large spectral bandwidth, in combination with a radio-quiet site, will enable a search for absorption lines in the radio spectra of bright continuum sources over 80% of the sky. This survey is expected to detect at least several hundred intervening 21-cm absorbers and will produce an H i-absorption-selected catalogue of galaxies rich in cool, star-forming gas, some of which may be concealed from optical surveys. Likewise, at least several hundred associated 21-cm absorbers are expected to be detected within the host galaxies of radio sources at $0.4 < z < 1.0$ , providing valuable kinematical information for models of gas accretion and jet-driven feedback in radio-loud active galactic nuclei. FLASH will also detect OH 18-cm absorbers in diffuse molecular gas, megamaser OH emission, radio recombination lines, and stacked H i emission.

This report presents the results of optical polarimetric observations carried out with 6-m and 1-m telescopes at SAO RAS. The study of the blazar S5 0716+714 radiation showed the presence of a period of the variability of brightness and polarization vector variations on scales of ∼1.5 hours, constant on a long time scale; multi-colour monitoring of BL Lac polarization before, during and after the flare demonstrates the difference in the patterns of polarization vector variability depending on the wavelength. Several geometrical models and physical descriptions are discussed.

We present the first Southern-Hemisphere all-sky imager and radio-transient monitoring system implemented on two prototype stations of the low-frequency component of the Square Kilometre Array (SKA-Low). Since its deployment, the system has been used for real-time monitoring of the recorded commissioning data. Additionally, a transient searching algorithm has been executed on the resulting all-sky images. It uses a difference imaging technique to enable identification of a wide variety of transient classes, ranging from human-made radio-frequency interference to genuine astrophysical events. Observations at the frequency 159.375 MHz and higher in a single coarse channel ( $\approx$ 0.926 MHz) were made with 2 s time resolution, and multiple nights were analysed generating thousands of images. Despite having modest sensitivity ( $\sim$ few Jy beam–1), using a single coarse channel and 2-s imaging, the system was able to detect multiple bright transients from PSR B0950+08, proving that it can be used to detect bright transients of an astrophysical origin. The unusual, extreme activity of the pulsar PSR B0950+08 (maximum flux density $\sim$ 155 Jy beam–1) was initially detected in a ‘blind’ search in the 2020 April 10/11 data and later assigned to this specific pulsar. The limitations of our data, however, prevent us from making firm conclusions of the effect being due to a combination of refractive and diffractive scintillation or intrinsic emission mechanisms. The system can routinely collect data over many days without interruptions; the large amount of recorded data at 159.375 and 229.6875 MHz allowed us to determine a preliminary transient surface density upper limit of $1.32 \times 10^{-9} \text{deg}^{-2}$ for a timescale and limiting flux density of 2 s and 42 Jy, respectively. In the future, we plan to extend the observing bandwidth to tens of MHz and improve time resolution to tens of milliseconds in order to increase the sensitivity and enable detections of fast radio bursts below 300 MHz.

We discuss observational strategies to detect prompt bursts associated with gravitational wave (GW) events using the Australian Square Kilometre Array Pathfinder (ASKAP). Many theoretical models of binary neutron stars mergers predict that bright, prompt radio emission would accompany the merger. The detection of such prompt emission would greatly improve our knowledge of the physical conditions, environment, and location of the merger. However, searches for prompt emission are complicated by the relatively poor localisation for GW events, with the 90% credible region reaching hundreds or even thousands of square degrees. Operating in fly’s eye mode, the ASKAP field of view can reach $\sim1\,000$ deg$^2$ at $\sim$$888\,{\rm MHz}$. This potentially allows observers to cover most of the 90% credible region quickly enough to detect prompt emission. We use skymaps for GW170817 and GW190814 from LIGO/Virgo’s third observing run to simulate the probability of detecting prompt emission for GW events in the upcoming fourth observing run. With only alerts released after merger, we find it difficult to slew the telescope sufficiently quickly as to capture any prompt emission. However, with the addition of alerts released before merger by negative-latency pipelines, we find that it should be possible to search for nearby, bright prompt fast radio burst-like emission from GW events. Nonetheless, the rates are low: we would expect to observe $\sim$0.012 events during the fourth observing run, assuming that the prompt emission is emitted microseconds around the merger.

We present the results of a new selection technique to identify powerful ($L_{\rm 500\,MHz} \gt 10^{27}\,\text{WHz}^{-1}$) radio galaxies towards the end of the Epoch of Reionisation. Our method is based on the selection of bright radio sources showing radio spectral curvature at the lowest frequency (${\sim}100\,\text{MHz}$) combined with the traditional faintness in K-band for high-redshift galaxies. This technique is only possible, thanks to the Galactic and Extra-galactic All-sky Murchison Wide-field Array survey which provides us with 20 flux measurements across the 70–$230\,\text{MHz}$ range. For this pilot project, we focus on the GAMA 09 field to demonstrate our technique. We present the results of our follow-up campaign with the Very Large Telescope, Australian Telescope Compact Array, and the Atacama Large Millimetre Array to locate the host galaxy and to determine its redshift. Of our four candidate high-redshift sources, we find two powerful radio galaxies in the $1<z<3$ range, confirm one at $z=5.55$, and present a very tentative $z=10.15$ candidate. Their near-infrared and radio properties show that we are preferentially selecting some of the most radio luminous objects, hosted by massive galaxies very similar to powerful radio galaxies at $1<z<5$. Our new selection and follow-up technique for finding powerful radio galaxies at $z>5.5$ has a high 25–50% success rate.

We describe 14 yr of public data from the Parkes Pulsar Timing Array (PPTA), an ongoing project that is producing precise measurements of pulse times of arrival from 26 millisecond pulsars using the 64-m Parkes radio telescope with a cadence of approximately 3 weeks in three observing bands. A comprehensive description of the pulsar observing systems employed at the telescope since 2004 is provided, including the calibration methodology and an analysis of the stability of system components. We attempt to provide full accounting of the reduction from the raw measured Stokes parameters to pulse times of arrival to aid third parties in reproducing our results. This conversion is encapsulated in a processing pipeline designed to track provenance. Our data products include pulse times of arrival for each of the pulsars along with an initial set of pulsar parameters and noise models. The calibrated pulse profiles and timing template profiles are also available. These data represent almost 21 000 h of recorded data spanning over 14 yr. After accounting for processes that induce time-correlated noise, 22 of the pulsars have weighted root-mean-square timing residuals of $<\!\!1\,\mu\text{s}$ in at least one radio band. The data should allow end users to quickly undertake their own gravitational wave analyses, for example, without having to understand the intricacies of pulsar polarisation calibration or attain a mastery of radio frequency interference mitigation as is required when analysing raw data files.

GW170817, the merger of two neutron stars witnessed through both its gravitational wave siren and its glow at all wavelengths of light, represents the first multi-messenger detection of a compact binary merger. The association of the GW in-spiral signal from GW170817 with a γ-ray burst, a kilonova, and a non-thermal afterglow spanning all bands of the electromagnetic spectrum, has provided rich constraints on the physics and astrophysics of neutron stars. Starting from the example of GW170817, I briefly summarize recent results on observations of electromagnetic afterglows from gravitational wave triggers. In the light of these results, I highlight some key questions that are yet to be answered after the GW170817 discovery. I conclude by commenting briefly on some opportunities that lie in front of us, as improvements in ground-based gravitational wave detectors’ sensitivities will transform a trickle of multi-messenger discoveries into a flood, bringing the field of gravitational wave astronomy from its infancy to its maturity.

KV UMa (XTE J1118+480) is an X-ray binary that is known to undergo outbursts in 2000 and 2005. This paper presents the discovery of a large outburst starting in 1927 on the archival photographic plates and an analysis of the long-term optical activity of this system. We used the photographic data from DASCH (Digital Access to a Sky Century @ Harvard). We placed the 1927 outburst in the context of the observed outbursts of KV UMa. We show that it is a double event, with a precursor similar to the one of the outbursts in 2000. We find a big difference between the 1927 and 2000 outbursts as regards the length of the gap between the precursor and the main outburst. It is more than 250 d in 1927, whereas it is about 20 d in 2000, although the brightnesses of all peaks are mutually comparable. We also show that the individual optical outbursts of KV UMa differ from each other by the duration of the stage of a slow decline of brightness (sometimes roughly a plateau). This determines the length of the entire main outburst. Both the peak magnitude and the brightness of the outburst when the slow decline transitions to a steep final decaying branch plausibly reproduce in all three outbursts. In the interpretation, the short duration of the precursor is caused by the fact that only the thermal-viscous instability operated in the accretion disk while also the tidal instability of the disk contributed in the subsequent main outburst.

We present the second data release (DR2) of the SkyMapper Southern Survey, a hemispheric survey carried out with the SkyMapper Telescope at Siding Spring Observatory in Australia, using six optical filters: u, v, g, r, i, z. DR2 is the first release to go beyond the $\sim\!18$ mag (10 $\sigma$ ) limit of the Shallow Survey released in the first data release (DR1), and includes portions of the sky at full survey depth that reach $>\!21$ mag in g and r filters. The DR2 photometry has a precision as measured by internal reproducibility of 1% in u and v, and 0.7% in griz. More than 21 000 $\deg^2$ have data in some filters (at either Shallow or Main Survey depth) and over 7 000 $\deg^2$ have deep Main Survey coverage in all six filters. Finally, about 18 000 $\deg^2$ have Main Survey data in i and z filters, albeit not yet at full depth. The release contains over 120 000 images, as well as catalogues with over 500 million unique astrophysical objects and nearly 5 billion individual detections. It also contains cross-matches with a range of external catalogues such as Gaia DR2, Pan-STARRS1 DR1, GALEX GUVcat, 2MASS, and AllWISE, as well as spectroscopic surveys such as 2MRS, GALAH, 6dFGS, and 2dFLenS.

This paper describes the technical details and practical implementation of the phase synchronisation system selected for use by the Mid-Frequency Square Kilometre Array. Over a four-year period, the system has been tested on metropolitan fibre-optic networks, on long-haul overhead fibre at the South African Square Kilometre Array site, and on existing telescopes in Australia to verify its functional performance. The tests have shown that the system exceeds the 1-s Square Kilometre Array coherence loss requirement by a factor of 2 560, the 60-s coherence loss requirement by a factor of 239, and the 10-min phase drift requirement by almost five orders-of-magnitude. The paper also reports on tests showing that the system can operate within specification over all the required operating conditions, including maximum fibre link distance, temperature range, temperature gradient, relative humidity, wind speed, seismic resilience, electromagnetic compliance, frequency offset, and other operational requirements.

We provide the first in situ measurements of antenna element beam shapes of the Murchison Widefield Array. Most current processing pipelines use an assumed beam shape, which can cause absolute and relative flux density errors and polarisation ‘leakage’. Understanding the primary beam is then of paramount importance, especially for sensitive experiments such as a measurement of the 21-cm line from the epoch of reionisation, where the calibration requirements are so extreme that tile to tile beam variations may affect our ability to make a detection. Measuring the primary beam shape from visibilities is challenging, as multiple instrumental, atmospheric, and astrophysical factors contribute to uncertainties in the data. Building on the methods of Neben et al. [Radio Sci., 50, 614], we tap directly into the receiving elements of the telescope before any digitisation or correlation of the signal. Using ORBCOMM satellite passes we are able to produce all-sky maps for four separate tiles in the XX polarisation. We find good agreement with the beam model of Sokolowski et al. [2017, PASA, 34, e062], and clearly observe the effects of a missing dipole from a tile in one of our beam maps. We end by motivating and outlining additional on-site experiments.