Because the ability to perform some form of chemical microanalysis has become an essential feature for any microscope, it is necessary to investigate what options are available in the new “ORION” helium ion microscope (HIM). The HIM has the ability to visualize local variations in specimen chemistry in both the ion induced secondary electron and the Rutherford backscattered imaging modes, but this provides only limited and qualitative information. Quantitative, elementally specific, microanalysis could be performed in the HIM using secondary electron spectroscopy, Rutherford backscattered ion spectroscopy, or secondary ion mass spectroscopy, but while each of these options has promise, none of them can presently guarantee either reliable element identification or quantitative analysis across the periodic table.

Aberration correction reduces the depth of field in scanning transmission electron microscopy (STEM) and thus allows three-dimensional (3D) imaging by depth sectioning. This imaging mode offers the potential for sub-Ångstrom lateral resolution and nanometer-scale depth sensitivity. For biological samples, which may be many microns across and where high lateral resolution may not always be needed, optimizing the depth resolution even at the expense of lateral resolution may be desired, aiming to image through thick specimens. Although there has been extensive work examining and optimizing the probe formation in two dimensions, there is less known about the probe shape along the optical axis. Here the probe shape is examined in three dimensions in an attempt to better understand the depth resolution in this mode. Examples are presented of how aberrations change the probe shape in three dimensions, and it is found that off-axial aberrations may need to be considered for focal series of large areas. It is shown that oversized or annular apertures theoretically improve the vertical resolution for 3D imaging of nanoparticles. When imaging nanoparticles of several nanometer size, regular STEM can thereby be optimized such that the vertical full-width at half-maximum approaches that of the aberration-corrected STEM with a standard aperture.

The adsorption of humic acid (HA) onto highly ordered pyrolytic graphite (HOPG) surfaces at different concentrations has been studied by atomic force microscopy. When HA concentration was increased from 10 to 1,000 mg/L, HA can sequentially form spherical particles, layered structures, and connected blocks on HOPG surfaces. The findings of the layer structures and small amount of fine chains have been verified and discussed. When HA was acidified by addition of acetic acid, it changed into small rigid particles. These results indicated that HA can be considered as supramolecular associations of self-assembling heterogeneous and relatively small molecules, and a small amount of polymers. The present results are important for understanding HA molecular structures and their adsorption characteristic on carbonaceous surfaces.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

Following is a list of microscopy-related meetings and courses. The editors would greatly appreciate input to this list via the electronic submission form found in the MSA World-Wide Web page at www.msa.microscopy.com. We will gladly add hypertext links to the notice on the web and insert a listing of the meeting in the next issue of the Journal. Send comments and questions to Nan Yao, [email protected].

Piezoelectric nanoactuators, which can provide extremely stable and reproducible positioning, are rapidly becoming the dominant means for position control in transmission electron microscopy. Here we present a second-generation miniature goniometric nanomanipulation system, which is fully piezo-actuated with ultrafine step size for translation and rotation, programmable, and can be fitted inside a hollowed standard specimen holder for a transmission electron microscope (TEM). The movement range of this miniaturized drive is composed of seven degrees of freedom: three fine translational movements (X, Y, and Z axes), three coarse translational movements along all three axes, and one rotational movement around the X-axis with an integrated angular sensor providing absolute rotation feedback. The new piezoelectric system independently operates as a goniometer inside the TEM goniometer. In situ experiments, such as tomographic tilt without missing wedge and differential tilt between two specimens, are demonstrated.

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

Following is a list of microscopy-related meetings and courses. The editors would greatly appreciate input to this list via the electronic submission form found in the MSA World-Wide Web page at www.msa.microscopy.com. We will gladly add hypertext links to the notice on the web and insert a listing of the meeting in the next issue of the Journal. Send comments and questions to Nan Yao, [email protected].

Following is a list of microscopy-related meetings and courses. The editors would greatly appreciate input to this list via the electronic submission form found in the MSA World-Wide Web page at www.msa.microscopy.com. We will gladly add hypertext links to the notice on the web and insert a listing of the meeting in the next issue of the Journal. Send comments and questions to Nan Yao, [email protected].

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.

The soft X-ray energy range provides important detection capabilities for a wide range of material systems, e.g., the K-edge behavior of biological materials or magnetic contrast imaging at the L2,3- and M4,5-edges, respectively, using the X-ray magnetic circular dichroism effect. The need for thinned samples due to the short penetration depth of soft X-rays is a limiting factor for microscopic imaging in transmission microscopy. In contrast, the more surface sensitive photoelectron emission microscopy allows the X-ray microscopic investigation of nontransparent bulk samples, but only small magnetic fields and very smooth surfaces are possible. As both high magnetic fields as well as bulk samples are important for magnetic imaging, we present total electron yield (TEY) microscopy results using the total sample current detection performed at the new ultra high vacuum scanning microscope “MAXYMUS” at HZB/BESSY II. We compare synchronous measurements in TEY and transmission mode to demonstrate the capabilities of TEY microscopy. Pictures and spectra with high absorption contrast and three-dimensional-like edge enhancement are observed as known for scanning electron microscopy. This unveils details on smallest length scales of the surface morphology. Furthermore, surface sensitive in- and out-of-plane magnetic TEY measurements at nontransparent samples are shown.