Two parallel schemes of crosses were practised involving the Spanish maternal line called V-line (V) and Saudi Gabali (S) rabbits. The first scheme began by crossing Saudi Gabali bucks with V-line does to get the F1 cross (½S½V), then does of this F1 were backcrossed with bucks of V-line to get ¾V¼S, then the progenies of the backcross were inter se mated to get (¾V¼S)2, followed by two more generations of inter se mating of (¾V¼S)2 to get a new synthetic maternal line named Saudi 2. The second scheme began by crossing V-line bucks with Saudi does to get the F1 cross (½V½S), then does of this F1 cross were backcrossed with Saudi bucks to get ½S½V, then progeny of this backcross were inter se mated to get (¾S¼V)2, followed by two generations of inter se mating of (¾S¼V)2 to form a new synthetic paternal line named Saudi 3. A generalised least-square procedure was used to estimate differences between lines in direct and maternal additive effects, direct and maternal heterosis, and direct recombination losses. A total number of 2497 ejaculates of 642 bucks were evaluated for ejaculate volume (VE), pH of semen, sperm concentration (SC), percentage of motile spermatozoa (MS), percentage of spermatozoa with abnormal form (AS), percentage of dead spermatozoa (DS) and libido score (LS). The estimates of direct additive effect for DS (14.2%), SC (12.4%) and AS (12.0%) were moderate and favourable to Saudi rabbits. Maternal additive effects for VE (11.7%) were in favour of genes of V-line carried by the dams of bucks, while these estimates were in favour of Saudi genes for DS (18.6%), AS (13.2%), MS (10.8%) and SC (10.0%). Positive estimates of direct heterosis recorded for SC (13.5%), VE (10.6%) and MS (10.5%) and the negative estimates recorded for AS (−21.5%) and DS (−20.3%) were moderate and well disposed to semen parameters of crossbred bucks. Positive estimates of maternal heterosis for VE (24.0%), MS (21.8%), SC (10.3%) and LS (10.2%) of bucks, and the negative estimates for percentage of DS (−14.7%) and AS (−9.6%) were also significantly favourable. Estimates of direct recombination losses for the majority of semen traits were always not significant.

Serial measurements of three milkability traits from two commercial dairy farms in Germany were used to estimate heritabilities and breeding values (BVs). Overall, 6352 cows in first, second and third lactations supplied 2 188 810 records based on daily values recorded from 1998 to 2003. Only the records between day 8 and day 305 after calving were considered. The estimated genetic correlations between different parities within the three milkability traits ranged from rg = 0.88 to 0.98, i.e. they were sufficiently high to warrant a repeatability model. The resulting estimated heritability coefficients were h2 = 0.42 for average milk flow, h2 = 0.56 for maximum milk flow and h2 = 0.38 for milking time. We analysed the genetic correlation between milkability and somatic cell score (SCS) and between milkability and the liability to mastitis, respectively, as the optimum milk flow for udder health is not well defined. There were 66 146 records with information on somatic cell count. Furthermore, 23 488 days of medical treatment for udder diseases were available, resulting in 2 600 302 days of observation in total. Heritabilities for the liability to mastitis, estimated with a test-day threshold model, were h2 = 0.19 and h2 = 0.13, depending on the data-recording period (first 50 days of lactation and first 305 days of lactation, respectively). With respect to the relationship between milkability and udder health, the results indicated a slight and linear correlation insofar as one can assume: the higher the milk flow, the worse the udder health. For this reason, bulls and cows with high BVs for milk flow should be excluded from breeding to avoid a deterioration of udder health. The establishment of a special data-recording scheme for functional traits such as milkability and mastitis on commercial dairy farms may be possible according to these results.

In a stochastic simulation study the effect of simultaneously changing the model for prediction of breeding values and changing the breeding goal was studied. A population of 100 000 cows with registrations on seven traits was simulated in two steps. In the first step of 15 years the population was selected for production and mastitis occurrence using a univariate model for prediction of breeding values for production and a trivariate model using information on mastitis treatments, udder depth and somatic cell score for prediction of breeding values for mastitis occurrence. In the second step six different scenarios were set up and simulated for 15 years combining two different breeding goals and three different models for prediction of breeding values in 20 replicates. Breeding goal 1 had relative economic value per genetic standard deviation on production (19.4) and mastitis occurrence ( − 50) whereas breeding goal 2 had a economic value on production (19.4), udder depth (4.2), mastitis occurrence ( − 50), non return rate (13.0) and days open ( − 16.75). Model 1 was a model similar to the one used in the first 15 years. Model 2 was an approximate multitrait model where solutions for fixed effects from a model corresponding to model 1 were subtracted from the phenotypes and a multitrait model with an overall mean, a year effect, an additive genetic and a residual effect were applied. Model 3 was a full multitrait model. Average genetic trends for total merit and each individual trait over 20 replicates were compared for each scenario. With the number of replicates the genetic responses using model 2 and 3 were not significant different. With a broad breeding goal using, model 2 or model 3 gave a significantly higher response in total merit than using model 1. Using a narrow breeding goal there was no significant difference between models used for prediction of breeding values. Results showed that with a breeding goal with a lot of emphasis on low heritable traits with a high economic value using a multitrait methodology for prediction of breeding values will redistribute the genetic progress in the total merit index. More gain will come from the low heritable traits in the breeding goal and less from traits with higher heritability. With a broad breeding goal and exploiting the available information in the data the inbreeding coefficient increased though not significantly.

The genetic relationships of five Indian horse breeds, namely Marwari, Spiti, Bhutia, Manipuri and Zanskari were studied using microsatellite markers. The DNA samples of 189 horses of these breeds were amplified by polymerase chain reaction using 25 microsatellite loci. The total number of alleles varied from five to 10 with a mean heterozygosity of 0.58 ± 0.05. Spiti and Zansakari were the most closely related breeds, whereas, Marwari and Manipuri were most distant apart with Nei's DA genetic distance of 0.071 and 0.186, respectively. In a Nei's DA genetic distances based neighbour joining dendrogram of these breeds and a Thoroughbred horse outgroup, the four pony breeds of Spiti, Bhutia, Manipuri and Zanskari clustered together and then with the Marwari breed. All the Indian breeds clustered independently from Thoroughbreds. The genetic relationships of Indian horse breeds to each other correspond to their geographical/environmental distribution.

The objective of the study was to determine genetic parameters for growth and carcass traits in Mukota pigs, maintained on a fibrous diet. Records (n = 1961) were obtained from a population housed at the University of Zimbabwe Farm (Harare, Zimbabwe) between January 1998 and August 2003. Backfat thickness was measured at 50 and 75 mm (K5 and K7.5), respectively. Carcass length (CL) was measured from the anterior edge of the first rib to the pubic bone using a measuring tape. Variance components were estimated using a model that accounted for direct, common environmental litter and maternal genetic effects, using average information restricted maximum likelihood. Heritability estimates for average daily gain from birth to weaning (ADGW) and average daily gain from weaning to 12 weeks (ADG1) were 0.15 and 0.27, respectively. Maternal genetic effects accounted for 2.6% of variation for ADG1. Heritability for average daily gain from 12 weeks to slaughter (ADG2) was 0.20. Common environmental litter effects accounted for 18% of phenotypic variance for cold dressed mass (CDM). Heritability estimates for CDM and CL were 0.32 and 0.62, respectively. Maternal genetic effects accounted for 10.5% of variance in CL. Heritability estimates for K5 and K7.5 were 0.64 and 0.40, respectively. The CDM was positively genetically correlated to K5, but negative to K7.5. The K5 and K7.5 had a high genetic correlation (0.88). Genetic correlations between ADGW and K5, K7.5 and CL were 0.30, 0.05 and 0.35, respectively. The existence of sufficient genetic variation makes genetic improvement for many growth and carcass traits in the Mukota breed possible through effective selection methods.

Myostatin (MSTN), a member of the transforming growth factor-β superfamily, has been shown to be a negative regulator of myogenesis. Natural mutation in beef cattle causes double-muscling phenotypes. We report an investigation designed to knockout the MSTN gene by gene targeting in ovine myoblast cells. Two promoter-trap targeting vectors MSTN-green fluorescent protein (GFP) and MSTN-neo were constructed and used to transfect foetal and neonatal ovine primary myoblast cells. Both GFP-expressing cells and drug-resistant cells were obtained. Targeted cells expressing GFP were confirmed by polymerase chain reaction (PCR) assay and drug-resistant cells were characterised by PCR and Southern blot after growing into cell clones.

In order to evaluate the genotype of the calpastatin (CAST) gene and its relationship to muscle histology and other post mortem traits in the Jinhua × Piétrain F2 pig family, 158 barrows and gilts were electrically stunned and exsanguinated. Both blood and muscle samples were collected, and both post mortem traits and meat qualities were recorded. Restriction fragment length polymorphism (RFLP) analysis, the periodic acid Schiff reaction (PAS) and myosin heavy-chain immunohistochemistry were employed to explore the relationship between genotype and muscle histology. Based on PAS reactivity, muscle fibres can be classified into three types: PAS (−), PAS (+) and PAS (++). Myosin heavy-chain immunohistochemistry can differentiate muscle fibres into either slow or fast fibres; the proportion of slow and fast fibres were 6% and 94%, respectively. When the amplification products of the CAST gene were digested with MspI, HinfI and RsaI, two different cleavage patterns could be discriminated from the endonuclease map detected using each enzyme. The results showed that the polymorphisms detected using these three endonucleases are identical. Only three genotypes (AA/CC/EE, AB/CD/EF and BB/DD/FF) were distinguished. Their frequencies were 0.1835, 0.5823 and 0.2342, respectively. Different genotypes had significant association with area and pH45m value of loin muscle, while showing no significant association with the water-holding capacity and conductivity of loin muscle. The results also revealed that the genotypes had a significant correlation with diameter, area, circularity and the aspect ratio of muscle fibres. It was also presented that the genotypes significantly correlated with the percentage of intramuscular connective tissue.

An evolutionary algorithm was applied to a mechanistic model of the mammary gland to find the parameter values that minimised the difference between predicted and actual lactation curves of milk yields in New Zealand Jersey cattle managed at different feeding levels. The effect of feeding level, genetic merit, body condition score at parturition and age on total lactation yields of milk, fat and protein, days in milk, live weight and evolutionary algorithm derived mammary gland parameters was then determined using a multiple regression model. The mechanistic model of the mammary gland was able to fit lactation curves that corresponded to actual lactation curves with a high degree of accuracy. The senescence rate of quiescent (inactive) alveoli was highest at the very low feeding level. The active alveoli population at peak lactation was highest at very low feeding levels, but lower nutritional status at this feeding level prevented high milk yields from being achieved. Genetic merit had a significant linear effect on the active alveoli population at peak and mid to late lactation, with higher values in animals, which had higher breeding values for milk yields. A type of genetic merit × feeding level scaling effect was observed for total yields of milk and fat, and total number of alveoli produced from conception until the end of lactation with the benefits of increases in genetic merit being greater at high feeding levels. A genetic merit × age scaling effect was observed for total lactation protein yields. Initial rates of differentiation of progenitor cells declined with age. Production levels of alveoli from conception to the end of lactation were lowest in 5- to 8-year-old animals; however, in these older animals, quiescent alveoli were reactivated more frequently. The active alveoli population at peak lactation and rates of active alveoli proceeding to quiescence were highest in animals of intermediate body condition scores of 4.0 to 5.0. The results illustrate the potential uses of a mechanistic model of the mammary gland to fit a lactation curve and to quantify the effects of feeding level, genetic merit, body condition score, and age on mammary gland dynamics throughout lactation.

Data from 2032 Uruguayan Aberdeen Angus cows under extensive management and recording practices were analysed with Bayesian threshold-liability sire models, to assess genetic variability in calving success (CS), defined as a different binary trait for each of the second (CS2), third (CS3) and fourth (CS4) calving opportunities. Sire (herd) variances ranged from 0.08 to 0.11 (0.10 to 0.20) and heritability from 0.27 to 0.35, with large credibility intervals. Correlations between herd effects on CS at different calving opportunities were positive. Genetic correlation between CS2 and CS4 was positive (0.68), whereas those involving adjacent calving opportunities (CS2–CS3 and CS3–CS4) were negative, at −0.39 and −0.54, respectively. The residual correlation CS2–CS3 was negative (−0.32). The extent of uncertainty associated with the posterior estimates of the parameters was further evaluated through simulation, assuming different true values (−0.4, −0.2, +0.2 and +0.4) for the genetic correlations and changes in the degree of belief parameters of the inverse Wishart priors for the sire covariance matrix. Although inferences were not sharp enough, CS appears to be moderately heritable. The quality of data recording should be improved, in order to effect genetic improvement in female fertility.

‘ANIMAL – An International Journal of Animal Bioscience’ is the central element in a new and exciting collaborative venture between the European Federation for Animal Science (EAAP), Institut National de la Recherche Agronomique (INRA), and British Society of Animal Science (BSAS). It merges three high-quality and successful journals (Animal Science, Animal Research and Reproduction, Nutrition, Development) into a single forward-looking publication that will reduce fragmentation in the sector, improve synergies and, we hope, act as a catalyst for integrating process-level and systems science in the animal biosciences.

Mechanistic animal growth models can incorporate a description of the genotype as represented by underlying biological traits that aim to specify the animal's genetic potential for performance, independent from the environmental factors captured by the models. It can be argued that these traits may therefore be more closely associated to genetic potential, or components of genetic merit that are more robust across environments, than the environmentally dependent phenotypic traits currently used for genetic evaluation. The prediction of merit for underlying biological traits can be valuable for breeding and development of selection strategies across environments.

Model inversion has been identified as a valid method for obtaining estimates of phenotypic and genetic components of the biological traits representing the genotype in the mechanistic model. The present study shows how these estimates were obtained for two existing pig breeds based on genetic and phenotypic components of existing performance trait records. Some of the resulting parameter estimates associated with each breed differ substantially, implying that the genetic differences between the breeds are represented in the underlying biological traits. The estimated heritabilities for the genetic potentials for growth, carcass composition and feed efficiency as represented by biological traits exceed the heritability estimates of related phenotypic traits that are currently used in evaluation processes for both breeds. The estimated heritabilities for maintenance energy requirements are however relatively small, suggesting that traits associated with basic survival processes have low heritability, provided that maintenance processes are appropriately represented by the model.

The results of this study suggest that mechanistic animal growth models can be useful to animal breeding through the introduction of new biological traits that are less influenced by environmental factors than phenotypic traits currently used. Potential value comes from the estimation of underlying biological trait components and the explicit description of their expression across a range of environments as predicted by the model equations.

A total of 19 376 test day (TD) milk yield records from the first three lactations of 1618 cows daughters of 162 sires were used to estimate genetic and phenotypic parameters and determine the relationship between daily milk yield and lactation milk yield in the Sahiwal cattle in Kenya. Variance components were estimated using animal models based on a derivative free restricted maximum likelihood procedure. Variance components were estimated using various univariate and multi-trait fixed regression test day models (TDM) that defined contemporary groups either based on the year-season of calving (YSCV) or on the year-season of TD milk sampling (YSTD). Variance components were influenced by CG which resulted in differences in heritability and repeatability estimates between TDM. Models considering YSTD resulted in higher additive genetic variances and lower residual variances compared with models in which YSCV was considered. Heritability estimates for daily yield ranged from 0.28 to 0.46, 0.38 to 0.52 and 0.33 to 0.52 in the first, second and third lactation, respectively. In the first and second lactation, the heritability estimates were highest between TD 2 and TD 4. Genetic correlations among daily milk yields ranged from 0.41 to 0.93, 0.50 to 0.83 and 0.43 to 86 in the first, second and third lactation, respectively. The phenotypic correlations were correspondingly lower. Genetic correlations were different from unit when fitting multi-trait TDM. Therefore, a multiple trait model would be more ideal in determining the genetic merit of dairy sires and bulls based on daily yield records. Genetic and phenotypic correlations between daily yield and lactation yields were high and positive. Genetic correlations ranged from 0.84 to 0.99, 0.94 to 1.00 and 0.94 to 0.97 in the first, second and third lactations, respectively. The corresponding phenotypic correlation estimates ranged from 0.50 to 0.85, 0.50 to 0.83 and 0.53 to 0.87. The high genetic correlation between daily yield and lactation yield imply that both traits are influenced by similar genes. Therefore daily yields records could be used in genetic evaluation in the Sahiwal cattle breeding programme.

A promising tool to improve daily gain in pigs is the missense mutation (Asp298Asn) in the melanocortin-4 receptor (MC4R) gene, especially in the Belgian pig industry where the slow-growing Piétrain breed is very frequently used as the sire breed. The MC4R is expressed in the appetite-regulating region of the brain where it regulates feed intake and energy balance. The mutation has been associated with differences in fatness, daily gain and feed intake. However, less information on the correlated effects on meat quality is available. In order to evaluate the influence of the MC4R mutation on carcass and meat quality parameters, a total of 1155 pigs of a four-way cross were slaughtered at an average live weight of 109 kg, and data about daily live-weight gain, carcass and meat quality were collected. Allelic frequencies were 0.69 for the G-allele (298Asp variant or well-conserved variant) and 0.31 for the A-allele (298Asn variant or the mutated variant). Barrows and gilts were almost equally distributed in this population with, respectively, 49.9% and 50.1%. Moreover, independent of this mutation, the relationship between average daily gain (ADG) and carcass on the one hand and meat quality traits on the other hand was evaluated in this population. A significant positive influence of the MC4R mutation on ADG (P < 0.001) was found, accompanied by a higher fat thickness (P < 0.05) and a lower carcass lean meat content (P < 0.01), whereas muscle thickness and carcass conformation traits were not affected. The effects on meat quality traits were not significant, except for a lower shear force (P = 0.054) and a higher intramuscular fat content (P = 0.052) in AA animals. In the longissimus, pH and pork quality meter (PQM) values were not influenced, and effects on drip loss and colour were not apparent. Residual correlation coefficients between ADG and carcass lean meat content on the one hand and meat quality traits on the other hand were generally very low (|r|>0.1). Higher ADG, higher carcass fat thickness and lower carcass lean meat content were correlated with slightly lower shear force values (|r|∼0.1, P < 0.05). In conclusion, in the studied population, the Asp298Asn mutation in the MC4R gene was associated with improved daily gain, higher carcass fatness and almost no effect on meat quality traits.

Genetic trends for body composition and blood plasma parameters of newborn piglets were estimated through the comparison of two groups of pigs (G77 and G98, respectively) produced by inseminating Large White (LW) sows with semen from LW boars born either in 1977 or in 1998. Random samples of 18 G77 and 19 G98 newborn piglets were used for whole carcass and tissue sampling. Plasma concentrations of glucose, albumin and IGF-1 were determined on 75 G77 and 90 G98 piglets from 18 litters. The G98 piglets had less carcass dry matter, protein and energy (P < 0.01) than their G77 counterparts. When expressed in g/kg birth weight, livers were lighter (P < 0.001) and contained less glycogen (P < 0.01) in G98 piglets, with no difference in the activity of the hepatic glucose-6-phosphatase between G98 and G77 piglets. Concentrations of protein, DNA, RNA in longissimus dorsi muscle were unaffected by selection. Plasma concentrations of glucose (P < 0.05) and IGF-1 (P < 0.01) were lower in G98 than in G77 piglets. On the whole, the results suggest that the improvement in lean growth rate and in sow prolificacy from 1977 to 1998 has resulted in a lower maturity of piglets at birth.

The objective of the study was to estimate genetic trends from 1977 to 1998 in the French Large White (LW) breed for stillbirth and associated traits measured at farrowing using frozen semen. Two groups of pigs (G77 and G98) were obtained by inseminating LW sows with semen from LW boars born either in 1977 or in 1998. A second generation was produced by inter se mating in each group. Farrowing was thoroughly supervised through both direct observations and video recording all long farrowing on a total of 137 first- and second-parity litters produced by sows from this second generation (68 G77 and 69 G98 litters, respectively). Measurements included birth time, weight and birth characteristics (including orientation, presence of cyanosis or oedema, membrane obstruction, umbilical cord length/content) of each piglet, as well as sow traits (weight and backfat thickness, farrowing duration, litter size and within-litter variation of weights at birth). The data were analysed using linear or generalised linear mixed models, according to the definition of the trait (continuous or binary data). The importance of several effects to piglet probability of stillbirth was then quantified by computing the reduction of variance associated with the addition of each effect in the model. Litter size did not significantly differ in first parity, but was higher in G98 second-parity sows: the differences for global (including pre partum dead piglets) and total numbers of piglets born per litter were +2.3 ± 1.1 and +1.3 ± 0.6, respectively. G98 sows also had a higher number of stillbirths in both parities (+0.7 ± 0.3 stillborn per litter). Piglets from G98 litters were heavier at birth (+130 ± 40 g for birth weight adjusted for litter size), without any increase in within-litter heterogeneity of birth weight. No significant difference was detected between G77 and G88 groups for farrowing length and the distribution of time interval between piglet births. G98 stillborn piglets had longer and more often empty umbilical cords at birth. G98 piglets born alive also had more often umbilical nodes than G77 piglets. These characteristics were considered as indicators of increased farrowing difficulties and risk of hypoxia at birth in G98 pigs. Time of birth of each piglet, sow fatness at farrowing and time of first placenta expulsion were the main factors of variation of the piglet’s probability of stillbirth.

Phenotypic information about several pig meat quality traits on 334 Large White × Meishan F2 pigs was collected. Effects of the association of the FokI variants in the seventh intron of the skeletal muscle glycogen synthase (GYS1) gene and the PstI variants in the ninth intron of the palmitoyl acyl-CoA oxidase 1 (ACOX1) gene on the meat quality traits were examined on all pigs. The FokI variants of the GYS1 gene showed significant effects on pH of m. semipinalis capitis (P < 0.05). Linkage analysis indicated that the peak of the quantitative trait loci (QTL) curve was located around this marker for pH, but it did not reach significance (P > 0.05). The results may be due to several reasons such as linkage disequilibrium to the causal mutations, the limited number of animals or balance of another QTL or marker with negative effects. Significant effects of PstI variants of ACOX1 gene were also found on meat colour value and meat marbling score of both m. longissimus dorsi and m. biceps femoris (P < 0.05). Dominant effects for the affected traits at those two loci were significant except for meat marbling score of m. biceps femoris (P < 0.05). The results of this study give us some evidence for the potential of those dominant markers used in the marker-assisted selection of crossbreeding of the Large White pig sire lines and Meishan-derived synthetic dam lines.

This paper describes an investigation of the use of computer tomography (CT) to genetically improve carcass composition and conformation in Scottish Blackface sheep. After 5 years of selection on an index designed to improve both composition and conformation (the ‘CT index’), a large response was observed in the CT index, with genetic progress equivalent to 0.11 phenotypic standard deviations per year. Heritabilities for the index and for the component traits of average CT-assessed muscle area, ultrasonic muscle depth and ultrasonic fat depth were 0.41 (s.e. 0.08), 0.38 (s.e. 0.07), 0.41 (s.e. 0.05) and 0.30 (s.e. 0.05), respectively. The index was positively genetically correlated with ultrasonic muscle depth and carcass weight and negatively genetically correlated with fat class. The genetic and phenotypic correlations among ultrasonic measurements were positive and moderate. However, many of the genetic correlations tended to have large standard errors. Selection on the CT index moderately improved conformation and was successful at decreasing fat class of the carcass. Equivalent selection on live weight at ultrasound scanning would improve carcass and slaughter weight, and total price received, but would have a slightly deleterious impact on conformation score. The results of this study demonstrate that genetic improvement of carcass quality can be achieved in hill sheep using CT assessed traits.

Birth weight plays a central role in lamb survival and growth, and the knowledge of its genetic determinism has become essential in worldwide selection programmes. Within this context, within-litter birth weight variation (BWV) has been suggested as an attractive trait to homogenise litters in prolific species, although it has not been analysed in sheep. The objective of this study was to ascertain whether maternal additive genetic variance exists for BWV in Ripollesa ewes, and to study its genetic, permanent environmental and residual relationships with litter weight (LW) and litter size (LS) at birth. Data were recorded in the Ripollesa experimental flock of the Universitat Autònoma of Barcelona, between 1986 and 2005, and included 1 662 litters from 380 ewes, with 712 records of BWV and 1 530 records of LW. Traits were analysed with a multivariate animal model solved through Bayesian methodologies, and with a threshold characterisation of LS. Additionally, the effect of BWV on lamb survival was studied. Additive genetic variance was observed for BWV (h2 = 0.061), as well as for LW (h2 = 0.200) and LS (h2 = 0.141). Nevertheless, genetic correlations among those traits were not substantial (BWV and LW = 0.151; BWV and LS = − 0.219; LW and LS = − 0.320) and suffered from a high degree of uncertainly, with the null correlation included within the highest posterior interval at 95%. Within-litter birth weight variation and LS showed a negative and large permanent environmental correlation ( − 0.872), and LW and LS were negatively correlated due to residual ( − 0.762) and permanent environmental ( − 0.449) random sources of variation. Within-litter birth weight variation influenced lamb mortality during the first 7 days of life (P < 0.05), increasing and decreasing survivability in heavier and lighter littermates, respectively. Nevertheless, stillbirths and lambs died after the 1st week of life were not affected by BWV (P>0.05). The low heritability found indicates that slow genetic progress may be expected from selecting for BWV. Close to zero genetic correlations suggest that this selection will probably not affect LS and LW, although some significant permanent and residual correlations must be taken into account. Further studies are needed to understand better the genetic architecture among these three reproductive traits.

The objective was to reduce the incidence of liver abscesses (LAs) in young bulls by reducing the starch content of the concentrate and increasing the straw intake by adding molasses without reducing performance. Eighty-five Danish Friesian bulls (146 ± 2.6 kg live weight (LW)) were allocated to four treatment groups in a 2 × 2 factorial design and were ad libitum fed either a high (H) (43%) or a low (L) (25%) starch concentrate, and either chopped barley straw (S) or a mixture (Sm) of chopped barley straw and sugar-beet molasses (75:25). The bulls were slaughtered at 440 (±4.2) kg LW (11.3 months of age) on average. The concentrate dry-matter intake (DMI) was 7.5% higher (P < 0.001), the roughage DMI was 12% higher (P < 0.01), whereas the total net energy intake was 7% lower (P < 0.001) for the L compared with the H concentrate. By adding molasses to the straw, roughage DMI increased from 0.50 to 0.96 kg/day (P < 0.001). Average daily gain (ADG) was not affected by treatment. Feed conversion efficiency (FCE) for dry matter (FCEDM) was decreased (P < 0.001), whereas FCE for net energy (FCENE) was increased with the L concentrate (P < 0.01), suggesting a lower utilisation of the cell wall fraction with the H starch concentrate. There were no major effects of treatment on carcass characteristics. The higher roughage intake with Sm prevented rumen wall damage, but did not reduce the number of animals with LAs. The L concentrate did not affect the rumen wall but reduced the level of LA (2 v. 9 animals, P < 0.02). There was a higher level of respiratory diseases in animals fed the H concentrate (P < 0.05). The experiment showed that it was possible to maintain performance and reduce LA by using a lower starch content of the concentrate.

Covariance components for test day milk yield using 263 390 first lactation records of 32 448 Holstein cows were estimated using random regression animal models by restricted maximum likelihood. Three functions were used to adjust the lactation curve: the five-parameter logarithmic Ali and Schaeffer function (AS), the three-parameter exponential Wilmink function in its standard form (W) and in a modified form (W*), by reducing the range of covariate, and the combination of Legendre polynomial and W (LEG+W). Heterogeneous residual variance (RV) for different classes (4 and 29) of days in milk was considered in adjusting the functions. Estimates of RV were quite similar, rating from 4.15 to 5.29 kg2. Heritability estimates for AS (0.29 to 0.42), LEG+W (0.28 to 0.42) and W* (0.33 to 0.40) were similar, but heritability estimates used W (0.25 to 0.65) were highest than those estimated by the other functions, particularly at the end of lactation. Genetic correlations between milk yield on consecutive test days were close to unity, but decreased as the interval between test days increased. The AS function with homogeneous RV model had the best fit among those evaluated.