Breakthrough Listen is a 10-yr initiative to search for signatures of technologies created by extraterrestrial civilisations at radio and optical wavelengths. Here, we detail the digital data recording system deployed for Breakthrough Listen observations at the 64-m aperture CSIRO Parkes Telescope in New South Wales, Australia. The recording system currently implements two modes: a dual-polarisation, 1.125-GHz bandwidth mode for single-beam observations, and a 26-input, 308-MHz bandwidth mode for the 21-cm multibeam receiver. The system is also designed to support a 3-GHz single-beam mode for the forthcoming Parkes ultra-wideband feed. In this paper, we present details of the system architecture, provide an overview of hardware and software, and present initial performance results.

Merger trees harvested from cosmological N-body simulations encode the assembly histories of dark matter halos over cosmic time and are a fundamental component of semi-analytical models of galaxy formation. The ability to compare the tools used to construct merger trees, namely halo finders and tree building algorithms, in an unbiased and systematic manner is critical to assess the quality of merger trees. In this paper, we present the dendrogram, a novel method to visualise merger trees, which provides a comprehensive characterisation of a halo’s assembly history—tracking subhalo orbits, halo merger events, and the general evolution of halo properties. We show the usefulness of the dendrogram as a diagnostic tool of merger trees by comparing halo assembly simulation analysed with three different halo finders—VELOCIraptor, AHF, and Rockstar—and their associated tree builders. Based on our analysis of the resulting dendrograms, we highlight how they have been used to motivate improvements to VELOCIraptor. The dendrogram software is publicly available online, at: https://github.com/rhyspoulton/MergerTree-Dendrograms.

The low-frequency polarisation properties of radio sources are poorly studied, particularly in statistical samples. However, the new generation of low-frequency telescopes, such as the Murchison Widefield Array (the precursor for the low-frequency component of the Square Kilometre Array) offers an opportunity to probe the physics of radio sources at very low radio frequencies. In this paper, we present a catalogue of linearly polarised sources detected at 216 MHz, using data from the Galactic and Extragalactic All-sky Murchison Widefield Array survey. Our catalogue covers the Declination range –17° to –37° and 24 h in Right Ascension, at a resolution of around 3 arcminutes. We detect 81 sources (including both a known pulsar and a new pulsar candidate) with linearly polarised flux densities in excess of 18 mJy across a survey area of approximately 6 400 deg2, corresponding to a surface density of 1 source per 79 deg2. The level of Faraday rotation measured for our sources is broadly consistent with those recovered at higher frequencies, with typically more than an order of magnitude improvement in the uncertainty compared to higher-frequency measurements. However, our catalogue is likely incomplete at low Faraday rotation measures, due to our practice of excluding sources in the region where instrumental leakage appears. The majority of sources exhibit significant depolarisation compared to higher frequencies; however, a small sub-sample repolarise at 216 MHz. We also discuss the polarisation properties of four nearby, large-angular-scale radio galaxies, with a particular focus on the giant radio galaxy ESO 422–G028, in order to explain the striking differences in polarised morphology between 216 MHz and 1.4 GHz.

For core-collapse and neutron star merger simulations, it is important to have adequate equations of state which describe dense and hot matter as realistically as possible. We present two newly constructed equations of state including the entire baryon octet, compatible with the main constraints coming from nuclear physics, both experimental and theoretical. One of the equations of state describes cold β-equilibrated neutron stars with a maximum mass of 2 Msun. Results obtained with the new equations of state are compared with the ones of DD2Y, the only existing equation of state containing the baryon octet and satisfying the above constraints. The main difference between our new equations of state and DD2Y is the harder symmetry energy of the latter. We show that the density dependence of the symmetry energy has a direct influence on the amount of strangeness inside hot and dense matter and, consequently, on thermodynamic quantities. We expect that these differences affect the evolution of a proto-neutron star or binary neutron star mergers. We propose also several parameterisations based on the DD2 and SFHo models calibrated to Lambda hypernuclei that satisfy the different constraints.

We provide the first in situ measurements of antenna element beam shapes of the Murchison Widefield Array. Most current processing pipelines use an assumed beam shape, which can cause absolute and relative flux density errors and polarisation ‘leakage’. Understanding the primary beam is then of paramount importance, especially for sensitive experiments such as a measurement of the 21-cm line from the epoch of reionisation, where the calibration requirements are so extreme that tile to tile beam variations may affect our ability to make a detection. Measuring the primary beam shape from visibilities is challenging, as multiple instrumental, atmospheric, and astrophysical factors contribute to uncertainties in the data. Building on the methods of Neben et al. [Radio Sci., 50, 614], we tap directly into the receiving elements of the telescope before any digitisation or correlation of the signal. Using ORBCOMM satellite passes we are able to produce all-sky maps for four separate tiles in the XX polarisation. We find good agreement with the beam model of Sokolowski et al. [2017, PASA, 34, e062], and clearly observe the effects of a missing dipole from a tile in one of our beam maps. We end by motivating and outlining additional on-site experiments.

Molecular line intensity calculations are not a straightforward task. We present a description of the basics for including molecular lines in synthetic spectra and of the input data needed. We aim both at describing ways in which molecular lines are computed in the context of photospheres of F–G–K stars, and to present a new online available version of our code for spectrum synthesis of cool stars. We apply calculations to molecular bands in the ultraviolet, visible, and near-infrared main features, and comparisons with spectra of reference stars are shown. We provide user-friendly tools for the free use of the code Pfant. The code is available at http://trevisanj.github.io/PFANT.

GravityCam is a new concept of ground-based imaging instrument capable of delivering significantly sharper images from the ground than is normally possible without adaptive optics. Advances in optical and near-infrared imaging technologies allow images to be acquired at high speed without significant noise penalty. Aligning these images before they are combined can yield a 2.5–3-fold improvement in image resolution. By using arrays of such detectors, survey fields may be as wide as the telescope optics allows. Consequently, GravityCam enables both wide-field high-resolution imaging and high-speed photometry. We describe the instrument and detail its application to provide demographics of planets and satellites down to Lunar mass (or even below) across the Milky Way. GravityCam is also suited to improve the quality of weak shear studies of dark matter distribution in distant clusters of galaxies and multiwavelength follow-ups of background sources that are strongly lensed by galaxy clusters. The photometric data arising from an extensive microlensing survey will also be useful for asteroseismology studies, while GravityCam can be used to monitor fast multiwavelength flaring in accreting compact objects and promises to generate a unique data set on the population of the Kuiper belt and possibly the Oort cloud.

With the recent discovery of a dozen dusty star-forming galaxies and around 30 quasars at z > 5 that are hyper-luminous in the infrared (μ LIR > 1013 L⊙, where μ is a lensing magnification factor), the possibility has opened up for SPICA, the proposed ESA M5 mid-/far-infrared mission, to extend its spectroscopic studies toward the epoch of reionisation and beyond. In this paper, we examine the feasibility and scientific potential of such observations with SPICA’s far-infrared spectrometer SAFARI, which will probe a spectral range (35–230 μm) that will be unexplored by ALMA and JWST. Our simulations show that SAFARI is capable of delivering good-quality spectra for hyper-luminous infrared galaxies at z = 5 − 10, allowing us to sample spectral features in the rest-frame mid-infrared and to investigate a host of key scientific issues, such as the relative importance of star formation versus AGN, the hardness of the radiation field, the level of chemical enrichment, and the properties of the molecular gas. From a broader perspective, SAFARI offers the potential to open up a new frontier in the study of the early Universe, providing access to uniquely powerful spectral features for probing first-generation objects, such as the key cooling lines of low-metallicity or metal-free forming galaxies (fine-structure and H2 lines) and emission features of solid compounds freshly synthesised by Population III supernovae. Ultimately, SAFARI’s ability to explore the high-redshift Universe will be determined by the availability of sufficiently bright targets (whether intrinsically luminous or gravitationally lensed). With its launch expected around 2030, SPICA is ideally positioned to take full advantage of upcoming wide-field surveys such as LSST, SKA, Euclid, and WFIRST, which are likely to provide extraordinary targets for SAFARI.

We present results of a supernova lightcurve population synthesis, predicting the range of possible supernova lightcurves arising from a population of progenitor stars that include interacting binary systems. We show that the known diversity of supernova lightcurves can be interpreted as arising from binary interactions. Given detailed models of the progenitor stars, we are able to the determine what parameters within these stars determine the shape of their supernova lightcurve. The primary factors are the mass of supernova ejecta and the mass of hydrogen in the final progenitor. We find that there is a continuum of lightcurve behaviour from type IIP, IIL, to IIb supernovae related to the range of hydrogen and ejecta masses. Most type IIb supernovae arise from a relatively narrow range of initial masses from 10 to 15 M⊙. We also find a few distinct lightcurves that are the result of stellar mergers.