MBSE and SysML are increasingly finding their applications in industry as well as in academia. The reuse of the information described in SysML models depends, among others, on the modelling methods, management of dependencies between elements and on the needed remodelling effort. In this paper, a modelling method is presented that address the reuse of SysML models and descriptions as well as reuse of model variants in SysML. A case example is presented to explain the modelling methods and the gained experience is summarised in the form of general recommendations for further use.

Electric vertical take-off and landing aircraft (eVTOLs) have been accessed on various configurations over the past decade. This literature review deals with the issue of determining the appropriate design for an Autonomous Passenger Drone (APD). APDs have been compared with VTOLs on their pros and cons. The authors analysed aerodynamics and propulsion systems of multiple APDs. Further, the comparative analysis aids in designing the best framework for the exterior form of APDs based on human capacity, flying technology, fuel type, travel distance, door type, size, material, safety, cost, etc.

Packaging of potatoes, vegetables and fruits (PVF) currently deals with the fragile opposition of food waste reduction and packaging resource consumption. In order to understand how designers can rethink this always negative balance and outcome of waste creation, research was done to understand packaging and preservation of PVFs from both a technological and consumer perspective. A mixed research approach was applied, including literature study, expert interviews, packaging analyses, consumer survey and photo study. In sum, we concluded that the main function of packaging is preservation, including both protection from outside influences and conservation in best possible conditions. Optimal preservation should consider each PVF's respiration and transpiration needs, and ethylene sensitivity. Consumers are mostly not aware of correct preservation methods. However, on the other hand, their awareness evokes an important tendency to ban plastics without considering their positive impact on food preservation. In the paper, design opportunities are formulated for new reusable packaging, reducing waste creation and offering higher quality in food preservation and consumer experience.

Extant research indicates that Chinese higher education has overlooked creativity. However, based on indirect clues, we infer that the degree of emphasis on creativity and related courses in Chinese higher education has changed. Therefore, we conducted a survey using a questionnaire to compare the creativity-related courses and adopted creativity methods in higher education between China and developed countries. The results indicate that participation rates and assessments of creativity-related courses, adopted creativity methods, and evaluations differ between China and developed countries.

The wearable products market is growing rapidly. Engaging users on an emotional level may be the key to long-term use and attracting new customers. While researchers have proposed various design approaches to realize design qualities for wearable devices, emotional needs are overlooked in the design process. To bridge this gap, we developed an approach with an online tool that uses a two-axis interactive collage for users to compare and evaluate wearable products with targeted emotion-related descriptive words. This approach enabled us to explore how users perceive products and identify types of emotions that were associated with their preferences for and perceptions of the product's form and visible characteristics. The study demonstrated this design approach to reveal insights into the relationships between product characteristics and design goals, such as user comfort, user delight, and perceived product usefulness. The results showed that products that resemble clothes were perceived as more delightful and comfortable. This study suggests that the approach can be further used to explore other design concepts or goals.

Sketching and prototyping are parts of a ‘reflective conversation with materials of a design situation’ (Schön, 1992). To support this conversation, we developed a reflective tool -the Reflection Canvas- that facilitates reflection activities through sketching and prototyping on the one hand and verbalisation on the other. We introduced the reflective tool to design students. Based on observation and answers from a questionnaire data reveal that guided reflection structured the process in a helpful way. It also turned out students had difficulties to switch from visualisation to verbalisation.

This study undertakes a systematic analysis of literature within Circular Economy (CE) in an industrial perspective, with a focus on understanding the consideration of the biological and technological cycles, as well as dual circularity. The paper articulates the key research differences, gaps and trends on the basis of publication evolution, key subject areas, influential journals and keywords co-occurrence mapping. The analysis shows the increasing publication trend with dominance of technological cycle and a wide variety of subject areas incorporated in CE biological, technological and dual cycles. Due to the multidisciplinary and transversal nature of CE, as well as its diverse interpretation and applications, an expansion and consolidation of the subject areas and journals are expected in the years to come. Analysis of co-occurrence on the authors' keywords underlined a limited focus of a business perspective research within the biological cycle, heterogeneous and proactive technological cycle but fragmented research on dual circularity. Further analysis of synergies and limitations is necessary to enhance business effectiveness towards enhanced sustainability.

The tolerancing of products for manufacturing is usually performed at the end of the design process and the responsibility of the designer. Although components are commonly tolerated to ensure functionality, time-based influences, like wear, that occur during operation, are often neglected. This could result in small amounts of scrap after production, but high quantities of failure during operation. To overcome this issue, this paper presents an approach to perform a multi-objective optimization considering tolerances based on a wear simulation. Thereby, mean shifts serve as optimization variables, while the aim of the optimization is to generate an optimal ratio of scrap to failure. In addition, the optimization results are interpreted and further options for the designer are presented. Moreover, the approach is exemplary applied to a use case.

Europe's healthcare systems are under strain with an ageing population contributing to increased risk of strokes. Rapid technology adaption is needed to prevent, rehabilitate and manage symptoms. This paper identifies what technology platforms are most familiar and accessible to stroke patients to guide designers and engineers to develop future interventions. A survey was distributed to 100 inpatients at a stroke unit, identifying patients' accessibility and usage of personal technologies. Results showed that desktop/laptops and smartphones were most used as opposed to tablets and smartwatches. Different technologies were used for different tasks with a notable lack of devices used for personal health. The underlying reasons for this are discussed with recommendations made on what personal technology platforms should be implemented by designers and engineers in technology-based health interventions.

Engineering designers are encouraged to consider relevant contextual factors throughout their design processes. However, specific practices for incorporating context into design processes are lacking in the existing literature, and curricula related to the use of context during design processes is limited. As a preliminary step toward characterizing novice engineering designers' use of contextual factors, we qualitatively coded 10 mechanical engineering capstone design reports for contextual factors; half of the projects had domestic sponsors with varying themes, and the other half of the projects had international sponsors with a global health theme. Our findings showed that teams considered technological and institutional factors most frequently; other factors were considered less frequently. Global health themed design teams considered more contextual factors than non-global health themed teams. There was considerable variability among the contextual factors considered, as well as the stages during which they were considered. These outcomes have the potential to inform the development of pedagogical tools to support the acquisition of skills related to formally addressing context during engineering design processes.

Creativity is crucial in design. In recent years, growing computational methods are applied to improve the creativity of design. This paper aims to explore an approach to generate creative design images with specific feature or design style. A Generative Adversarial Network model is applied in the approach to learn the specific design style. The target products will be projected into the latent space of model to transfer their styles and generate images. The generated images combine the features of the specific design style and the features of the target product. In the experiment, the approach using the generated images to inspire the human designer to generate the creative design in according styles. According to the primary verification by participants, the generated images can bring novelty and surprise to participants, which gain the positive impact on human creativity.

With the broader industrial application of Additive Manufacturing (AM), designers are facing new challenges in conceptual design for AM. To better understand the problematic, the authors organised a design workshop with six experts in AM. The paper presents the results of the conducted design workshop and discusses the current and future trends in research on the conceptual design for AM.

Collaborations between design engineers and bioscientists offer novel opportunities that could help solving some of the biggest challenges organisations and societies are facing. Combining design and bioscience has the potential to create responsible and desirable products/services, however such ventures come with challenges rising from boundaries between practices. This research explores boundary objects as sources of framing in multidisciplinary collaborations. The results are based on a descriptive study with synthetic biologists and design engineers working on an innovation-driven task.

Among 75-90% of residents in Danish nursing homes are diagnosed with dementia. This article explore how a team of five 3rd semester bachelor's design students sought to improve quality of life for elderly people with dementia in a nursing home through a co-design process of a new sensory stimulation technology. Participatory Design researchers agree that it is important to involve diverse actors in the design process such as elderly with dementia, nursing home management, nursing staff etc. But when involving many different actors in designing new products, services and systems the challenge is to navigate the many perspectives and concerns of these actors, which is often conflicting and hence needs negotiating. ‘We draw upon the ANT framework to analyse how ‘matters of concern’ (MoCs) are negotiated and to discuss how designers navigate by staging and facilitating design interactions to support negotiation of MoCs among numerous actors during the design process.

Current development of renewable energy systems (RES) is characterised by an increasing participation of citizens in the upstream decision-making process. These citizens can be future users of the RES but also members of a Renewable Energy Community that develop RES. They can be at the same time Renewable Energy producer, investor and consumer. Moreover, several type of businesses and terms are used to cope with social innovations within the energy sector: local renewable projects, sustainable energy communities or community of renewable energy production. So, actors' engagement opens new solutions for designers who are induced to share alternatives before making decisions. They usually impose constraints since the early phases of the design process. This approach implies for designers to consider new criteria related to citizens motivations and barriers. This paper presents a study to define the main factors that drive people to contribute in social innovation schemes for clean-energy transition. After a state of the art, a survey about 6 main factors and 18 criteria is presented. The analysis based on the responses from 34 participants (i.e. experts) reveals 2 most important factors of motivation and 2 principal barrier sources.

The haptic propositions derived from the textile prototypes often allow for more than one interpretation. It impacts the decision on design alternatives during the phase of design evaluation and validation. The present study aims to conquer this challenge with a haptic design case study of automotive upholstery fabric. It links experimental psychophysics with design decision-making. The study results show that visual cues influence haptic detection accuracy and constancy to choose a final design option.

Transportation industries are the centrepoint for some remarkable transformations driven by technology development and innovation. However, we have seen limited advances on methods to address reliability and resilience challenges emerging with increasingly complex systems and environments. This paper presents the outcomes of an European Reliability Research Roadmapping workshop, collating the views of automotive, aerospace and defence industries to identify current reliability challenges and research gaps and to define directions for future research and skills development.

Generative Design (GD) is a design approach that uses algorithms to generate designs. This paper investigates the role of optimisation algorithms in GD process. We study how Pareto Fronts – a classical optimization algorithm output – help designers to browse the variety associated with a design problem. Thanks to the “splitting condition” from design theory, we show that valuable Pareto Fronts for designers are those that allow the exploration of a variety of design parameters without modifying substantially the performance of the designed solution. We call “Splitting Pareto Front” the Pareto Fronts that display this property and investigate how to generate them. We compare, on an electrical battery design problem, two optimization algorithms – NSGA-II and MAP-Elites – based on the design parameters variety they generate. Our results show that MAP-Elites generates Pareto Fronts that are more splitting than those generated by NSGA-II. We then discuss this result in term of the design process: which algorithm is best suited for which design task? We conclude with the importance for future research on Generative Design Algorithms (GDA) to study jointly the functioning of GDA and their expected contribution to the design process.

The scarce availability of water in highly populated cities is about to become a social problem. While the water service companies work on improving the distribution network in order to reduce losses, it is evident that one of the main problems is due to an excess of use of this resource by users. This consumption is relatively controlled when excessive consumption is clearly associated, in the consumer mind, with high costs. However, when users are in public places they tend to consume water because of a loss of correlation with costs. In this paper, we describe the design of a device to be installed in public environments, which aims to reduce the consumption of water. The device measures in real time the flow of water and sends the user visual and sound information trying to create a link between consumption and costs. The device has been installed in a university campus bathroom and has been tested. Test results show a reduction in water consumption, especially in the interactive prototype approach compared to the conventional treatment. Further modifications for future development of the interactive device is also discussed.

This paper presents a novel method for automatic contradiction detection in requirements engineering using a hybrid approach combining formal logic with Large Language Models (LLMs), specifically GPT-3. Our three-phase process detects contradictions by identifying conditionals and pseudo-grammatical elements, and employing LLMs for nuanced contradiction detection. Tested extensively, including on a real-world electric bus project, our method achieved 99% accuracy and 60% recall. This approach significantly reduces manual effort, enhances quality, and is scalable for future advancements.