Une méthode de synthèse directe de complexes entre un silicate phylliteux et des pigments azoïques a été mise au point. L'étude des complexes obtenus montre que le mécanisme d'interaction entre le feuillet phylliteux et le colorant azoïque fait intervenir des réactions de transfert de charges. On a pu mettre en évidence des phénomènes d'oxydo-réduction et des réactions acide-base. Le mécanisme d'interaction dépend du mode de préparation du complexe. Suivant les conditions de pH du milieu, la fixation du colorant s'effectue soit par une simple ‘précipitation’ dans la structure, soit par échange d'ions. La molécule de colorant subit généralement une protonation au cours de son incorporation avec formation de cations à structure quinonique. La protonation peut se faire soit à partir de protons, cations échangeables du minéral, soit à partir de protons provenant d'une ionisation de groupements structuraux AlMgOH. Le phénomène de protonation apparait prédominant vis-à-vis des réactions d'oxydo-réduction. La présente étude montre également qu'il est difficile de savoir si les phénomènes d'oxydo-réduction ont lieu par l'intermédiaire des atomes d'aluminium ou de fer de la structure ou par des cations Al3+ et de l'alumine eventuellement formés au cours de l'attaque du réseau.

The purpose of this paper is to determine the effect of NaF and firing temperature on the dielectric properties (dielectric constant and dielectric loss) of talc, which is used in the electrical and electronic industries as a circuit element. A detailed characterization of the samples was made by XRD, FTIR, SEM and TG-DTG methods. Dielectric measurements were performed in the frequency range from 1 MHz to 80 MHz at room temperature. The dielectric constant value increased with an increase in firing temperature due to the removal of polarizable compounds from the talc structure. The higher dielectric constant values were obtained by addition of NaF. The dielectric loss of NaF doped talc decreased with the increase of firing temperature and increased with the increase of the amount of NaF.

A genetic classification of clay rocks is given in which five main types are recognized. In this classification minerals of the kaolin group formed directly from hydrothermal solutions, along with sulphides, sulphates, and pneumatogenic minerals, are separated from the same minerals formed by the hydrothermal-metasomatic action of gases and vapours on aluminosilicate rocks. Some data on the occurrence of these two types in Azerbaijan are recorded. The origin of the bentonitic clays (“gilabi”) of Azerbaljan is also discussed; the geology of the deposits indicates cycles of volcanic activity and long-range transport of volcanic ash.

The spectrum of Ni-substituted lizardite, (Mg,Ni)3Si2O5(OH)4, has been discussed by many authors, who have successively given contradictory interpretations concerning the symmetry of the Ni-sites. Lakshman & Reddy (1973) affirmed that in garnierites Ni is in a tetrahedral site. Faye (1974) rejected this conclusion and showed that Ni2+ occupies an octahedral site. However, the Ni … O distance of 2·01 Å which he deduced from the intensity of the crystal field is unacceptable. Recently, using a completely different approach to the interpretation of the spectrum, Cervelle & Maquet (1982) claimed that Ni2+ occupies a six-coordinated site of C3v symmetry, and concluded that the mean Ni … O distance is 2·06 Å.

The aim of this note is to show that it is possible to interpret the spectrum of Ni-lizardite as arising from a predominantly octahedral field with a weak C2v component which provokes a small increase in width of the absorption bands.

The Weissenberg method has been used to study crystalline fragments of hydrobiotites from Stupná near Křemže, Czechoslovakia. The intensity distribution for basal reflections recorded in zero-level photographs indicates that most ‘single crystals’ are nearly regular interstratifications of vermiculite and biotite. Proportions of vermiculite in these interstratifications lie between 12 and 60%.

Two novel modified montmorillonite (Mnt) components were prepared using Mnt nanoparticles and two surfactants: docosyl-trimethylammonium chloride (BTAC) and sodium dodecyl sulfate (SDS). These modified Mnts were used to remove a carcinogenic and harmful dye, crystal violet (CV), from solution. Optimization and modelling studies of the adsorption of these two modified Mnts were performed using response surface methodology. Four influential variables (concentration of adsorbent, temperature, pH and CV concentration) were studied to obtain the optimum conditions for CV removal. The optimal values of these variables for the two modified Mnts yielded 100% dye-removal efficiency. The optimum conditions for CV adsorption on Mnt-BTAC and Mnt-BTAC-SDS, respectively, are temperatures of 25.00 and 33.29°C, pH values of 9 and 10.1, CV concentrations of 50.00 and 10.44 mg L–1 and adsorbent concentrations of 1.00 and 0.98 g L–1. In equilibrium studies of the two modified Mnts, the Temkin isotherm was selected as an appropriate model, and in kinetic studies of these Mnts, the fractal-like integrated kinetics Langmuir model was found to be the best model. The Mnt-BTAC-SDS component is an affordable adsorbent with high adsorption capacity for CV.

The pyroclastic carbonatitic rocks from the Catanda volcanic area (Angola) contain annite and phlogopite grains which have been affected to a significant extent by vermiculitization. A mineralogical study of these micas has revealed that the annite was altered to K-vermiculite while vermiculitization of phlogopite generated Ca-vermiculite. Intermediate alteration products such as intergrowths of phlogopite/Ca-vermiculite were also found, but interstratified crystals of phlogopite/ vermiculite, a common intermediate product during vermiculitization processes, are not reported in the Catanda rocks. The two types of vermiculitized micas show ‘accordion’ textures, related to the expansion of vermiculite. To the authors’ knowledge, the present study is the first report of expanded vermiculites described in natural rocks and not generated as a consequence of industrial processing.

Non-isothermal dehydration kinetics of a heulandite-type zeolite-rich tuff from Turkey was investigated using thermogravimetric data recorded at three different heating rates (5, 10 and 20°C/min) under nitrogen flow. Isoconversional model-free methods gave a constant activation energy over the temperature range 30–200°C suggesting that the dehydration is a single-step process within this temperature range. The apparent activation energy was determined as: 34.54±1.18, 30.99±1.14 and 27.79±1.42 kJ/mol by the Flynn–Wall–Ozawa, the Kissinger–Akahira–Sunose and the Friedman methods, respectively. The activation energy values determined were less than the activation energy for vaporization of bulk water, indicating control of the dehydration rate by diffusion of water within this temperature range.

A Na-montmorillonite (Na-MMT) was activated with HNO3 (20 wt.%) solution at various temperatures and times to obtain acid-activated MMT (Acid-MMT). Zinc (4 wt.%) was supported on Acid-MMT via the impregnation method using Zn(NO3)2⋅6H2O as a precursor. The catalytic performance of the Zn/Acid-MMT for the aromatization of heptane was investigated. The amount and distribution of acidity of Acid-MMT, which could be adjusted by changing the acid activation time and temperature, significantly affected the heptane conversion and aromatics content. As a result, an efficient Zn/Acid-MMT catalyst for the aromatization reaction was obtained by optimizing the acid-treatment conditions of Na-MMT.

The adsorption behaviour of the herbicide clomazone on inorganic and organically modified montmorillonite from the Bogovina deposit in Serbia was investigated. Montmorillonite was modified first with NaCl and then with organic complexes such as hexadecyltrimethylammonium bromide (HDTMA) and phenyltrimethylammonium chloride (PTMA). Changes in the surface properties and morphology of the montmorillonite before and after the modification with various concentrations of organic complexes were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). Adsorption of clomazone on all examined samples was investigated using the batch adsorption method. Montmorillonite modified with HDTMA-bromide displayed greater uptake of the clomazone compared to the PTMA-montmorillonite, and both organically modified montmorillonites displayed greater uptake of the herbicide compared to the inorganic montmorillonite. Comparing the Freundlich coefficient and maximum adsorbed clomazone quantity values obtained by Langmuir model, the levels of adsorption of clomazone decreased in the following order: HDTMA-montmorillonite with 1.00 cation-exchange capacity (CEC) saturation > HDTMA-montmorillonite with 0.75 CEC saturation > PTMA-montmorillonite with 1.00 CEC saturation > PTMA-montmorillonite with 0.75 CEC saturation > HDTMA-montmorillonite with 0.50 CEC saturation > HDTMA-montmorillonite with 0.25 CEC saturation > PTMA-montmorillonite with 0.50 CEC saturation > PTMA-montmorillonite with 0.25 CEC saturation > Na-montmorillonite > raw sample. The type and content of an organic cation plays an important role in the behaviour of clomazone in a solid/liquid system. It is concluded that organically modified montmorillonite from Bogovina might be used as an effective adsorbent for clomazone.

Bernard Kübler measured illite ‘crystallinity’, the half-height width or full width at half maximum (FWHM) of the X-ray diffraction line of illite/mica at 10 Å, directly on the diffraction traces; this procedure has since been followed by the vast majority of workers. However, some workers have recently measured the FWHM of the fitted Pearson VII function rather than on the diffraction traces. The FWHM of this function for low-angle phyllosilicate diffraction peaks (FWHM*PVII) is almost consistently ‘broader’ than those measured directly on the diffraction trace profiles (FWHMtrace) by up to 0.08°Δ2θ for the broader peaks. The Pearson VII function shows gentle curvature (‘smoothing’) at its tops and fast fading of the tails relative to virtually all 10 Å diffraction traces. The broad FWHM*PVII results from the consequent lowering/’under-fitting’ of the peak tops and the upper tails and compensatory broadening/’over-fitting’ of the intermediate peak flanks. FWHM*PVII ‘contraction’ with respect to FWHMtrace and enhancement of the peak maximum is found on traces of muscovite strips. The fitting reliabilities of the Cauchy function are almost invariably better than those of the Pearson VII function. Their FWHM*Cauchy values are narrower for both the illite/mica 10 Å and the chlorite 7 Å reflections; although they still differ somewhat from the FWHMtrace, they are much closer, usually within 0.02°Δ2θ. This markedly lesser broadening of FWHM* of the Cauchy of the Pearson VII function is the result of its stronger top curvature and notably faster tail fading (less ‘smoothening’). For higher-angle mica peaks, the FWHM* values of the Pearson VII and Cauchy functions converge, usually differing only by 0.01–0.03°Δ2θ for the 5 Å peak, and even less for the 3.3 Å peak. It is therefore strongly recommended that FWHM values of the illite/mica 10 Å reflections be measured on the diffraction traces rather than on fitted functions. Where peak fitting is unavoidable (e.g. in order to separate the contributions of adjoining, partly resolved or unresolved reflections on broadened 10 Å reflections), Cauchy rather than Pearson VII functions should be used.

Clays have been used widely as sorbents of potentially toxic elements, especially Pb. However, their adsorption efficiency has been studied mostly under static experimental conditions, which are labour-intensive. In this study, dynamic adsorption experiments were established using micro-columns to assess the adsorption behaviour of natural Fe-Mg-rich clays for Pb ions by varying the inlet solution pH, Pb concentration and flow rate. The clays, consisting of varying amounts of palygorskite and Fe-smectite, were diluted with quartz (Qz) sand to enhance their permeability. Greater adsorption capacity was observed for the mixed palygorskite/Fe-smectite-rich clay beds (45.2 ± 0.01 mg g–1) followed by the Fe-smectite-rich (35.7 ± 0.07 mg g–1) and palygorskite-rich (20.0 ± 0.03 mg g–1) clay beds. The results indicated that the greater adsorption efficiency of palygorskite/Fe-smectite-rich clays could be attributed to synergistic effects due to the coexistence of palygorskite and Fe-smectite clay phases, which have distinct physicochemical characteristics. Moreover, the results obtained showed good agreement with the static experiments, implying that the use of micro-columns could describe adsorption adequately over shorter experimental times.

High-whiteness kaolinite mining reserves are scarce. In some locations, it is necessary to remove material to access them (adding to the cost). Therefore, processes have been developed to eliminate contaminants, such as iron, and provide alternatives to the used contaminated materials that, after being treated, meet quality criteria. In our previous research, we developed an electrochemical process for kaolin whitening at the laboratory level and bench scale, demonstrating the reaction mechanisms that occur during the removal of iron from kaolin. However, the geometry used at the laboratory level does not present the most suitable position for the electrodes. Therefore, in the present study, we focused on the geometry and the function of the electrodes. This is necessary during the escalation process to reach the pilot-scale level. The study was carried out using computer-aided engineering in the COMSOL Multiphysics computer program and by analysing the distribution of the electric potential and the electric current of the geometries considered while performing the scaling. The results indicated that the change in the anode position from perpendicular to parallel to the discs improved the distribution of electric current density on the cathode surface and so increased the elimination of iron through electrochemical deposition. Similarly, to reduce the amount of material used in the construction of the reactor, the anode-size effect was analysed, revealing that relatively small anodes improved the distribution of electric current density over the entire surface of the electrode and not only at the edges.