Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-23T16:54:50.939Z Has data issue: false hasContentIssue false

Characteristics of N-doped Sb2Te3 Films by X-ray Diffraction and Resistance Measurement for Phase-change Memory

Published online by Cambridge University Press:  01 February 2011

You Yin
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, Kiryu, 376-8515, Japan, +81-277-30-1723, +81-277-30-1707
Naoya Higano
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Kazuhiro Ohta
Affiliation:
[email protected], Gunma University, Department of Electronic Engineering, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Akihira Miyachi
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Masahiro Asai
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Daisuke Niida
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin,, Kiryu, Gunma, 376-8515, Japan
Hayato Sone
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Sumio Hosaka
Affiliation:
[email protected], Gunma University, Department of Nano-Material Systems, 1-5-1 Tenjin, Kiryu, Gunma, 376-8515, Japan
Get access

Abstract

In this paper, characterizations of sputtered undoped and nitrogen-doped Sb2Te3 (ST and STN) films by X-ray diffraction (XRD) and resistance measurements are described and their application of lateral phase-change memory (PCM) is presented. Nitrogen concentration of the films was controlled by changing the flow rate ratio of N2/Ar during sputtering. Resitivity of STN films drops by 3-4 orders of magnitude due to crystallization. Resistivity increase of the STN film (N2/Ar=0.15) at above 270°C results from phase precipitation of SbN. Experimental results reveal that the temperature of crystallization to face-centered cubic (fcc) significantly increases from below 100°C to 160–220°C with increasing the ratio of N2/Ar (in the range of 0–0.15) and crystal structure further transforms from fcc to hexagonal. At high flow rate ratio of N2/Ar (>0.15), hexagonal Te phase firstly appears at 160°C and then orthorhombic SbN appears at 290°C.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lai, S., Lowrey, T., IEDM Tech. Dig. (2001) 803.Google Scholar
2. Yin, Y., Sone, H., Hosaka, S., Jpn. J. Appl. Phys. 45, 8600 (2006).Google Scholar
3. Ovshinsky, S.R., Fritzsche, H., IEEE. Trans. Electron. Dev. 20 (1973) 91.Google Scholar
4. Oh, J.H., Ryu, S.W., Choi, B.J., Choi, S., Hwang, C.S., Kim, H.J., Hwang, S.Y., Kim, Y.J., Park, H.C., Chang, H.Y., Hong, S.K., J. Korean Phys. Soc. 49 (2006) 1173.Google Scholar
5. Yin, Y., Miyachi, A., Niida, D., Sone, H., Hosaka, S.: Jpn. J. Appl. Phys. 45 (2006) 3238.Google Scholar
6. Yin, Y., Miyachi, A., Niida, D., Sone, H., Hosaka, S., Jpn. J. Appl. Phys. 45 (2006) L726.Google Scholar
7. Hosaka, S., Miyauchi, K., Tumura, T., Yin, Y., Sone, H., IEEE Trans. Electron Devices 54, 517 (2007).Google Scholar
8. Yin, Y., Sone, H., Hosaka, S., Jpn. J. Appl. Phys. 45, 4951 (2006).Google Scholar
9. Liu, B., Song, Z., Feng, S., and Chen, B., Microelectronic Engineering 82, 168 (2005).Google Scholar