Atom probe tomography (APT) analysis conditions play a major role in the composition measurement accuracy. Preferential evaporation (PE), which significantly biases the apparent composition, more than other well-known phenomena in APT, is strongly connected to those analysis conditions. One way to optimize them, in order to have the most accurate measurement, is therefore to be able to predict and then to estimate their influence on the apparent composition. An analytical model is proposed to quantify the PE. This model is applied to three different alloys such as NiCu, FeCrNi, and FeCu. The model explains not only the analysis temperature dependence, as in an already existing model, but also the dependence to the pulse fraction and the pulse frequency. Moreover, the model can also provide an energetic constant directly linked to the energy barrier required to field evaporate atom from the sample surface.

The effects of varying the pulse energy of a picosecond laser used in the pulsed-laser atom-probe (PLAP) tomography of an as-quenched Ni-6.5 Al-9.5 Cr at.% alloy are assessed based on the quality of the mass spectra and the compositional accuracy of the technique. Compared to pulsed-voltage atom-probe tomography, PLAP tomography improves mass resolving power, decreases noise levels, and improves compositional accuracy. Experimental evidence suggests that Ni2+, Al2+, and Cr2+ ions are formed primarily by a thermally activated evaporation process, and not by post-ionization of the ions in the 1+ charge state. An analysis of the detected noise levels reveals that for properly chosen instrument parameters, there is no significant steady-state heating of the Ni-6.5 Al-9.5 Cr at.% tips during PLAP tomography.