Herbicide applications performed with pulse width modulation (PWM) sprayers to deliver specific spray droplet sizes could maintain product efficacy, minimize potential off-target movement, and increase flexibility in field operations. Given the continuous expansion of herbicide-resistant Palmer amaranth populations across the southern and midwestern United States, efficacious and cost-effective means of application are needed to maximize Palmer amaranth control. Experiments were conducted in two locations in Mississippi (2016, 2017, and 2018) and one location in Nebraska (2016 and 2017) for a total of 7 site-years. The objective of this study was to evaluate the influence of a range of spray droplet sizes [150 (Fine) to 900 μm (Ultra Coarse)] on lactofen and acifluorfen efficacy for Palmer amaranth control. The results of this research indicated that spray droplet size did not influence lactofen efficacy on Palmer amaranth. Palmer amaranth control and percent dry-biomass reduction remained consistent with lactofen applied within the aforementioned droplet size range. Therefore, larger spray droplets should be used as part of a drift mitigation approach. In contrast, acifluorfen application with 300-μm (Medium) spray droplets provided the greatest Palmer amaranth control. Although percent biomass reduction was numerically greater with 300-μm (Medium) droplets, results did not differ with respect to spray droplet size, possibly as a result of initial plant injury, causing weight loss, followed by regrowth. Overall, 900-μm (Ultra Coarse) droplets could be used effectively without compromising lactofen efficacy on Palmer amaranth, and 300-μm (Medium) droplets should be used to achieve maximum Palmer amaranth control with acifluorfen.

Palmer amaranth is one of the most troublesome weeds of soybean in the United States. To effectively control this weed it is necessary to optimize timing of PRE residual herbicides to mitigate Palmer amaranth emergence. Field studies were conducted in 5 site-years to assess the effect of application timing 12 to 16 d prior to planting (preplant) and at planting (PRE) on soybean injury and longevity of Palmer amaranth control using five residual herbicide treatments. A reduction in longevity of Palmer amaranth control was observed when S-metolachlor + metribuzin and flumioxazin + chlorimuron-ethyl were applied preplant vs. PRE in 2 of the 5 site years. Sulfentrazone, sulfentrazone + cloransulam-methyl, and saflufenacil + dimethenamid-P + pyroxasulfone + metribuzin did not reduce longevity of Palmer amaranth control when applied preplant vs. PRE in all 5 site-years. Visible estimates of soybean injury were lower at 21 d after planting when herbicides were applied 12 to 16 d preplant vs. PRE. These findings suggest that preplant applications can be used to reduce the potential for crop injury and may not result in reduced longevity of control when herbicides with a prolonged residual activity are used. Preplant herbicides increase the likelihood of the residuals being activated prior to subsequent weed emergence as opposed to PRE herbicides applied at soybean planting.

Herbicide carrier water hardness and pH can be variable depending on the source and geographic location. Herbicide efficacy can be affected by the pH and hardness of water used for spray solution. Field and greenhouse studies were conducted to evaluate the effect of carrier water pH and hardness on premixed dicamba and glyphosate efficacy. Treatments were combinations of water pH at 4, 6.5, or 9; and water hardness at 0 (deionized water), 400, or 800 mg L−1 of CaCO3 equivalent. In the field study, dicamba and glyphosate were applied at 0.55 and 1.11 kg ae ha−1, respectively, and half of these rates were applied in the greenhouse study. There was no interaction between carrier water pH and hardness on dicamba and glyphosate efficacy; however, the main effects of carrier water pH and hardness were significant. Herbicide efficacy was reduced with carrier water at pH 9 compared with pH 4. In the field study, common lambsquarters, common ragweed, horseweed, or Palmer amaranth control was improved 6% or more at carrier water at pH 4 compared with pH 9. Similar results were observed with water pH for giant ragweed, Palmer amaranth, or pitted morningglory control in the greenhouse study. Carrier water hardness at 400 or 800 mg L−1 reduced common ragweed, giant ragweed, or horseweed control compared with 0 mg L−1. Similarly, common lambsquarters, Palmer amaranth, or pitted morningglory control was reduced at least 10% with carrier water hardness at 800 mg L−1 compared with 0 mg L−1. These results indicate carrier water at acidic pH and of no hardness is critical for dicamba and glyphosate application, and spray solution needs to be amended appropriately for an optimum efficacy.

Hazelnut naturally grows as a multi-stemmed tree. The basal sprouts, known as suckers, grow throughout the season. Suckers are removed to promote a single trunk that facilitates production mechanization and increased yield. In western Oregon, herbicides are the most common method of sucker control, and at least four applications per season are performed in the spring and summer seasons. This study evaluated the efficacy of foliar-applied herbicides currently registered for sucker control in hazelnuts. Season-long and short-term field studies were conducted to assess the efficacy of herbicides to control hazelnut suckers. In the season-long studies, four consecutive applications of treatments that contained 2,4-D, glufosinate, or paraquat provided 50% to 80% control, maintained sucker height at 50 cm or less as compared to 155 cm for the nontreated control, and reduced sucker biomass by 87% as compared to the nontreated control. The short-term study results confirmed the efficacy of 2,4-D, glufosinate, and paraquat for sucker control, and in this study, carfentrazone and saflufenacil reduced sucker biomass to a level comparable to 2,4-D or glufosinate treatment. These results confirm that 2,4-D, glufosinate, paraquat, carfentrazone, and saflufenacil can be used for sucker control in hazelnut and emphasize the necessity of multiple applications during the growing season to control suckers in hazelnut. Proper herbicide selection is important to control suckers with success.

Herbicides are an important tool in managing weeds in turf and agricultural production. One of the earliest selective herbicides, 2,4-D, is a weak acid herbicide used to control broadleaf weeds. Water-quality parameters, such as pH and hardness, influence the efficacy of weak acid herbicides. Greenhouse experiments were conducted to evaluate how varying water hardness level, spray solution storage time, and adjuvant inclusion affected broadleaf weed control by 2,4-D dimethylamine. The first experiment evaluated a range of water-hardness levels (from 0 to 600 mg calcium carbonate [CaCO3] L−1) on efficacy of 2,4-D dimethylamine applied at 1.60 kg ae ha−1 for dandelion and horseweed control. A second experiment evaluated dandelion control from spray solutions prepared 0, 1, 4, 24, and 72 h before application. Dandelion and horseweed control by 2,4-D dimethylamine was reduced when the CaCO3 level in water was at least 422 or at least 390 mg L−1, respectively. Hard-water antagonism was overcome by the addition of 20 g L−1 ammonium sulfate (AMS) into the mixture. When AMS was included in spray mixtures, no differences were observed at 600 mg CaCO3 L−1, compared with distilled water. Spray solution storage time did not influence dandelion control, regardless of water-hardness level or adjuvant inclusion. To prevent antagonism, applicators should use a water-conditioning agent such as AMS when applying 2,4-D dimethylamine in hard water.

Field studies were conducted in 2017 and 2018 in Arkansas to evaluate the injury caused by herbicides on soybean canopy formation and yield. Fomesafen, acifluorfen, S-metolachlor + fomesafen, and S-metolachlor + fomesafen + chlorimuron alone and in combination with glufosinate were applied to glufosinate-resistant soybean at the V2 growth stage. Soybean injury resulting from these labeled herbicide treatments ranged from 9% to 25% at 2 wk after application. This level of injury resulted in a 4-, 5-, 6-, and 6-d delay in soybean reaching 80% groundcover following fomesafen, acifluorfen, S-metolachlor + fomesafen, and S-metolachlor + fomesafen + chlorimuron, respectively. There was a 2-d delay in soybean reaching a canopy volume of 15,000 cm3 following each of the four herbicide treatments. The addition of glufosinate to the herbicide applications resulted in longer delays in canopy formation with every herbicide treatment except glufosinate + fomesafen. Fomesafen, acifluorfen, S-metolachlor + fomesafen, and S-metolachlor + fomesafen + chlorimuron, each applied with glufosinate, delayed soybean from reaching 80% groundcover by 2, 7, 8, and 9 d, respectively, and delayed the number of days for soybean to reach a canopy volume of 15,000 cm3 by 2, 3, 2, and 2 d, respectively. No yield loss occurred with any herbicide application. A delay in percent groundcover in soybean allows sunlight to reach the soil surface for longer periods throughout the growing season, possibly promoting late-season weed germination and the need for an additional POST herbicide application.

Herbicide-resistant weeds pose a severe threat to sustainable vegetation management in various production systems worldwide. The majority of the herbicide resistance cases reported thus far originate from agronomic production systems where herbicide use is intensive, especially in industrialized countries. Another notable sector with heavy reliance on herbicides for weed control is managed turfgrass systems, particularly golf courses and athletic fields. Intensive use of herbicides, coupled with a lack of tillage and other mechanical tools that are options in agronomic systems, increases the risk of herbicide-resistant weeds evolving in managed turfgrass systems. Among the notable weed species at high risk for evolving resistance under managed turf systems in the United States are annual bluegrass, goosegrass, and crabgrasses. The evolution and spread of multiple herbicide resistance, an emerging threat facing the turfgrass industry, should be addressed with the use of diversified management tools. Target-site resistance has been reported commonly as a mechanism of resistance for many herbicide groups, though non–target site resistance is an emerging concern. Despite the anecdotal evidence of the mounting weed resistance issues in managed turf systems, the lack of systematic and periodic surveys at regional and national scales means that confirmed reports are very limited and sparse. Furthermore, currently available information is widely scattered in the literature. This review provides a concise summary of the current status of herbicide-resistant weeds in managed turfgrass systems in the United States and highlights key emerging threats.

Leafy spurge, a noxious perennial weed, is a major threat to the prairie ecosystem in North America. Strategic planning to control leafy spurge requires monitoring its spatial distribution and spread. The ability to detect flowering leafy spurge at two biological control sites in southern Saskatchewan, Canada, was investigated using an unmanned aerial vehicle (UAV) system. Three flight missions were conducted on June 30, 2016, during the leafy spurge flowering period. Imagery was acquired at four flight heights and one or two acquisition times, depending on the site. The sites were reflown on June 28, 2017, to evaluate the change in flowering leafy spurge over time. Mixture tuned matched filtering (MTMF) and hue, intensity, and saturation (HIS) threshold analyses were used to determine flowering leafy spurge cover. Flight height of 30 m was optimal; the strongest relationships between UAV and ground estimates of leafy spurge cover (r2 = 0.76 to 0.90; normalized root mean square error [NRMSE] = 0.10 to 0.13) and stem density (r2 = 0.72 to 0.75) were observed. Detection was not significantly affected by the image analysis method (P > 0.05). Flowering leafy spurge cover estimates were similar using HIS (1.9% to 14.8%) and MTMF (2.1% to 10.3%) and agreed with the ground estimates (using HIS: r2 = 0.64 to 0.93, NRMSE = 0.08 to 0.25; using MTMF: r2 = 0.64 to 0.90, NRMSE = 0.10 to 0.27). The reduction in flowering leafy spurge cover between 2016 and 2017 detected using UAV images and HIS (8.1% at site 1 and 2.7% at site 2) was consistent with that based on ground digital photographs (10% at site 1 and 1.8% at site 2). UAV imagery is a useful tool for accurately detecting flowering leafy spurge and could be used for routine monitoring purposes in a biological control program.

Leafy spurge (Euphorbia esula L.) and purple loosestrife (Lythrum salicaria L.) are invasive weeds that displace native vegetation. Herbicides are often applied to these weeds during flowering, so it would be ideal to identify them early in the season, possibly by the leaves. This paper evaluates the spectral separability of the inflorescences and leaves of these plants from surrounding vegetation. Leafy spurge, purple loosestrife, and surrounding vegetation were collected from sites in southeastern North Dakota and subjected to spectral analysis. Partial least-squares discriminant analysis (PLS-DA) was used to separate the spectral signatures of these weeds in the visible and near-infrared wavelengths. Using PLS-DA, the weeds were discriminated from their surroundings with R2 values of 0.86 to 0.92. Analysis of the data indicated that the bands contributing the most to each model were in the red and red-edge spectral regions. Identifying these weeds by the leaves allows them to be mapped earlier in the season, providing more time for herbicide application planning. The spectral signatures identified in this proof of concept study are the first step before using ultra–high resolution aerial imagery to classify and identify leafy spurge and purple loosestrife.

Pintoi peanut is a warm-season perennial legume that shows promise as a forage crop for the southeastern United States, however, little is known about the proper methods of weed management during establishment for this species. The objective of this study was to determine the ability of pintoi peanut to tolerate applications of PRE and POST herbicides during the year of and year after planting. The effects of herbicide treatments on percentage of visual estimates of injury and stand counts of pintoi peanut were investigated at Ona and Marianna, FL, in 2015 and 2016. All PRE herbicides did not result in significant injury or stand reduction. Pintoi peanut’s tolerance to POST herbicides was higher when plants were emerged for at least 2 wk prior to herbicide application. Stands of pintoi peanut that were planted the previous year appear to tolerate all herbicides examined in this work, except sulfosulfuron. Results of this study indicate that at the year of planting pintoi peanut is tolerant to PRE applications of pendimethalin, imazethapyr, and imazapic. Pintoi peanut appears to tolerate applications of 2,4-D, carfentrazone, imazapic and imazethapyr the year after planting at the rates utilized in this study. Future research should evaluate the effects of multiple herbicide applications and tank-mixes to obtain satisfactory weed control and selectivity in pintoi peanut swards.

Narrow-windrow burning has been a successful form of harvest weed seed control in Australian cropping systems, but little is known about the efficacy of narrow-windrow burning on weed seeds infesting U.S. cropping systems. An experiment was conducted using a high-fire kiln that exposed various grass and broadleaf weed seeds to temperatures of 200, 300, 400, 500, and 600 C for 20, 40, 60, and 80 s to determine the temperature and time needed to kill weed seeds. Weeds evaluated included Italian ryegrass, barnyardgrass, johnsongrass, sicklepod, Palmer amaranth, prickly sida, velvetleaf, pitted morningglory, and hemp sesbania. Two field experiments were also conducted over consecutive growing seasons, with the first experiment aimed at determining the amount of heat produced during burning of narrow windrows of soybean harvest residues (chaff and straw) and the effect of this heat on weed seed mortality. The second field experiment aimed to determine the effect of wind speed on the duration and intensity of burning narrow windrows of soybean harvest residues. Following exposure to the highest temperature and longest duration in the kiln, only sicklepod showed any survival (<1% average); however, in most cases, the seeds were completely destroyed (ash). A heat index of only 22,600 was needed to kill all seeds of Palmer amaranth, barnyardgrass, and Italian ryegrass. In the field, all seeds of the evaluated weed species were completely destroyed by narrow-windrow burning of 1.08 to 1.95 kg m−2 of soybean residues. The burn duration of the soybean harvest residues declined as wind speed increased. Findings from the kiln and field experiments show that complete kill is likely for weed seeds concentrated into narrow windrows of burned soybean residues. Given the low cost of implementation of narrow-windrow burning and the seed kill efficacy on various weed species, this strategy may be an attractive option for destroying weed seed.

Herbicide resistance has for decades been an increasing problem of agronomic crops such as corn and soybean. Several weed species have evolved herbicide resistance in turfgrass systems such as golf courses, sports fields, and sod production—particularly biotypes of annual bluegrass and goosegrass. Consequences of herbicide resistance in agronomic cropping systems indicate what could happen in turfgrass if herbicide resistance becomes broader in terms of species, distribution, and mechanisms of action. The turfgrass industry must take action to develop effective resistance management programs while this problem is still relatively small in scope. We propose that lessons learned from a series of national listening sessions conducted by the Herbicide Resistance Education Committee of the Weed Science Society of America to better understand the human dimensions affecting herbicide resistance in crop production provide tremendous insight into what themes to address when developing effective resistance management programs for the turfgrass industry.

Weed competition severely constrains cassava root yield in sub-Saharan Africa; thus, good weed control measures, including the use of herbicides, are increasingly important. Herbicide trials were conducted at five locations across eastern, western, and north-central Nigeria over two cropping seasons (2014 and 2015). Nineteen premixed PRE herbicides applied at different rates were evaluated for efficacy on weeds and selectivity on cassava. Manual hoe-weeding at 4, 8, and 12 wk after planting (WAP) and two S-metolachlor + atrazine treatments commonly used by cassava growers were included for comparison. Six of the 19 PRE herbicide treatments (indaziflam + isoxaflutole, indaziflam + metribuzin, flumioxazin + pyroxasulfone, isoxaflutole, acetochlor + atrazine + terbuthylazine, and terbuthylazine + S-metolachlor) consistently provided 80% to 98% broadleaf and grass weed control up to 8 wk after treatment. Overall, PRE herbicide treatments and cassava yield were significantly positively correlated. Herbicide treatments terbuthylazine + S-metolachlor, flumioxazin + pyroxasulfone, diflufenican + flufenacet + flurtamone (respectively, 60 + 60 + 60, 120 + 120 + 120, 90 + 360 + 120, and 135 + 360 + 180 g ha−1), acetochlor + atrazine + terbuthylazine (875 + 875 + 875 g ha−1), S-metolachlor + atrazine (870 + 1,110 g ha−1), oxyfluorfen (240 g ha−1), indaziflam + isoxaflutole (75 + 225 g ha−1), indaziflam + metribuzin (75 + 960 g ha−1), and aclonifen + isoxaflutole (500 + 75 g ha−1) contributed to yields exceeding twice the Nigerian national average of 8.76 tonnes ha−1. These treatments had root yields of 1.4 to 2 times higher than plots that had been hoe-weeded three times. There were some adverse herbicide treatment effects such as delayed cassava sprouting and temporary leaf bleaching observed in indaziflam and diflufenican + flufenacet + flurtamone treatments, whereas sulfentrazone caused prolonged leaf crinkling. The PRE applications alone at rates safe for cassava did not provide adequate season-long weed control; supplemental POST weed control is needed about 10 WAP for satisfactory season-long control.

Doveweed is a problematic weed species in many agricultural ecosystems as well as on roadsides and rights-of-way. Effective POST chemical control options for doveweed are limited in many cropping systems. Greenhouse studies were conducted to evaluate the effectiveness of metsulfuron-methyl dose and the impact of mixtures and sequential applications of either trifloxysulfuron-sodium or bentazon with metsulfuron-methyl for doveweed control. By 14 d after the initial treatment, applying 0.04 kg ai ha−1 metsulfuron-methyl, either once or sequentially, provided 100% control of doveweed. Application of trifloxysulfuron-sodium at 0.04 kg ai ha−1 alone or in mixture with metsulfuron-methyl (0.04 kg ha−1) did not provide consistent doveweed control nor did it reduce biomass. Trifloxysulfuron-sodium applied alone at 0.08 kg ha−1 or in a mixture with metsulfuron-methyl (0.04 kg ha−1) provided consistent doveweed control (>80%). A single application of bentazon (0.56 kg ai ha−1) was ineffective at controlling doveweed. A single application of the bentazon and metsulfuron-methyl mixture (0.56 + 0.04 kg ha−1, respectively) or sequential applications of either bentazon alone (0.56 kg ha−1) or in mixture with metsulfuron-methyl (0.04 kg ha−1) provided excellent doveweed control (100%) by 35 d after treatment. Overall, single applications of metsulfuron-methyl (0.02 to 0.17 kg ha−1) or mixtures of metsulfuron-methyl with trifloxysulfuron-sodium (0.04 + 0.08 kg ha−1, respectively) or bentazon (0.04 + 0.56 kg ha−1, respectively) controlled doveweed and may be useful for enhancing the control spectrum for other weeds. Sequential applications of the bentazon and metsulfuron-methyl mixture (0.56 + 0.04 kg ha−1, respectively) provided doveweed control and are a resistance-management strategy for doveweed.

Dicamba and 2,4-D exposure to sensitive crops, such as dry bean, is of great concern with the recent registrations of dicamba- and 2,4-D–resistant soybean. In 2017 and 2018, field experiments were conducted at two Michigan locations to understand how multiple factors, including dry bean market class, herbicide rate, and application timing, influence dry bean response to dicamba and 2,4-D. Dicamba and 2,4-D at rates of 0.1%, 1%, and 10% of the field use rate for dicamba and 2,4-D choline were applied to V2 and V8 black and navy bean. Field-use rates for dicamba and 2,4-D choline were 560 and 1,120 g ae ha−1, respectively. There were few differences between market classes or application timings when dry bean was exposed to dicamba or 2,4-D. Estimated rates to cause 20% dry bean injury 14 d after treatment were 4.5 and 107.5 g ae ha−1 for dicamba and 2,4-D, respectively. When dicamba was applied at 56 g ae ha−1, light interception was reduced up to 51% and maturity was delayed up to 16 d. Although both herbicides caused high levels of injury to dry bean, yield reductions were not consistently observed. At four site-years, 2,4-D did not reduce dry bean yield or seed weight with any rate tested. However, when averaged over site-years, dicamba rates of 3.7, 9.8 and 17.9 g ae ha−1 were estimated to cause 5%, 10%, and 15% yield loss, respectively. Dicamba also reduced seed weight by 10% when 56 g ae ha−1 was applied. However, the germination of harvested seed was not affected by dicamba or 2,4-D. Long delays in dry bean maturity from dicamba injury can also indirectly increase losses in yield and quality due to harvestability issues. This work further stresses the need for caution when using dicamba or 2,4-D herbicides near sensitive crops.

Weed management in carrot is challenging, given slow and inconsistent crop emergence and early-season growth and the lack of practical season-long management tools such as herbicides. We investigated holistic carrot production systems with a focus on minimizing inputs while optimizing resource use. In an overall sense, results of this work were consistent between years, and stark. The choice of carrot variety had a moderate influence on carrot foliar canopy development and, subsequently, weed density. For example, ‘Cupar’ carrot formed a complete crop canopy sooner than the other dicer-type ‘Canada’ variety. Likely as a result, density of weed species such as spotted ladysthumb and common lambsquarters was less where ‘Cupar’ was grown compared with where ‘Canada’ was grown. Gibberellic acid as a foliar application was not successful in these studies and, in a few cases, may have even increased weed-seed germination and establishment. Adding two carrot rows to the current regional industry-standard three-row bed system not only enhanced competitiveness with weeds but also improved carrot yield without additional fertilizer, water, or pest management inputs. By far, though, the most successful strategy to reduce weed density while maintaining or improving carrot yield was to delay seeding by 17 to 19 d. We anticipate more holistic production system research that integrates low-input alternatives in other crops as herbicide-resistant weeds proliferate while few new herbicides are developed. As was demonstrated in this research, such novel approaches can be successful without adding significant economic burden to the farmer or increasing risk of crop failure.

This study consisting of six field experiments was conducted in 2018 and 2019 to evaluate the tolerance of four corn hybrids (P9998AM, P9840AM, DKC42-60RIB, and DKC43-47RIB) to the tank mix of tolpyralate + atrazine with a commercial glyphosate formulation. At 1 wk after application (WAA), two corn hybrids (P9998AM and P9840AM) exhibited more injury from tolpyralate + atrazine (2× rate) applied alone and in combination with glyphosate than DKC42-60RIB and DKC43-47RIB; however, all corn hybrids responded similarly with respect to visible injury 2, 4, and 8 WAA, stand loss, and yield. Application of tolpyralate + atrazine or glyphosate + tolpyralate + atrazine at the 2× rate caused greater corn injury (up to 27%) than tolpyralate + atrazine or glyphosate + tolpyralate + atrazine at the 1× rate (up to 8%) at 1 WAA. The addition of commercial glyphosate with tolpyralate + atrazine did not enhance injury symptoms. Results of this study show that there is a wide margin of corn safety with tolpyralate + atrazine applied alone and in combination with a commercial formulation of glyphosate.

Downy brome, feral rye, and jointed goatgrass are problematic winter annual grasses in central Great Plains winter wheat production. Integrated control strategies are needed to manage winter annual grasses and reduce selection pressure exerted on these weed populations by the limited herbicide options currently available. Harvest weed-seed control (HWSC) methods aim to remove or destroy weed seeds, thereby reducing seed-bank enrichment at crop harvest. An added advantage is the potential to reduce herbicide-resistant weed seeds that are more likely to be present at harvest, thereby providing a nonchemical resistance-management strategy. Our objective was to assess the potential for HWSC of winter annual grass weeds in winter wheat by measuring seed retention at harvest and destruction percentage in an impact mill. During 2015 and 2016, 40 wheat fields in eastern Colorado were sampled. Seed retention was quantified and compared per weed species by counting seed retained above the harvested fraction of the wheat upper canopy (15 cm and above), seed retained below 15 cm, and shattered seed on the soil surface at wheat harvest. A stand-mounted impact mill device was used to determine the percent seed destruction of grass weed species in processed wheat chaff. Averaged across both years, seed retention (±SE) was 75% ± 2.9%, 90% ± 1.7%, and 76% ± 4.3% for downy brome, feral rye, and jointed goatgrass, respectively. Seed retention was most variable for downy brome, because 59% of the samples had at least 75% seed retention, whereas the proportions for feral rye and jointed goatgrass samples with at least 75% seed retention were 93% and 70%, respectively. Weed seed destruction percentages were at least 98% for all three species. These results suggest HWSC could be implemented as an integrated strategy for winter annual grass management in central Great Plains winter wheat cropping systems.

Herbicides used in sugarbeet are commonly adapted from other row crops and may cause injury and yield loss often associated with environmental and edaphic factors. Glyphosate-resistant waterhemp in sugarbeet requires a PRE herbicide, such as S-metolachlor, for its control. The objectives of this research were to evaluate sugarbeet tolerance to PRE S-metolachlor, including air temperature and soil water content interactions with soil series in field and growth chamber experiments. Results from field experiments conducted in 12 environments in 2015, 2016, and 2017 indicated 2.16 or 4.32 kg ai ha−1S-metolachlor applied PRE reduced sugarbeet density and stature but did not reduce root yield, sucrose content, or recoverable sucrose compared with the untreated control in environments with soils with less than 3.5% organic matter (OM) and receiving greater than 40-mm cumulative rainfall within 14 d after planting. In the growth chamber, sugarbeet density and shoot fresh weight following S-metolachlor application was influenced by soil moisture content, air temperature, and soil series but not by S-metolachlor rate. Sugarbeet density and shoot fresh weight were reduced 15% and 106%, respectively, when S-metolachlor was applied to a Glyndon sandy loam (2.6% OM, 9.5% clay) at 100% field capacity (FC) and 14 C compared with S-metolachlor application to a Fargo silty clay (7.7% OM and 54% clay) at 100% FC and 21 C. It is concluded that field selection, rather than herbicide rate, is an important criterion for managing sugarbeet tolerance with S-metolachlor.

Putative glyphosate-resistant sourgrass was collected to determine its resistance level and to evaluate its metabolic profile after resistance. Although accumulation of shikimic acid is known to occur in glyphosate-susceptible populations, differences in the ability of resistant (R) and susceptible (S) biotypes to accumulate quinic acid, salicylic acid, and aminomethylphosphonic acid (AMPA) have been studied to a lesser extent. Our objective was to confirm glyphosate resistance in sourgrass and to understand the metabolic profile of these plants in response to the herbicide. Greenhouse experiments were carried out from January 2016 to June 2018. There were no significant differences in glyphosate translocation in the plants. No metabolism of glyphosate to AMPA was observed; therefore, metabolism of glyphosate to AMPA is not a mechanism in R biotypes. S biotypes showed higher concentrations of shikimic acid and quinic acid before glyphosate and accumulated less of both secondary acids in treated leaves 72 h after glyphosate application. Resistant biotypes showed higher concentrations of salicylic acid before glyphosate application.