For the success of PAL-XFEL, two critical systems, namely a low emittance injector and a variable gap out-vacuum undulator, are under development. In order to realize the target emittance of the PAL-XFEL injector we carried out an optimization study of various parameters, such as the laser beam transverse profile, the laser pulse length, the laser phase, and the gun energy. The transverse emittance measured at the Injector Test Facility (ITF) is ${\it\varepsilon}_{x}=0.48\pm 0.01~\text{mm}~\text{mrad}$. An undulator prototype based on the EU-XFEL design and modified for PAL-XFEL was built and tested. A local-$K$ pole tuning procedure was developed and tested. A significant reduction (90%) of the local-$K$ fluctuation was observed. The requirement of undulator field reproducibility better than $2\times 10^{-4}$ and the undulator gap setting accuracy below $1~{\rm\mu}\text{m}$ were achieved for the prototype. The optical phase jitter after the pole height tuning at the tuning gap was calculated to be $2.6^{\circ }$ rms, which satisfies the requirement of $5.0^{\circ }$.

FLASH at DESY, Hamburg, Germany is the first free-electron laser (FEL) operating in the extreme ultraviolet (EUV) and soft x-ray wavelength range. FLASH is a user facility providing femtosecond short pulses with an unprecedented peak and average brilliance, opening new scientific opportunities in many disciplines. The first call for user experiments has been launched in 2005. The FLASH linear accelerator is based on TESLA superconducting technology, providing several thousands of photon pulses per second to user experiments. Probing femtosecond-scale dynamics in atomic and molecular reactions using, for instance, a combination of x-ray and optical pulses in a pump and probe arrangement, as well as single-shot diffraction imaging of biological objects and molecules, are typical experiments performed at the facility. We give an overview of the FLASH facility, and describe the basic principles of the accelerator. Recently, FLASH has been extended by a second undulator beamline (FLASH2) operated in parallel to the first beamline, extending the capacity of the facility by a factor of two.

The problem of energy recuperator for a high current sheet electron beam used to drive a millimeter-waves generator is considered. There are two main obstacles to solving the problem. The first one is the presence of a magnetic field guiding beam electrons. The second obstacle is significant energy and angular spreads of the electrons in the waste beam. To overcome these obstacles, we suggest a novel scheme of a recuperator. The main idea of the proposed scheme is the use of a decelerating electrical field together with a guiding magnetic field that has longitudinal and spatial periodic transverse components. Resonance of a bounce electron motion with the cyclotron motion in this field gives a strong increase in the Larmour radius of electrons with the energy in a narrow interval. The decelerated electrons with the resonance energy fall away from the beam and are absorbed by a collector at a proper potential. It is shown that efficiency of this novel scheme can reach about 80% even if the sheet beam has a broad energy spectrum.